• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.111-117
• /
• 2003

We collected the domestic and foreign half-mirror coating lens for sunglasses. Their reflectance is measured using Spectrophotometer in order to analysis their optical property and the result which is calculated using Macleod program was compared with measured reflectance. In addition, we designed the new half-mirror coating lens with gold color using TiN material and investigated the optical property of the new half-mirror coating lens. The results obtained from analysis of half-mirror coating lenses are as follow : Two-tone half-mirror coating with silver color is fabricated with [air|$SiO_2$(or $Al_2O_3$)|Cr|glass]. The role of $SiO_2$(or $Al_2O_3$) on Cr improve the hardness of the lens and the thickness of the $Al_2O_3$ with 10 nm is good to show the lens silver color. Incase of color half-mirror coating lens. Blue system is designed by [air|$SiO_2$(66.3)|$TiO_2$(129.0)|$SiO_2$(62.9)|$SiO_2$(26.0)|$TiO_2$(120.3)|$SiO_2$(9.1)|glass], gold system [air|$SiO_2$(60.6)|$TiO_2$(86.2)|$SiO_2$(13.5)|$TiO_2$(86.8)|$SiO_2$(214.38)|glass], green system[air|$SiO_2$(74.3)|$TiO_2$(75.8)|$SiO_2$(44.3)|$TiO_2$(11.6)|$SiO_2$(160.8)|$TiO_2$(12.9)|$SiO_2$(183.3)|$TiO_2$(143.8)|glass], silver system[air|$SiO_2$(21.2)|$TiO_2$(49.7)|$SiO_2$(149.3)|glass]. White half-mirror coating lens has [air|$SiO_2$(17 nm)|$TiO_2$(43 nm)(or $ZrO_2$)|$SiO_2$(87 nm)|polysiloxane($4.46{\mu}m$|glass or CR-19]. It has half-mirror coaling lens which has about 19% reflectance and about 80% transmittance in the range of visible light(400~700nm). we designed the new half-mirror coating lens with gold color, the (x, y) value of the CIE is almost similar to the CIE value of [air|$SiO_2$(170 nm)|TiN(15 nm)|glass].

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.765-770
• /
• 2017

GTD111 DS of nickel base superalloy has been used for gas turbine blades. In this study, low cycle fatigue test was conducted on the GTD111 DS alloy by setting conditions similar to the real operating environment. The low cycle fatigue tests were conducted at room temperature, $760^{\circ}C$, $870^{\circ}C$, and various strain amplitudes. Test results showed that fatigue life decreased with increasing total strain amplitude. Cyclic hardening response was observed at room temperature and $760^{\circ}C$; however, tests conducted at $870^{\circ}C$ showed cyclic softening response. Stress relaxation was observed at $870^{\circ}C$ because creep effects occurred from holding time. A relationship between fatigue life and total strain range was obtained from the Coffin-Manson method. The fratography using a SEM was carried out at the crack initiation and propagation regions.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.888-894
• /
• 1998

In order to investigate the radioprotective effect of Si-Wu-Tang (Korean name: Sa-Mul-Tang), a kind of traditional Oriental medicine as a blood-building decoction (Oriental medical concept: Bu-Xie), and Si-Jun-Zi-Tang (Korean name: Sa-Gun-Ja-Tang), one of the widely used Oriental herbal medicines as an energy tonic (Chinese medical concept: Bu-Qi). the jejunal crypt survival, endogenous spleen colony formation, and apoptosis in jejunal crypt cells were observed in irradiated mice. Jejunal crypts were protected by Si-Wu-Tang pretreated both per os (2 mg/mL of drinking water for 7 days, p<0.05) and intraperitoneally (1 mg/head, single injection at 24 hours before irradiation). Si-Wu-Tang adminstration before irradiation(1 mg/head, single injection at 24 hours before irradiation) resulted in an increase of the formation of endogenous spleen colony (p<0.005). The frequency of radiation-induced apoptosis in intestinal crypt cells was also reduced by pretreatment of Si-Wu-Tang (p<0.01). However, the radioprotective effect of Si-Jun-Zi-Tang was not as significant as that of Si-Wu-Tang. These results suggest that Si-Wu-Tang may be a useful radioprotective food, especially since it is a relatively nontoxic natural product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.111-111
• /
• 2009

In this work, we discuss simulation of surface acoustic wave device using Comsol Multiphysics. The structure SAW device based on piezoelectric thin film aluminum-nitride (AlN) on silicon was simulated. Some parameters of SAW device such as surface velocity, displacement of piezoelectric thin film were evaluated by software. Many modes and shapes of wave are also discussed in this paper. For evaluation physical parameters of AlN piezoelectric layer, the SAW resonator was modeled and simulation results were also compared with experiment results. we simulated arid evaluated the surface Rayleigh wave of AlN thin film on silicon substrate. Results simulation and experiment showed the surface velocity of AlN thin film was about 5200 m/s and shape of surface wave was also displayed. This paper has also proposed as method to study SAW characteristic of piezoelectric thin film and found out measurement values accurately of film such as stiffness matrix, piezoelectric matrix. These values are very important in calculation and design SAW device or MEMS device based on AlN piezoelectric layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.111.2-111.2
• /
• 2011

