• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1142-1147
• /
• 2016

Recently, IoT(Internet of Things) has been extensively researching to provide intelligent services by fusing ICT. Especially with the advent of Germany's Industry 4.0, it is emphasized the importance of the industrial IoT to maximize the production capacity. Accordingly, a lot of efforts to spread the smart factory base of industrial IoT have continued domestically as well as abroad. But the current smart factory systems have controlled equipment using the data declared in the embedded systems. Therefore, it is difficult to control environment that lots of equipment is installed. In this paper, we proposed equipment control system based on data base access method for industrial IoT. This method controls the equipment using data base from parameter of equipment. Through experiments that the system apply to mold shot system with a number of variables, it is shown that the proposed method can efficiently control a number of devices.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.2
• /
• pp.164-171
• /
• 2013

Since plenty of spacecrafts were launched in space after 1957, the number of space debris has been increased. According to the JSpOC, the number of space debris which diameter is bigger than 10 cm are more than 22,000. Recently there were two critical events. Which one is that China shot down their satellite using missile and the other is that two satellite, Iridium and Cosmos 2251, collied. Space environment in low-earth orbit has been severe. JSpOC analyzes the collision risk between 15,000 space debris and all operation satellites and then they send CSM to the satellite operator to utilize its orbital information if collision risk might be occurred. This paper analyzes the CSM orbit data by comparing with KOMPSAT-2 precise orbit data and shows conjunction assessment results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.43-50
• /
• 2012

The effects of parameters related to the finite element simulation of the laser shock peening(LSP) process on the residual stresses of Inconel alloy 600 steel are discussed. In particular, we focus on the maximum pressure, pressure pulse duration, laser spot size, and number of shots. It is found that certain ranges of the maximum pressure and pulse duration can produce the maximum compressive residual stresses near the surface, and thus proper choices of these parameters are important. The residual stresses are not affected by the laser spot size, provided it is larger than a certain size. The magnitudes of the compressive residual stresses and the plastically affected depths are found to increase with an increasing number of shots, but this effect is less pronounced for more shots.

• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.55-63
• /
• 2011

Space debris is the collection of objects in orbit around Earth that were created by humans but no longer serve any useful purpose. Since plenty of spacecrafts were launched in space after 1957, the number of space debris has been increased. According to USSTRATCOM, the number of space debris which are bigger than 10cm is more than 15,000. Recently two critical events were occurred. Which one was that China shot down their satellite using missile and the other was that t o satellite, Iridium 33 and Cosmos 2251, collided in space. Space debris environment in which KOMPSAT-2 is operating has been severe. This paper presents the status of space debris and international activity, and the comparison of conjunction assessment process between Korea Aerospace Research Institute and abroad satellite operation center.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.481-487
• /
• 2015

In the product development stage, it is very important to ensure demanded quality level before moving to the full-scale manufacturing. For example, in developing guided weapons, live-fire tests are required to verify the final performance of the weapons which are very expensive. The quality evaluation of the guided weapons needs destructive testing, which makes it necessary to test as small number of samples as possible. This paper presents sampling inspection plans and calculating system for finite population guided weapons, which can meet the demanded quality level and confidence level with the minimum number of performance tests. The result of this paper can be useful for any kind of costly destructive testing.

• Journal of Life Science
• /
• v.19 no.5
• /
• pp.684-687
• /
• 2009

Xanthomonas arboricola pv. pruni, the causal agent of bacterial shot holes in stone fruits, was known to have a low population diversity. To investigate the genetic characteristics of X. arboricola pv. pruni isolated in Korea, three strains which have identical 16S rDNA sequences - including type strain (LMG852), Japanese isolate (MAFF301420) and Korean isolate (XWD1) - were analysed based on the nucleotide sequences of three DNA regions and RAPD pattern. No sequence diversity among the three strains was found within the ITS, glnA and atpD gene sequences. However, five of 756 nucleotides of the atpD gene determined (accession number FJ429319) were different from those of the French strain available from the Genbank database. RAPD analyses performed with 40 different arbitrary primers revealed that two strains isolated from Korea and Japan showed similarity in their band patterns distinguished by type strain. These results suggest that Korean and Japanese strains are very close and belong to a population with a low genetic diversity, and might have a different origin from strains found in West Europe.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.11-19
• /
• 2016

Two representative residual static methods of traveltime decomposition and stack-power maximization are discussed in terms of application to land seismic data. For the model data with synthetic shot/receiver statics (time shift) applied and random noises added, continuities of reflection event are much improved by stack-power maximization method, resulting the derived time-shifts approximately equal to the synthetic statics. Optimal parameters (maximum allowable shift, correlation window, iteration number) for residual statics are effectively chosen with diagnostic displays of CSP (common shot point) stack and CRP (common receiver point) stack as well as CMP gather. In addition to removal of long-wavelength time shift by refraction statics, prior to residual statics, processing steps of f-k filter, predictive deconvolution and time variant spectral whitening are employed to attenuate noises and thereby to minimize the error during the correlation process. The reflectors including horizontal layer of reservoir are more clearly shown in the variable-density section through repicking the velocities after residual statics and inverse NMO correction.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.421-430
• /
• 1997

