• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.46-54
• /
• 1993

$\beta$-SiC was chemically vapor deposited by pyrolysis of MTS＋H2 gas mixture. The experiments were conducted in the temperature range of 1100~150$0^{\circ}C$ with a r.f. induction furnace under atmospheric pressure. The IR, XRD, EDS and AES analysis revealed that the free Si was always codeposited with SiC below 140$0^{\circ}C$, regardless of the total flow rate and MTS concentration, whereas $\beta$-SiC single phase was deposited at 150$0^{\circ}C$. C3H8 or CH2Cl2 as an excess C sources, was supplied with MTS in order to obtain stoichiometric SiC at low temperature. With the addition of C3H8 or CH2Cl2, the deposition rate was increased and $\beta$-SiC single phase could be deposited even at temperature as low as 110$0^{\circ}C$. In the absence of C3H8 or CH2Cl2, the microhardness of the layer was quite low (

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.422-426
• /
• 1999

The Grignard reactions of bis(chloromethyl)dimethylsilane (1) with trimethylchlorosilane (2) in THF give both the intermolecular C-Si coupling and intramolecular C-C coupling products. At beginning stage, 1 reacts with Mg to give the mono-Grignard reagent ClCH2Me2SiCH2MgCl (1) which undergoes the C-Si coupling reaction to give MC2Si(CH2SiMe3)2 3, or C-C coupling to a mixture of formula Me3SiCH2(SiMe2CH2CH2)nR1 (n = 1, 2, 3, ..; 4a, R1I = H: 4b, R1 = SiMe3). In the reaction, two reaction pathways are involved: a) Ⅰ reacts with 2 to give Me3SiCH2SiMe2CH2Cl 6 which further reacts with Mg to afford a Me2SiCH2Mel-SiCH2MgCl (Ⅱ) or b) I cyclizes intramolecularly to a silacyclopropane intermediate A, which undergoes a ring-opening polymerization by the nucleophilic attack of the intermediates I or Ⅱ, followed by the termination reaction with H2O and 2, to give 4a and 4b, respectively. As the mole ratio of 2/1 increased from 2 to 16 folds, the formation of product 3 increased from 16% to 47% while the formation of polymeric products 4 was reduced from 60% to 40%. The intermolecular C-Si coupling reaction of the pathway a becomes more favorable than the intramolecular C-C coupling reaction of the pathways b at the higher mole ratio of 2/1.

• Tribology and Lubricants
• /
• 제4권2호
• /
• pp.44-51
• /
• 1988

Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

• 한국결정성장학회지
• /
• 제4권3호
• /
• pp.262-275
• /
• 1994

SiC/C계 경사기능재료를 화학기상증착법에 의하여 흑연기판위에 증착시키고자 하였다. 본 실험에서 경사기능재료의 최적증착조착조건은 온도 $1300^{\circ}C, H_2/[SiCl_4+CH_4]=10, CH_4/[$SiCl_4+CH_4]=0.5-0.6$이었다. 불연속적인 입력개시비의 변화에도 불구하고 연속적으로 조성이 변화된 경사기능재료를 얻을 수 있었으며, 명확한 계면이 존재하지 않는 연속적인 구조변화가 주사전자현미경 관찰로 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.573-578
• /
• 2003

Low temperature selective epitaxial growth of Si and SiGe has been obtained using an industrial single wafer chemical vapor deposition module operating at reduced pressure. Epitaxial Si and heteroepitaxial SiGe deposition with Ge content about 20 % has been studied as extrinsic base for self-aligned heterojunction bipolar transistors(HBTs), which helps to reduce the parasitic resistance to obtain higher maximum oscillation frequencies(f$\_$max/). The dependence of Si and SiGe deposition rates on exposed windows and their evolution with the addition of HCl to the gas mixture are investigated. SiH$_2$Cl$_2$ was used as the source of Si SEG(Selective Epitaxial Growth) and GeH$_4$ was added to grow SiGe SEG. The addition of HCl into the gas mixture allows increasing an incubation time even low growth temperature of 675∼725$^{\circ}C$. In addition, the selectivity is enhanced for the SiGe alloy and it was proposed that the incubation time for the polycrystalline deposit on the oxide is increased probably due to GeO formation. On the other hand, when only SiGe SEG(Selective Epitaxial Growth) layer is used for extrinsic base, it shows a higher sheet resistance with Ti-silicide because of Ge segregation to the interface, but in case of Si or Si/SiGe SEG layer, the sheet resistance is decreased up to 70 %.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.845-851
• /
• 2002

The synthesis of the intramolecular donor - stabilized silyl and germyl complexes of the type ($Cab^c.p) MMe_2X$ (2a:M=Si, X=Cl;2b;M= Ge, X=Cl;2e;M=Si,X=H) was achieved by the reaction of $LiCab^c,p$ (1) with $Me_2SiClX$ and $Me_2GeCl_2$ respectively. The intramolecular M←P interacion in 2a-2c is provided by $^1H$, $13^C.$, $31^P$ and $29^Si$ NMR spectroscopy. The salt elimination reactions of dichlorotetramethyldisilane and -digermane with 1 afforded the $bis(\sigma-carboranylphosphino)disilane$ and disgermane [$(Cab^C.P)MMe_2]_2(4a;M$ = Si;4b: M=Ge). The oxidative addition reaction of 4a-4b with $pd_2(dba)_3CHCl_3afforded$ the bis(silyl)-and bis(germyl)-palladium complexes. The chloro-bridged dipalladium complexes were obtained by the reaction of 2a-2b with $pd_2(dba)_3CHCl_3$ The crystal structures of 5a and 7b were determined by X-ray structural studies.