야금학적 방법을 통한 태양전지용 실리콘 제조를 위하여 아크로(Arc furnace)에서 제조된 용융 상태의 금속급 실리콘을 슬래그와 직접 반응시켜 불순물을 제거하는 공정에 관한 연구를 수행하였다. 이를 위해 아크로와 고주파 유도용해로(High-frequency induction furnace)를 이용하여 금속급 실리콘을 제조와 정련 특성 실험을 수행하였다. 본 연구에서 금속급 실리콘을 제조하기 위한 장비로 150kW급-DC 아크로와 300kW급-AC 아크로를 사용하였다. 원재료로 규석, 코크스(Cokes), 숯, 그리고 우드칩(Wood chip)을 실험 비율에 맞춰 아크로 내부에 장입하고, 이를 용융환원 방법을 통해 반응을 시켰다. 이때 생산된 금속급 실리콘의 순도는 약 99.2~99.8% 이었으며, 원재료의 순도, 장입 비율 및 아크로 운전 특성에 따라 편차가 있다. 아크로에서 생산된 금속급 실리콘의 경우 인(phosphorus), 붕소(boron)를 다량 함유하고 있고, 이를 제거하기 위하여 50kW급 고주파 유도용해로 장비를 사용하여 슬래그 정련 실험을 수행하였다. 슬래그 정련시 사용한 성분은 SiO2, CaO 그리고 CaF2 이며, 금속급 실리콘과 슬래그의 질량비 및 반응 시간에 따른 실리콘 불순물 특성을 평가하였다. 실험결과 인과 붕소는 각각 1 ppm 이하, 5 ppm 이하 였으며, 칼슘을 제외한 대부분의 금속 불순물의 경우 0.1~0.2% 임을 확인하였다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.91-95
• /
• 1998

Exchange anisotropy between IrMn antiferromagnetic layer and NiFe ferromagnetic layer has been studied in IrxMn(100-x)/NiFe/Buffr/Si(100) films deposited by D. C. magnetron sputtering method. Among Zr, Ta, and Cu used as buffer layer, Zr and Ta enhanced the fcc(111) texture of NiFe and IeMn layer, but Cu did not affect microstructure of those layer. Strong fcc(111) texture of IrMn layer was confirmed to be the origin of exchange anisotropy of IrMn. Ir composition control in IrMn layer showed that {{{{ gamma -phase}}}} IrMn is stabilized between 10 and 30 at % Ir, an 21 at. % Ir in IrMn layer was optimum composition that showed maximum exchange anisotropy field. above 200 ${\AA}$ thickness of IrMn, antiferromagnetic property is stabilzed to show saturated exchange anisotropy field. Based pressure was confirmed to be critical requisite in IrMn-based spin-valve GMR system.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.308-313
• /
• 1999

This paper will present an anisotropic etching in TMAH technique used in the fabrication of three-dimensional magnetic field vector sensor based on angled Hall plate structure. This sensor design relies on simultaneously detecting all magnetic field vector components using Hall plates that are imbedded into the silicon [111] sloped-surface of bulk micromachined cavity by the anisotropic etching of [100] silicon. The fabricated Hall elements has relatively improved sensitivity compare to convensional Hall elements for three-dimensional magnetic field sensing. The product sensitivity of 547V/AT at the supply current of 1.0mA was achived. The corresponding limit in the detection of magnrtic field is 0.07G that calculated by measured power spectral density(PSD) in magnetic sensor output.

• The Korean Journal of Emergency Medical Services
• /
• v.24 no.2
• /
• pp.111-121
• /
• 2020

Purpose: The purpose of this study was to compare visual blood loss estimation and subjective emergency according to clothing color. Methods: This is a quasi-experimental study which involved the use of mock bleeding patients wearing different colors tops. Results: Differences in visual estimates according to clothing color were significant in both paramedic students (F=6.69, p=.002) and the general department students (F=20.92, p=.000). When looking specifically at the accuracy of visual estimates, the paramedic students group tended to underestimate (50% white, 62.5% black, 32.5% yellow) the actual blood volume in all experimental conditions. On the other hand, the general department group tended to overestimation (45% white, 40% black, 67.5% yellow). The subjective emergency was also found to differ between paramedic students (F=13.58, p=.000) and general department students (F=9.67, p=.000). Conclusion: Paramedics treating bleeding patients at pre-hospital stages need to pay attention to blood loss estimations depending on clothing color, a factor not to be neglected or underestimated.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.111-120
• /
• 2012

Industrial wastes of crosslinked polymers have been burned or disposed of in landfills because there is no recycling technology due to their insoluble and infusible network chain structure. However, recycling of cross-linked polymers has been taken a growing attention because of issues of environmental pollution and of resources conservation. In this paper, uprising recycling technologies of crosslinked polymers using supercritical fluid are reviewed.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.365-373
• /
• 1997

다이아몬드 형성에 미치는 MPECVD 증착조건에 관하여 연구하였다. 증착 실험 기판은 Si p-type (100)wafer를 사용하였으며 다이아몬드 박막은 다음과 같은 조건하에서 증착되었다. 메탄 농도:0.75%(3scm)-3%(12scm),산소 농도:0%-0.5%(2scm), 반응 압력:20torr-80torr, 반응 온도:$600^{\circ}C$-90$0^{\circ}C$. 낮은 증착온도($600^{\circ}C$)에서는 (100)의 우선성장면을 보였고 온도가 증가함에 따라 (100)과 (111)이 혼재된 cubo-octahedron이 형성되었고 90$0^{\circ}C$에서는 (111)의 우선성장면을 가징 octahedron이 형성되었다. 산소가 첨가됨에 따라 높은 메탄농도에서도 양질의 다이아몬드가 형성되었다. 낮은 압력하(200torr)에서는 비정질탄소가, 높은 압력하(80torr)에서는 양질의 다이아몬드가 형성되었다.