• 한국정보통신학회논문지
• /
• 제17권4호
• /
• pp.805-814
• /
• 2013

2012년 12월 30일에 아날로그 TV 방송이 종료됨에 따라 UHF 디지털 여유 대역(698-806MHz)이 LTE(Long Term Evolution)와 같은 이동통신용으로 활용이 가능해졌다. 본 대역이 LTE로 할당되었다고 가정하고 IMT-Advanced 기술 평가를 위하여 개발한 LTE 어드밴스트 시스템 레벨 시뮬레이터를 이용하여 LTE와 인접 DTV 대역과의 간섭 평가를 수행하였다. UHF 디지털 여유대역에 LTE가 서비스 될 경우 LTE 단말이 DTV 수신기에 주는 간섭과 DTV 송신기가 LTE 기지국에 간섭 평가를 통해 공유 조건을 연구결과로 제시한다. 아울러 연구결과에 의한 공유조건은 본 대역에서 LTE 시스템이 구현될 때 네트워크 제어 알고리즘에 활용가능하다.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.49-56
• /
• 2012

The purpose of this paper is to present a model for operating an emergency power system(EPS) that can secure a sufficient power supply used in case of a fire by analyzing the status of power supplies for emergency and firefighting operations. Investigations on the one of the causes of the operational failure of firefighting systems show evidence of EPS. Generally, when power to a building is interrupted, EPS supplies the emergency load(excepted firefighting load) first. When a power outage and a fire occur simultaneously, the EPS must be able to supply both the emergency load and the firefighting load, especially the firefighting load to the end. However, in order to save construction costs, emergency power generators in apartment, commercial, and business buildings can satisfy only one of the required loads. In cases like this, when a power outage and a fire occur simultaneously, there is a danger of firefighting equipment not operating due to insufficient power supply from the emergency generator. Therefore, an EPS must have a reserved firefighting power that can supply both the firefighting and the emergency load. Such EPS, when faced with a danger of an overload, will shut down the supply to all or part of the emergency load, thus securing a continuous power supply to the firefighting equipment. The generator power system with reserved firefighting power (RFP) will also have an indicator to show that the selective control is being used. General power generation systems for emergency load and firefighting load were found to have a demand factor of 50-60% with a lump. However, when installing an EPS, the builders must choose the higher demand factor suggested according to the official approval demand factor of the building.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.460-469
• /
• 2010

To develop coal gasfication system, many studies have been actively conducted to describe the simulation of steady state. Now, it is necessary to study the gasification system not only in steady state but also in dynamic state to elucidate abnormal condition such as start-up, shut-down, disturbance, and develop control logic. In this study, a model was proposed with process simulation in dynamic state being conducted using a chemical process simulation tool, where a heat and mass transfer model in the gasifier is incorporated, The proposed model was verified by comparison of the results of the simulation with those available from NETL (National Energy Technology Laboratory) report under steady state condition. The simulation results were that the coal gas efficiency was 80.7%, gas thermal efficiency was 95.4%, which indicated the error was under 1 %. Also, the compositions of syngas were similar to those of the NETL report. Controlled variables of the proposed model was verified by increasing oxygen flow rate to gasifier in order to validate the dynamic state of the system. As a result, trends of major process variables were resonable when oxygen flow rate increased by 5% from the steady state value. Coal flow rate to gasifier and quench gas flow rate were increased, and flow rate of liquid slag was also increased. The proposed model in this study is able to be used for the prediction of gasification of various coals and dynamic analysis of coal gasification.

• 한국압력기기공학회 논문집
• /
• 제17권1호
• /
• pp.18-27
• /
• 2021

This study aims to develop an improved evaluation technology for assessing CANDU-6 safety. For this purpose, the multiple steam generator tube rupture (mSGTR) followed by an unmitigated station blackout (SBO) in a CANDU-6 plant was selected as a hypothetical event scenario and the analysis model to evaluate the plant responses was envisioned into the MARS-KS input model. The model includes logic models for controlling the pressure and inventory of the primary heat transport system (PHTS) decreasing due to the u-tubes' rupture, as well as the main features of PHTS with a simplified model for the horizontal fuel channels, the secondary heat transport system including the shell side of steam generators, feedwater and main steam line, and moderator system. A steady state condition was successfully achieved to confirm the stable convergence of the key parameters. Until the turbine trip, the fuel channels were adequately cooled by forced circulation of coolant and supply of main feedwater. However, due to the continuous reduction of PHTS pressure and inventory, the reactor and turbine were shut down and the thermal-hydraulic behaviors between intact and broken loops got asymmetric. Furthermore, as the conditions of low-flow coolant and high void fraction in the broken loop persisted, leading to degradation of decay heat removal, it was evaluated that the peak cladding temperature (PCT) exceeded the limit criteria for ensuring nuclear fuel integrity. This study is expected to provide the technical bases to the accident management strategy for transient conditions with multiple events.