• 대한전자공학회논문지
• /
• 제22권1호
• /
• pp.34-40
• /
• 1985

시스뎀 압력이 1.0 기압[대기압 공정]일 경우와 0.1 기압(감압 공정)일 경우에 대해, SiH2Cl2를 사용했을 때의 에퍼택셜층 및 폴리실리콘의 성장 현상과 HCI을 사용했을 때의 이것들의 에칭 현상을 조사하였다. 실험적으로 구한 성장 속도 및 에칭 속도에 대한 식들로부터 Sih2Cl2와 HCI을 혼합하여 사용할 경우에 대한 선화적 에퍼택시가 가능한 공정 조건이 예측되었다. 그 결과, 선택적 에퍼택셜 성장 영역이 감압 공정에서는 실험 범위내에서 존재하였지만 대기압 공정에서는 존재하지 않는 것으로 나타났다. 이 것은 대기압과 감압에서의 성장 속도 및 에칭 속도가 차이가 나기 때문에 기인하는 것이다.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.172-177
• /
• 1996

We have characterized XeCl excimer-laser-induced crystallization of thin amorphous silicon films deposited by PECVD (${\alpha}$-Si:H) and LPCVD (${\alpha}$-Si). The electrical properties, surface roughness and crystallinity of crystallized thin films have been measured. The dc conductivities, crystallinity andsurface roughness of the films increased as the laser energy density and shot density were increased. The properties of laser annealed films deposited by LPCVD were better than those of thin films deposite by PECVD. We have also found that the multiple shots with relative low energy density were more benifical to the improsvement of surface roughness than the single shot with high energy density preserving the crystallinity.

• 센서학회지
• /
• 제6권3호
• /
• pp.200-206
• /
• 1997

열산화시킨 실리콘 웨이퍼 위에 저압화학기상성장법으로 $SiCl_{2}H_{2}$, $NH_{3}$ 및 $N_{2}O$ 기체를 사용하여 실리콘 옥시나이트라이드($Si_{x}O_{y}N_{z}$) 층을 제작하였다. 세 가지의 다른 조성이 기체 유속비($NH_{3}/N_{2}O$)를 각기 0.2, 0.5 및 2로 변화시키고 $SiCl_{2}H_{2}$의 기체 유속은 고정시킴으로써 얻어졌다. 엘립소메트리와 HFCV(High Frequency Capacitance-Voltage) 측정법을 채택하여 굴절율, 유전율 및 조성의 차이를 각각 조사했다. 실리콘 옥시나이트라이드는 내부에 포함된 실리콘 나이트라이드 성분량에 관계없이 용액 중에서 순수한 실리콘 나이트라이드와 유사한 안정성을 보유했다. 실리콘 옥시나이트라이드 층 알칼리이온 감지성의 크기 순서는 실리콘 나이트라이드 성분량에 영향을 받았다. 보다 나은 알칼리이온 감지성이 실리콘 옥시나이트라이드의 벌크 내에 있는 실리콘 디옥시드의 성분량을 증가시킴으로써 얻어졌다.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.405-412
• /
• 2009

In high temperature ceramic glazes, a stable range of pink-red colors that produced $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments were factored by Cassiterite($SnO_2$) and Malayaite($CaSnSiO_5$) by $Cr_2O_3$. The experiment examined the influence of $CrCl_3$, a Sn-Cr substitution added with a mineralizer ($H_3BO_3$), as a chromophore in pigments. The experiment also studied the effect of $H_3BO_3$ (2 wt%) when added to malayaite($CaSnSiO_5$) to see if the crystalline reaction will increase. $Cr_2O_3$ was also substituted with $CrCl_3$ in order to prove how much influence $CrCl_3$ had on the $H_3BO_3$. Malayaite and cassiterite were the basic compound materials and the experiment was conducted both with and without mineralizers (2 wt% of $H_3BO_3$). Each compound was synthesized at 800, 1000, 1200, 1300, 1400, $1500^{\circ}C$ for 2 h. Synthesized pigments were analyzed by XRD, FT-IR and UV-Vis. The temperature variation produced two crystal phases that showed the different engaging effects of Cr oxidation. $CrCl_3$ produced a better effect on the malayaite crystal phase, resulting in a more defined pigmentation of the pink-red coloration compared to $Cr_2O_3$.