• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.42-48
• /
• 2018

Silicon has attracted extensive attention due to its high theoretical capacity, low discharge potential and non-toxicity as anode material for lithium ion batteries. In this study, Si-CNT-C composites were fabricated for use as a high-efficiency anode material in a lithium ion battery. Aerosol self-assembly and post-heat treatment processes were employed to fabricate the composites. The morphology of the Si-CNT-C composites was spherical and an average particle size was $2.72{\mu}m$. The size of the composite increased as concentration of Si and CNT increased in the precursor solution. In the Si-CNT-C composites, CNT and C carbonized from glucose were attached to the surface of Si particles. Electrochemical measurement showed that the cycle performance of Si-CNT-C composites was better than that of silicon particles.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.327-333
• /
• 2022

In this study, silicon/carbon nanotube/carbon (Si/CNT/C) composites for anode were prepared to improve the volume expansion of silicon used as a high-capacity anode material. Si/CNT were prepared by electrostatic attraction of the positively charged Si and negatively charged CNT and then hydrothermal synthesis was performed to obtain the spherical Si/CNT/C composites. Poly(vinylidene fluoride) (PVDF), polyacrylic acid (PAA), and styrene butadiene rubber (SBR) were used as binders for electrode preparation, and coin cell was assembled using 1.0 M LiPF₆ (EC:DMC:EMC = 1:1:1 vol%) electrolyte and fluoroethylene carbonate (FEC) additive. The physical properties of Si/CNT/C anode materials were analyzed using SEM, EDS, XRD and TGA, and the electrochemical performances of lithium-ion batteries were investigated by charge-discharge cycle, rate performance, dQ/dV and electrochemical impedance spectroscopy tests. Also, it was confirmed that both capacity and rate performance were significantly improved using the PAA/SBR binder and 10 wt% FEC-added electrolyte. It is found that Si/CNT/C have the reversible capacity of 914 mAh/g, the capacity retention ratio of 83% during 50 cycles and the rate performance of 70% in 2 C/0.1 C.

• Composites Research
• /
• v.28 no.4
• /
• pp.226-231
• /
• 2015

Various characteristics(thermal expansion, microstructure, etc.) and mechanical properties of CNT-aluminum nano composites manufactured by volume production system were evaluated. Also, formability and durability were evaluated for potential applications in automotive parts, via compared with high-elasticity material (A390) and the current commercial product. As a result, this composite has excellent mechanical properties and formability, therefore, to verity its potential for application as light and high strength materials in automobile part.

• Journal of Ceramic Processing Research
• /
• v.21 no.2
• /
• pp.170-191
• /
• 2020

As interest in environmental pollution has increased, research in the field of filtration has been concentrated. While various types of filters have been developed, research on nanomaterial filtration has been limited. Since then, the development of new materials such as carbon nanotubes (CNTs) has accelerated the study of new filters. Especially, CNTs have been among the most attractive materials ever synthesized for the development of nano-technologies. However, there are fundamental technical problems to be solved the development of new CNT composites. One of these problems is the development of a CNTs filter with excellent adsorption behavior and a filter that is capable of filtering a specific substance. In addition, it is necessary to develop a technology to increase the uniform distribution of CNTs, and to reduce the high processing cost of CNT composite production. In general, the chemical pathways for the production of CNTs include hydrocarbon gases, such as methane (CH4) and acetylene (C2H2), through metal nanoparticle catalysts. However, nano-metal particles have a strong coagulation phenomenon at high temperature by catalytic chemical vapor deposition (CCVD) method. In this review, attempts were made by applying three different reaction techniques to form CNTs on biomorphic carbon materials (BCM) coated with catalyst materials to control the shape and size of CNTs. Hierarchical carbon substrates with pore size of 100 ~ 300 ㎛ were developed using carbonization reaction. Linde type A (LTA) zeolite, silicalite-1, and mesoporous SiO2 template crystals were simultaneously synthesized and coated on the BCM by an in-situ hydrothermal process to synthesize high-yield CNTs composites.