In this study, the static and the fatigue tests were performed with high tension bolted joints, of which the surfaces were spread with inorganic zinc-primer after shot-blast, and milling surface, and steel-natural surface, difference of friction surface condition were examined by comparing the esults of tests. From the result of synthetical investigation of this study. it is proper that using the torque management method in order to introduce design axial force to blots, and the provision of specifications that initial axial forces must be 110% of design axial forces is proper. Decreasing ratio of axial forces to initial force is proportional to common lorgarithms of time progress, it converge constant value after 20 hours, and decreasing ratio is little related to the roughness of friction surface. Sliding coefficient of milling, spreading inorganic zinc-primer, just producting is great in order and sliding forces are dependent on the applied axial forces, but if the applied axial forces are great, sliding coefficient become small by a loss of roughness. So it is confirmed that relation between the applied axial forces and the sliding forces are not proportional linearly. From the result of estimation on fatigue strength, all specimens satisfy the specifications with B-grade and milling surface is lower than the others about 14% in fatigue strength because in milling surface lose the function of friction-types joints at lower number of cycles. From the result of eximination for the distribution area of compressive force, friction area near to inside bolt is wider in the direction of stress than near to outside. It is guessed that this situation occurs because outside bolts firstly change from the friction connection to the bearing connection.

• The Journal of Korean Society of Virology
• /
• v.27 no.1
• /
• pp.39-47
• /
• 1997

A large number of viruses belonging to Genus Hantavirus in Family Bunyaviridae are etiologic agents for hemorrhagic fever with renal syndrome (HFRS), or hantavirus pulmonary syndrome (HPS). Hantaan (HTN), Seoul (SED), Belgrade (BEL), Puumala (PUU) serotype viruses are well known causative agents for HFRS in Eurasian continent. Among those viruses Hantaan and Seoul serotypes are well known to cause HFRS in Korea, but there are some sporadic incidence by other than Hantaan or Seoul viruses. Recently we have developed the combined Hantaan-Puumala virus vaccine to prevent world-wide occuring HFRS. This combined vaccine is formalin inactivated, suckling mouse and suckling hamster brain extracts for Hantaan and Puumala viruses, respectively. Protein contents of this purified candidate vaccine is $27\;{\mu}g/ml$, which contains 1,024 ELISA antigen units to each virus, but content of myelin basic protein which is causing experimental allergic encephalomyelitis is less than 0.1 ng/ml. Thirty hamsters were given twice at one month interval intra-muscularly and bled on 30 days after each vaccination from retro-orbital sinus vein. Antibody titers were tested against 5 major serotype viruses, Hantaan, Seoul, Belgrade, Puumala and Sin Nombre viruses by IFA and PRNT. The mean IF antibody titers on 30 days after primary shot were 78.4, 68.8, 68.8, 37.9, and 15.6; mean neutralizing antibody titers were 65.4, 12, 6.1, 65.6 and 0.5 against Hantaan, Seoul, Belgrade, Puumala and Sin Nombre viruses, respectively. The mean IF antibody titers on 30 days after booster shot were 686.9, 567.5, 550.4, 516.3, and 430.9; and neutralizing antibody titers were 710.8, 41.9, 24.3, 409.9, and 1.6 against Hantaan, Seoul, Belgrade, Puumala and Sin Nombre viruses, respectively.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.247-251
• /
• 2012

To suggest the basic data for exporting enlargement of sweet pepper (Capsicim annuum L.), this study compared plant growth and fruit setting characteristics among 8 cultivars of red line. At 23 weeks after planting, plant height was long in 'Debla', 'Cupra', 'Thialf', 'Viper' and 'Spider', and was shot in 'Scirocco', 'Ferrari', 'Special'. 'Debla' had a few nodes number and long internode length. For 23 weeks after planting, weekly increment of plant hight and number of developed node were many in 'Debla' and 'Cupra', were few in 'Special' and 'Ferrari'. Average fruits of over 200 g was harvested in 'Viper', 'Spider' and 'Debla', average fruits of range of 180~200 g was harvested in 'Special' and 'Thialf', and average fruits of range of 160~180 g was harvested in 'Scirocco' and 'Cupra'. Cultivars harvested heavy fruits except in 'Debla' was high in percentage of irregular fruit size. Number of fruit setting on plant was many in 'Cupra' and 'Ferarri', ripening first was many in 'Ferarri', 'Scirocco' and 'Viper'.