• 한국해양학회지:바다
• /
• 제11권4호
• /
• pp.133-144
• /
• 2006

해수 소통이 전제된 새만금호의 내부 관리수위를 유지하는 최적의 수문 운영안이 ADCIRC모형을 적용한 실험을 통해 검토되었다. 수문 완공 이후와 내부개발 이후로 사업진행을 구분하였고 평수시와 풍수시로 하천유량을 구분하여 모델링을 실시하였다. 수문 운영방안은 유입/배출이 연속적으로 1일 1회, 1일 2회 및 2일 1회 등에 대해 검토되었으나 모든 경우 하천 유입 유량에 의해 수위가 지속적으로 상승된다. 목표 관리수위 0.0m를 유지할 수 있는 현실적인 방안으로는 방조제 완공 직후에는 1일 2회의 유입/배출을 유지하면서 평수시에는 단속적으로 6일에 한번, 풍수시에는 3일에 한번 외해수의 유입을 억제시키면 최대편차 ${\pm}0.4m$ 이내에서 관리수위 유지가 가능한 것으로 분석되었다.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.140-146
• /
• 2005

Fossil fired power plant produces the electric energy by using a thermal energy by the combustion of fossil fuels as like oil, gas and coal. The exhausted flue gas by the combustion of oil etc. contains usually many contaminated species, and especially sulfur-content has been controlled strictly and then FGD (Flue Gas Desulfurization) facility should be installed in every fossil fired power plant. To minimize the content of contaminations in final exhaust gas, high corrosive environment including sulfuric acid (it was formed during the process which $SO_2$ gas combined with $Mg(OH)_2$ solution) can be formed in cooling zone of FGD facility and severe corrosion damage is reported in this zone. These conditions are formed when duct materials are immersed in fluid that flows on the duct floors or when exhausted gas is condensed into thin layered medium and contacts with materials of the duct walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of those ducts. The frequent shut down and repairing works of the FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, corrosion problems have severely occurred in a cooling zone even though high corrosion resistant materials were used. In this work, a new technology has been proposed to solve the corrosion problem in the cooling zone of FGD facility. This electrochemical protection system contains cathodic protection method and protection by coating film, and remote monitoring-control system.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.45-63
• /
• 2017

한국의 가장 오래된 상업 원전인 고리 1호기가 2017년에 해체가 이루어질 예정이다. 원전 해체 폐기물의 적절한 처리는 효율적인 원전해체에 있어 중요한 역할을 할 것이다. 특히, 저준위 또는 오염되지 않은 금속폐기물의 재활용은 폐기물 발생 저감은 물론 처분장의 공간을 절약하는데 기여할 것이다. 본 논문은 재활용 시스템의 개념설계와 정의된 업무 흐름에서 발생하는 피폭 선량을 평가하는데 그 목적이 있다. 작업의 흐름과 운전 개념을 정립하기 위해 다양한 형태의 다이어그램을 설계하였다. 선량평가에 필요한 시나리오는 개념설계를 기반으로 선정되었으며, RESRAD-RECYCLE을 이용하여 선량을 평가하였다. 이를 통하여, 결정적 시나리오 선별, 핵종 특성 및 핵종 분배가 선량에 미치는 영향을 분석하였다. 더 나아가, 선량분석은 피폭 시나리오에 대한 대체 방안 수립, 필요한 제염 및 방사선방어 프로세스 그리고 허용 방사능 검토의 정보를 제공하는데 사용 될 수 있을 것이다.

• Journal of Information Technology Applications and Management
• /
• 제26권6호
• /
• pp.103-117
• /
• 2019

Demand for high power motors is rapidly increasing as the 4th industry and convergence technology has recently emerged. In order to produce high-strength permanent magnets, the magnets used for magnetization have been increased from DC 300V in the 1970s to DC 2.5kV in the 2010s, Up to DC 10kV in the 2030s, It is expected that higher voltage will be used to magnetize. However, in the case of a magnetizer using an existing electric signal control device, it is necessary to use a control device with a high-voltage insulation function in case a high voltage used for magnetization is leaked to the control device. If a short circuit accident occurs, the controller must be shut down and serious problems such as excessive repair costs arise. In this study, a control system adopting optical communication method instead of electric signal control method is proposed to prevent leakage currents in high-voltage magnetizer. We design a transmitter(Tx) and a receiver(Rx) device for the optical communication control device and implemented a prototype connecting the optical cable. In order to demonstrate the utility of high-voltage magnetizer using the optical communication control device, we analyzed the initial cost and the yearly cost for the years to analyze the net present value. As a result, In the case of the low-voltage magnetizer, the electric signal control method cost less, As the operating voltage of the magnetizer becomes higher. It is confirmed that it takes less cost when the optical communication control device is used.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.305-309
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. The Commissioning of the FTL is to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제29권9호
• /
• pp.645-653
• /
• 2002

발전기 기동정지 계획은 하나의 전력시스템을 형성하는 다수의 발전기에 대해서 주어진 여러 제약을 따르는 일간 또는 주간의 기동 및 정지시간을 결정하는 작업으로 다양한 제약과 방대한 탐색공간으로 인해 최적의 경제적 계획 수립이 매우 어려운 대규모 최적화 문제이다. 타부 탐색은 보통의 지역적 탐색법에 비해 국지적 최적해에 빠질 위험이 적고 다른 전역적 탐색기법에 비해 대상문제에 관한 지식을 충분히 활용하기에 유리하여 많은 최적화 문제에 사용되고 있다. 그러나 규모가 방대하면서 많은 제약조건이 존재하는 대규모 최적화 문제들은 타부 탐색으로도 빠른 시간내에 최적의 해를 찾아내기 힘들다. 본 논문은 대규모 최적화 문제의 하나인 발전기 기동정지 계획 문제를 타부 탐색의 병렬화를 통해 해결함으로써 탐색 소요시간의 단축과 함께 해의 질 또한 향상시킬 수 있음을 보여준다.