• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.221-224
• /
• 2009

In this paper, we deal with the development of an optimal design program for a dual-band of 0.92 GHz and 2.45 GHz with shorting pin and slot by using evolution strategy. the optimal shorting pin, coaxial feed and H-shaped patch are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the dual-band antenna yielded by the optimal design program are 0.92 GHz and 2.45 GHz that show a good agreement to the design target values.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.811-818
• /
• 2002

본 논문에서는 안테나의 고조파 방사를 억압하여 고조파 억압 여파기의 필요성을 제거한 단락핀-슬롯 적재 안테나를 설계, 제작하였다. 인셋 급전 방식의 구형 패치 안테나에 단락핀과 슬롯을 적재하여 고조파 억압 특성을 얻어내었다. 구형 패치 안테나의 공동 모델을 이용하여 단락핀과 슬롯의 역할을 해석하였으며 단락핀과 슬롯에 의한 구형 패치 안테나의 특성 변화에 대해 기술하였다. 제안된 안테나는 중심 주파수 5.8 GHz에서 7 dBi의 이득을 나타내었으며 2차, 3차 고조파에서 일반 구형 패치 안테나와 비교하여 안테나의 이득이 -3.3 dB, -14.3 dB의 억압 특성을 나타냄을 확인하였다.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1835-1840
• /
• 2008

In this paper, a dual band H-shaped microstrip patch antenna is designed for RFID application. Using shorting pin and H shaped for dual resonators and control dual frequency independently. The antenna shows a good performance at the frequency, 912MHz and 2.45GHz for the radiation characteristic and input impedance matching, as well. The reflection is lower than -10dB and a good directivity higher than 3dB is achieved for both frequency.

• 한국전자파학회논문지
• /
• 제15권12호
• /
• pp.1168-1177
• /
• 2004

본 논문에서는 전자기적 결합 급전 소형 광대역 디스크-로디드 모노폴 안테나의 사각 디스크에 연결된 단락핀의 수와 배열 간격 등의 변화에 따른 안테나 특성을 연구하고 각각의 단락핀 수에 따른 최적화된 안테나를 설계하였다. 전자기적 결합 급전 소형 모노폴 안테나는 각각 모노폴로 동작하는 단락된 사각 디스크의 공진과 사각 스파이럴 스트립 급전 선로의 공진이 전자기적으로 결합하여 넓은 대역폭을 가지게 된다. 안테나에서 사각 디스크의 단락핀의 수와 배열 간격은 디스크의 캐패시턴스에 영향을 주게 되어 공진주파수는 1.90 GHz에서 2.556 GHz까지 이동하며 이에 따라서 안테나의 전기적 크기와 대역폭에도 영향을 미치게 된다. 사각 디스크에 단락핀이 3개 연결되었을 때 안테나는 2.556 GHz의 중심 주파수에서 전기적 부피가 $0.094\lambda_0{\times}0.094\lambda_0{\times}0.094\lambda_0$ 이하로써 소형의 크기를 가지며 $26.8\%$의 넓은 대역폭을 가진다.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.215-220
• /
• 2018

This study presents a dual-band polarization-reconfigurable antenna that comprises a large square patch with a pair of corner-cut edges and two small square patches with a shorting via. Two PIN diodes are located between the large square patch and two small square patches. Depending on the bias state applied to the two PIN diodes, each small patch may be disconnected or connected to the large square patch. As a result, the proposed antenna can provide polarization reconfigurability between two orthogonal linear polarizations. Further, the proposed antenna operates at 2.51 GHz and 2.71 GHz. From the measured results, the proposed antenna shows a 10 dB bandwidth of 2.39% (2.49-2.55 GHz) and 2.58% (2.68-2.75 GHz). In this work, the frequency ratio can be easily controlled by changing the size of the small patch.

• ETRI Journal
• /
• 제31권5호
• /
• pp.616-618
• /
• 2009

In this letter, a novel hybrid planar inverted-F antenna (PIFA) with a T-shaped slot on the ground plane is proposed. The loop structure formed by the feed line and shorting pin can be operated as a series and shunt inductance for the PIFA and the T-shaped slot antenna, respectively. The PIFA operates at a frequency of 1.75 GHz, while the T-shaped slot on the ground plane operates at 2.4 GHz by the same voltage feeding source. The height of the PIFA is 6.5 mm, and the size of an upper patch is designed to be 30 mm${\times}$16 mm. The measured relative impedance bandwidth of the PIFA and the T-shaped slot are about 12% and 21%, respectively. In addition, good antenna performance was achieved.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.112-115
• /
• 2016

This paper demonstrates a scalp-implantable miniaturized antenna at the medical implant communication service (MICS) (402-405MHz) band. The antenna size is only $27.63mm^3$($8.5mm{\times}6.5mm{\times}0.5mm$), which is the smallest antenna for the MICS band. Miniaturization is achieved by using a symmetrical serpentine shaped radiating patch and placing open-end slots in the ground plane. In addition, co-axial feeding is used for excitation with a shorting pin connected between the radiator and ground. The antenna was simulated in a homogeneous skin model and in the human scalp. An experimental prototype of the proposed antenna was fabricated and measured in a skin-mimicking gel. Good agreement was obtained between the measurement and simulation results, showing a broad bandwidth of 49 MHz (from 395 to 444 MHz) for |S11| less than -10 dB and a maximum gain of -42.87 dBi. This gain is higher than the previous MICS antenna with respect to antenna size.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.29-34
• /
• 2016

This paper proposes a reconfigurable microstrip diplexer, also known as a switchplexer, for use with single-switch operation of frequency band and output path. The proposed switchplexer is composed of a rectangular ring resonator and a switch on a shorting pin, which is inserted between the ring resonator and the ground plane. The rotated main current distributions occurring at different switch statuses provide the diplexer's different operating bands and different output ports. The performance of the simply designed switchplexer is successfully demonstrated via simulation and measurement.

• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.54-63
• /
• 2023

In this paper, a VHF band conformal antenna for UAV mounting was developed. The proposed antenna was designed as an shape-adaptive structure by minimizing the antenna height to be advantageous in RCS reduction performance. As for the antenna radiator, the outer radiator was arranged around the inner radiator to apply the CRLH zeroth-order resonance structure. With this structure, the height of the antenna was minimized, and it was reduced by about 70 % compared to the existing blade antenna. In addition, for impedance matching, the intermediate frequency bandwidth of the VHF band was improved through the sleeve pin of the inner radiator, and the low frequency bandwidth of the VHF band was improved by applying an EMI shielding gasket to the shorting pin of the outer radiator. The proposed antenna was manufactured and measured to verify the performance of the device and the performance after UAV mounting. As a result, the standard was satisfied for the operating frequency.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.475-476
• /
• 2015

본 논문에서는 지상파 디지털방송 수신용 광대역 평면 야기 안테나의 새로운 급전방법에 대해 연구하였다. 다이폴을 급전하는 평형선로인 코플래너 스트립과 불평형 마이크로스트립 선로간의 밸런은 코플래너 스트립 중앙에 삽입된 직사각형 패치이다. 패치의 한 쪽 끝은 코플래너 스트립에 단락핀으로 연결되어 있다. 안테나의 여러 가지 파라미터들과 밸런이 안테나 특성에 미치는 영향을 관찰하였다. 제안된 구조의 안테나를 지상파 DTV 방송 주파수대역인 470-806 MHz 대역에서 동작하도록 설계하였다.