• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.196-196
• /
• 2008

We have investigated that the effect of post annealing on the structural and electrical properties of $Ba_{0.5}Sr_{0.5}TiO_3$ thin films. The BST thin films were deposited on n-type 4H-silicon carbide(SiC) using pulsed laser deposition (PLD). The deposition was carried out in oxygen ambient 100mTorr for 5 minutes, which results in about 300nm-thick BST films. For the BST/4H-SiC, 200nm thick silver was deposited on the BST films bye-beam evaporation. The X-ray diffraction patterns of the BST films revealed that the crystalline structure of BST thin films has been improved after post-annealing at $850^{\circ}C$ for 1 hour. The root mean square (RMS) surface roughness of the BST film measured by using a AFM was increased after post-annealing from 5.69nm to 11.49nm. The electrical properties of BST thin film were investigated by measuring the capacitance-voltage characteristics of a silver/BST/4H-SiC structure. After the post-annealing, dielectric constant of the film was increased from 159.67 to 355.33, which can be ascribed to the enhancement of the crystallinity of BST thin films.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.986-991
• /
• 2016

본 연구에서는 $Nb_2O_5/SiO_2$ 두개의 버퍼층위에 기판온도 (상온~$400^{\circ}C$) 에 따른 ITO 박막을 DC 마그네트론 스퍼터링 법으로 증착하여 전기적 및 광학적 특성을 조사하였다. 기판온도가 상승함에 따라 그레인 크기 증가에 기인한 결정성 향상 때문에 비저항이 낮아지는 경향을 나타내었다. 기판온도 $400^{\circ}C$ 에서 증착한 ITO 박막이 $3.03{\times}10^{-4}{\Omega}{\cdot}cm$ 의 비저항과 $86.6{\Omega}/sq.$의 면저항으로 가장 우수한 값을 나타내었다. 광학적 특성을 측정한 결과, 기판온도가 상승함에 따라 가시광 영역 (400~800nm) 에서의 평균 투과도는 증가하였으며 색도 ($b^*$) 값은 감소하였다. $400^{\circ}C$에서 증착한 ITO 박막의 평균 투과도와 색도 ($b^*$) 는 85.8% 와 2.13 으로 버퍼층이 삽입되지 않은 ITO 박막의 82.8% 와 4.56 에 비해 상당히 향상된 결과를 나타내었다. 이를 통해 $Nb_2O_5/SiO_2$ 두개의 버퍼층을 도입한 ITO 박막은 인덱스 매칭 효과로 인해 투과도 및 색도 ($b^*$) 등의 광학적 특성이 현저히 향상되었음을 확인할 수 있었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.211-213
• /
• 2005

[$SiO_2$] film coated as a passivation layer for YBCO based electronic devices is investigated by measuring the micro wave properties of micro strip line resonators. The $SiO_2$ film coated resonators are compared with coated resonators for two degradation conditions, a $200^{\circ}C$ annealing in air and an exposure to air at $85^{\circ}C\;85\%$ relative humidity. The $SiO_2$ film reduces the YBCO thin film degradation caused by oxygen stoichiometry change and reaction with water.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.938-940
• /
• 1999

We have fabricated SiC Schottky diode for high temperature applications. SiC thin film for drift region has been deposited by ICP-CVD. In order to establish metallization conditions, we have extracted the device parameters of the Schottky diode from the forward I-V characteristics and the C-V characteristics as a function of temperature. The ideality factor was varied from 2.07 to 1.15 and the barrier height was also varied from 1.26eV to 1.92eV with increase of temperature. The reverse blocking voltage was 183 V.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.98-98
• /
• 1998

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.46.1-46.1
• /
• 2010

Surface passivation of crystalline silicon(c-Si) surface with a-Si:H thin films has been investigated by using quasi-steady-state photo conductance(QSSPC) measurements. Analyzing the influence of a-Si:H film thickness, process gas ratio, deposition temperature and post annealing temperature on the passivation properties of c-Si, we optimized the passivation conditions at the substrate temperature of $200-250^{\circ}C$. Best surface passivation has been obtained by post-deposition annealing of a-Si:H film layer. Post annealing around the deposition temperature was sufficient to improve the surface passivation for silicon substrates. We obtained effective carrier lifetimes above 5.5 ms on average.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.139-140
• /
• 2008

