• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.804-810
• /
• 2003

The fine powder produced by heating and grinding of the waste concrete in the waste construction was investigated whether utilize as substitution raw material of SiO$_2$, CaO, and Al$_2$O$_3$ source for OPC clinker manufacture is possible or not. In order to synthesize OPC clinker, limestone, shale, converter slag and fly ash were used as main raw materials, and modulus was fixed LSF 91.0, SM 2.60, IM 1.60. The synthesized clinkers were characterized. The Main products of synthesized clinker were C$_3$S, ${\beta}$-C$_2$S, C$_3$A, C$_4$AF as OPC clinker at 1,43$^{\circ}C$. As a result of TG-DTA and burnability index(B.U) analysis of each raw mixtures, the formation temperature of clinker phases was similar and B.I was showed easy burning as 48.6∼51.4.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.235-242
• /
• 2010

Froth flotation using the residual water in the end of flotation process has been performed through controlling of pH. IEP (isoelectric point) of molybdenite and quartz in distilled water was below pH 3 and pH 2.7, respectively and the stabilized range was pH 5~10. In case of a suspension in reusing water, zeta potential of molybdenite decreased to below -10 mV or less at over pH 4 due to residual flocculants. As result of pH control, flotation efficiency in the alkaline conditions was deteriorated by flocculation, resulting from expanded polymer chain, ion bridge of the divalent metal cations ($Ca^{2+}$), and hydrophobic interactions between the nonpolar site of polymer/the hydrophobic areas of the particle surfaces. However, the weak acid conditions (pH 5.5~6) improved the efficiency of flotation as hydrogen ions neutralize polymer chains and then weakened its function. In cleans after rougher flotation, the Mo grade of 52.7% and recovery of 90.1% could be successfully obtained under the conditions of 20 g/t kerosene, 50 g/t AF65, 300 g/t $Na_2SiO_3$, pH 5.5 and 2 cleaning times. Hence, we developed a technique which can continuously supply waste water filtered from tailings into the grinding-rougher-cleaning processes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.185-194
• /
• 2022

Coffee is one of the most consumed beverages in the world and is the second largest traded commodity after petroleum. Due to the great demand of this product, large amounts of waste is generated in the coffee industry, which are toxic and represent serious environmental problems. This study aims to study the possibility of recycling spent coffee grounds (SCG) as a mineral admixture by replacing the cement in the manufacturing of concrete. To recycle the coffee g rounds, the SCG was dried to remove moisture and fired in a kiln at 850 ℃ for 8 hours. Carbonized coffee grounds are produced as coffee grounds ash (CGA) through ball mill grinding. The chemical composition of the prepared coffee grounds ash was investigated using X-ray fluorescence (XFR). According to the chemical composition analysis, the major elements of coffee grounds ash are K₂O(51.74 %), CaO(15.92 %), P₂O₅(14.39 %), MgO(7.74 %) and SO₃(6.89 %), with small amounts of F₂O₃(0.66 %), SiO₂(0.59 %) and Al₂O₃(0.31 %) content. To evaluate quality and mechanical properties, substitutions of 5, 10, and 15 wt.% of coffee grounds ash (CGA) were tested. From the quality test results, the 28-day activity index of CGA5 reached 80 %, and the flow value ratio reached 96 %, which is comparable to the minimum requirement for second-grade FA. From the test results of the mortar, the optimal results have been found in specimens with 5 wt-% coffee grounds ash, showing good mechanical and physical properties.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.14-22
• /
• 1992

As a basic study to recover the copper from the copper converter slag, the characterisitcs of converter slag was studied. The results obtained in this work are as follows. 1. The copper converter slag is composed of Cu, $Cu_2$S, $Fe_3$$O_4$, Fayalite and silicate. 2. It is supposed that magnetite in converter slag is oxidized to hematite at $720^{\circ}C$ and this phase is soluted to fayalite. 3. As the converter slag is added in the water solution, pH increased and the heavy metal ions in the water are adsorbed on the slag. 4. Work index of the converter slag cooled for the 10 hour and the 2 hour are 25~27 kWh/ton and 35 kWh/ton, respectively. 5. In the case of grinding test of converter slag, fayalite in converter slag is easily grinded than magnetite in converter slag.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.400-406
• /
• 2002

In case of doenjang, solution of browning problem might be an important remedy in order to dissolve consumers' dissatisfaction, therefore this study was performed to develop traditional doenjang which has improved in color aspect for consumers' needs. Physicochemical compositions and color values of commercialized traditional doenjang which was processed by history references of our country, were analyzed. doenjang used as samples were processed with traditional meju, which were made with soybean and mixed with various rates after following process such as soaking, steaming, cooling, chopping and grinding. The doenjang processed were storaged at $30^{\circ}C$ for 27 days, and their amino-N, pH, color values and sensory evaluation were analyzed with fermentation period. Furthermore, nitrogen results analyzed were compared with that of commercialized traditional doenjang. In the comparison with control, treated with only traditional meju, and doenjang treatments processed with different mixing rates of traditional meju and steamed soybean, the content of amino-N in control were higher than the others, and the contents of amino-N decreased with increasing contents of steamed soybean. Their pH were changed weak alkalic region into weak acidic region with fermentation period. In the aspect of color, traditional doenjang having the rate of traditional meju and steamed soybean (1:4) was most improved and also, in comparison of result of sensory evaluation with commercial traditional doenjang, its color, taste and falvor were evaluated predominent, therefore it might be thought to have competition on the market.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1447-1456
• /
• 2015

Olive flounder (Paralichthys olivaceus) including red seabream (Pagrus major) and jacopever (Sebastes schlegeli) were known to be suitable characteristics for preparing a processed food because of white meat fish containing low fat in muscle. In this study, the physicochemical properties of olive flounder (46-50 cm of length, 950-1,050 g of weight), red seabream (30-33 cm of length, 1,250-1,350 g of weight) and jacopever (20-23 cm of length, 550-650 g of weight) were studied to obtain a basic data for the development of a new processed food. Head, scale, bone and viscera of each samples were removed, and then grinding with homogenizer before experiment. Moisture content of red seabream is lower than that of olive flounder and jacopever, therefore, crude protein and crude lipid are higher content. Red seabream showed higher redness, yellowess and color difference value than those of olive flounder and jacopever except lightness. The major total amino acid in olive flounder, seabream and jacopever were glutamic acid, lysine and aspartic acid in order. Especially, the highest content of free amino acid was lysine for olive flounder and jacopever and alanine for red seabream. The highest content of mineral in olive flounder, seabream and jacopever was potassium (K) and then phosphorous (P) and sodium (Na) in order. The highest amount of fatty acid in olive flounder, red seabream and jacopever was polyenoic acid in which especially contained 6.8, 7.1 and 6.7% for EPA, and 15.2, 15.2 and 17.1% for DHA, respectively. From the result of sensory evaluation, there was no significant difference in color and odor, but not in taste and texture.