• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.11-17
• /
• 2004

본 논문에서는 소형 광대역 동전형 안테나를 설계한다. 안테나는 동축선로로 급전되고, 두개의 다른 주파수에서 공진하는 두개의 원통형 슬롯을 가진 두개의 스택 원형 패치로 구성된다. 마이크로스트립 패치 안테나의 대역폭을 증가시키기 위해서, 스택 타입을 사용한다. 또한, 마이크로스트립 패치 안테나의 크기를 줄이고 이중 공진을 얻기 위해서, 두개의 단락벽을 사용한다. 실험결과 안테나 대역폭은 5.8㎓를 중심으로 약 26%이고 HFSS 7.0의 계산치와 거의 일치한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.60-62
• /
• 1988

In this study, the characteristic of charging current which flows into the polymer by applying the corona discharge carriers on the polymer surface was measured, so as to investigate the phenomenon of charge injection and movement if injected charge on polymer. Also. the characteristics of discharge current which flows by shorting both sides of corona charged polymers were measured. Experimental results are as follows; The amount of charges injected by corona discharge vary according to the state of surface and the type of carriers, and then the charging current varies according to the properties of injected carriers.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.29-34
• /
• 2016

This paper proposes a reconfigurable microstrip diplexer, also known as a switchplexer, for use with single-switch operation of frequency band and output path. The proposed switchplexer is composed of a rectangular ring resonator and a switch on a shorting pin, which is inserted between the ring resonator and the ground plane. The rotated main current distributions occurring at different switch statuses provide the diplexer's different operating bands and different output ports. The performance of the simply designed switchplexer is successfully demonstrated via simulation and measurement.

• ETRI Journal
• /
• 제28권2호
• /
• pp.216-218
• /
• 2006

This letter presents the design for a low-profile planar inverted-F antenna (PIFA) that can be stuck to metallic objects to create a passive radio frequency identification (RFID) tag in the UHF band. The designed PIFA, which uses a dielectric substrate for the antenna, consists of a U-slot patch for size reduction, several shorting pins, and a coplanar waveguide feeding structure to easily integrate with an RFID chip. The impedance bandwidth and maximum gain of the tag antenna are about 0.3% at 914 MHz for a voltage standing wave ratio (VSWR) of less than 2 and 3.6 dBi, respectively. The maximum read range is about 4.5 m as long as the tag antenna is on a metallic object.

• 대한안전경영과학회지
• /
• 제3권1호
• /
• pp.35-44
• /
• 2001

Today's environment of enterprise is changing. They have to face customers' demands with the right product, the right service and supply them at the right time. And aIso cut down logistics and inventory cost and bring up the Profit as much as they can. This means the change of putting enterprise first in importance to putting customer first in importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management In this study, we use Goldratt's drum-buffer-rope scheduling in between manufacturer and supplier. And when shortage of inventory occur, search for the supply chain's CCR. Pressing CCR for more production, and supply Inventory from logistic center to guide for inventory buffing. using logistic warehouse between manufacturer and supplier, can execute function of buffer.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.115-120
• /
• 2002

Today's environment of enterprise is changing. They have to face customer' demands with the right product, the right service and supply them at the right time. And also cut down logistics and inventory cost and bring up the profit as much as they can. This means the change of putting enterprise first in importance to putting customer first importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management. In this paper, It consolidates the necessity on a LTV(Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV(Life Time Value) rule that can improve the customer value.

• ETRI Journal
• /
• 제30권4호
• /
• pp.597-599
• /
• 2008

This letter presents the design of a small and low-profile RFID tag antenna in the UHF band that can be mounted on metallic objects. The designed tag antenna, which uses a ceramic material as a substrate, consists of a radiating patch and a microstrip line with two shorting pins for a proximity-coupled feeding structure. Using this structure, impedance matching can be simply obtained between the antenna and tag chip without a matching network. The fractional impedance bandwidth for $S_{11}$ <3 dB and radiation efficiency are about 1.4% and 56% at 911 MHz, respectively. The read range is approximately from 5 m to 6 m when the tag antenna is mounted on a metallic surface.

• ETRI Journal
• /
• 제16권1호
• /
• pp.59-72
• /
• 1994

In this paper, a new N-way hybrid power combiner for improving the graceful degradation performance has been proposed. The proposed combiner has been configured with two dummy transmission lines per each section, where each dummy transmission line has a different characteristic impedance, of the standard combiner. Under this proposed configuration, a detailed theoretical analysis has been performed to show the general function of a power combiner. When any M amplifiers among N identical amplifiers are suffering the failure mode in a power combining circuit or system, the graceful degradation performance has been improved due to the separation of a transmission line and an internal resistor in every failed section from the proposed combiner by simultaneously operating two shorting devices. Simulation results for all the items which can be measured from all the items which can be measured from the proposed combiner with an eight-way configuration have been presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.157-158
• /
• 2007

In this paper, an internal wideband DVB-H antenna using parasitic patch is proposed. The antenna consists of rectangular patch with system ground and shorting plate. The -10 dB impedance bandwidth of proposed antenna is about 530 MHz ($470{\sim}1000\;MHz$). Radiation patterns are nearly omni-directional for operating frequency. It is suitable for DVB-H application.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.131-140
• /
• 2002

Today's environment of enterprise is changing, They have to face customer' demands with the right product, the right service and supply them at the right time. And also cut down logistics and inventory cost and bring up the profit as much as they can. This means the change of putting enterprise first in importance to putting customer first importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management. In this paper, It consolidates the necessity on a LTV(Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV(Life Time Value) rule that can improve the customer value. We solved this problems using AHP(Analytic Hierarchy Process) for consistency at relationship matrix, AHP(Analytic Hierarchy Process) is based on Saaty's consistency rate. If consistency rate is under 0.1 point, preference rate's weights are acceptable. This study develop a program for AHP weights and support Satty's consistency rate.