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.174-178
• /
• 2005

Chemical vapor deposition technique has been used to grow epitaxial SiC thin films on Si wafers using tetramethylsilane(TMS) precursor. The films were observed to grow along (110) direction of 3C-SiC at $800^{\circ}C$. The quality of the films was significantly influenced by the TMS flow rate and growth temperature. Nanocrystal SiC films were grown at flow rates of TMS 10 sccm with $H_2$ carrier gas of 100 sccm. The temperature and gas pressure in the reactor have a great influence on the crystallinity and morphology of the SiC film grown. The growth mechanism of the SiC film on the Si substrate without the carbonization process was discussed based on the experimental results.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.81-89
• /
• 1994

전자빔 증착법을 사용하여 10nm두께의 Ti과 18nm두께의 Co를 Si(100)기판에 증착한 후, $N_{2}$분위기에서 $900^{\circ}C$, 20초 급속 열처리하여, Co/Ti 이중금속박막의 역전을 유도함으로서 $CoSi_{2}$박막을 형성하였다. 4점 탐침기로 측정한 면저항은 3.9Ω/ㅁ 었으며, 열처리 시간을 증가해도 이값은 유지하여 열적 안정성을 나타내었다. XRD 결과는 형성된 실리사이드는 기판과 에피관계를 갖는 $CoSi_{2}$상 임을 보였으며, SEM 사진은 평탄한 표면을 나타내었다. 단면 TEM 사진은 기판위에 형성된 박막층은 70nm 두께의 $CoSi_{2}$ 에피박막과 그위에 두개의 C0-Ri-Si합금층등 세개의 층으로 되어 있음을 보였다. AES 분석은, 기판상의 자연산화막을 형성할 수 있었음을 보여주었다. AES분석은, 기판상의 잔연산화막이 열처리초기, Ti에 의해 제거된후 Co가 원자적으로 깨끗한 Si기판에 확산하여 $CoSi_{2}$에피박막을 형성할 수 있었음을 보여주었다. $700^{\circ}C$, 20초 + $900^{\circ}C$, 20초 이중 열처리를 한 경우, $CoSi_{2}$결정성장으로 면저항값은 약간 낮아졌으나, 박막의 표면과 계면이 거칠었다. 이 $CoSi_{2}$에피박막의 실제 소자에의 적용방안과 막의 역전을 통한 에피박막형성의 기제를 열역학 및 kinetics 관점에서 고찰하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.983-988
• /
• 1997

We investigated the structural and dielectric properties of PZT(20/80)/PZT(80/20) heterolayered thin films that fabricated by the alkoxide-based Sol-Gel method. PZT(20/80)/PZT(80/20) heterolayered thin films were spin-coated on the Pt/Ti/SiO$_2$/Si substrate with PZT(20/80) film of tetragonal structure and PZT(80/20) film of rhombohedral structure by turns. Each layers were dried to remove the organic materials at 30$0^{\circ}C$ for 30min and sintered at $650^{\circ}C$ for 1hr. This procedure was repeated several times to form PZT(20/80)/PZT(80/20) heterolayered films and thickness of the film obtained by one-times of drying/sintering process was approximately 80-90nm. PZt-1, 3, 5 films with top layer of PZT(20/80) film of tetragonal structure showed fine grain structure and PZT-2, 4, 6 films with top layer of PZT(80/20) film of rhombohedral structure showed the dense grain microstructure without rosette-type. Dielectric constant and dielectric loss of the PZT-6 film were approximaterly 1385 and 3.3% respectively. Increasing the number of coatings remanent polarization was increased and coercive field was decreased and the values of the PZT-6 film were 8.13$\mu$C/cm$^2$and 12.5kV/cm respectively.