• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.467-482
• /
• 2022

The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.s01
• /
• pp.86-97
• /
• 1988

Sesame(Sesamum indicum L.) is probably the most ancient oilseed crop known in the world. The seed of sesame is used in a variety of ways as food. The whole seed may be eaten raw, either roasted or parched, or fed to birds and stock. Sesame oil is used as a salad or cooking oil, in shortening, margarine and in the manufacture of soap. Minor uses are as a fixative in the perfume industry and formerly as a carrier for fatsoluble substances in pharmaceuticals such as penicillin. One of the minor constituents of sesame oil, sesamin, is used for its synergistic effect in pyrethrin insecticides, in addition of a small quantity of this substance markedly increases the effectiveness of fly sprays. The meal remaining after oil extraction can be used as and animal feed-stuff or as manure. In general sesame meal is considered to be equal to cottonseed or soybean meal as a protein supplement for livestock and poultry. It is especially high in certain amino-acids such as methionine, which is low in soybean meal, and thus can be combined with it or similar meal to form a more balanced ration. An attempt to summarize the literature review on quality improvement of sesame was made to discuss the accomplishments of the past and perspectives in the future. The reviews on quality improvement of sesame were mainly discussed in connection with the cultural practices and genetic informations in current status. The emphasis focussed on environmental variation of quality in cultural practices, such as harvest time, variety by location, climatic condition, fertilizer application, and growth regulator treatment. On the genetic variation of quality, it was discussed on variety background, mutation breeding, correlations, and inheritance of quality related characteristics. It also was discussed on relationship between quality and plant traits, storage condition or period, and seed coat color. Moreover, current research status were reviewed on some minor elements such as sesamin, oxalic acid, and trypsin inhibitor. As a results of the review, the lack of an effort to quality improvement in each utilization area was indicated as a problem area. More active efforts for the improvement of quality were also insufficient to incorporate the available genes for quality in breeding method or collection and analysis of breeding materials. Therefore, researches in the future would be recommended to emphasize on these problem areas.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.186-192
• /
• 2022

This study investigated 110 contractual industries to identify the effects of curriculum development and educational environment improvement through Ulsan College LINC+ Program on job education and training. As a result of the study, core competency and job competency were 5.73 points each in field practice and educational environment, and job performance was significant with OJT 5.58 points and 5.74 points for educational environment(p<0.05). The relationship between suitability of the curriculum, educational environment, and recruitment performance was significant with 5.73 points for OJT, 5.74 points for field training during the education and training period, and 5.79 points for educational environment, and job reeducation/training expense was significant with 5.73 points for OJT and 5.79 points for educational environment(p<0.05). Also, students who completed the LINC+business curriculum shortened their job period by 1 to 6 months in 86.3% of the respondents, and responded that the education expense for new employees was reduced. Therefore, it was identified that the LINC+ Program of Ulsan College has the effect of shortening the job adaptation period and reducing education expenses for new employees by operating the curriculum reflecting the needs of the industry and improving the same educational environment as the industrial field.

• The Korean Journal of Franchise Management
• /
• v.3 no.2
• /
• pp.1-19
• /
• 2012

This study intends to suggest the cooperative, win-win collaboration, as methods for settling disputes with the existing self-employed people over back-street business areas and disputes and conflicts between a franchiser and franchisees. In addition, it intends to analyze the Dunkin' Donuts purchasing cooperative in the US, where the franchising industry has been well developed; and to find the implications of cooperation strategies between Dunkin' Donuts and its franchisees that may be helpful for the South Korea's franchising industry. This study tries to discover a new model of the Korean-style franchise cooperative out of the basic principles and practice guidelines of cooperatives ranging from an early American franchise cooperative in 1955 to ARCOP, KFC, and Dunkin' Doughnuts in the late 1970s. Further, it looks into successful programs of a purchasing cooperative at Dunkin' Donuts such as TDP (Total Distribution Program), SFP (Shortening Futures Program) and DCP (Distribution Commitment Program). The case of the US Dunkin' Donuts, which operates the purchasing cooperative, suggests the following for the improvement of franchisees' profitability. First, relations of cooperation rather than of power are necessary between a franchiser and franchisees. Second, mutual solidarity of franchisees is necessary. Third, problems proper to the Korean franchise system should be improved. Fourth, an entrepreneurial spirit of going together rather than going fast is required. Fifth, complete satisfaction management is required. Considering different system environments between the two countries such as quantitative expansion within a short franchising history of 30 years or so and franchise profit models, there is a limit to generalizing down to a successful model of the win-win partnership cooperative. It is hoped that the sustainable management of the domestic franchising industry will be promoted in the future through the in-depth analysis of successful cooperatives.

• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.62-72
• /
• 2023

The aging of plant structures due to industrialization in the 1970s has increased the demand for blast demolition. While blasting can reduce exposure to environmental pollution by shortening the demolition period, improper blasting design and construction plans pose significant safety risks. Thus, it is vital to consider optimal blasting demolition conditions and other factors through collapse behavior simulation. This study utilizes a 3-D combined finite-discrete element method (FDEM) code-based 3-D DFPA to simulate the collapse of a chimney structure in a thermal power plant in Seocheon, South Korea. The collapse behavior from the numerical simulation is compared to the actual structure collapse, and the numerical simulation result presents good agreement with the actual building demolition. Additionally, various numerical simulations have been conducted on the chimney models to analyze the impact of the duct size in the pre-weakening area. The no-duct, duct, and double-area duct models were compared in terms of crack pattern and history of Z-axis displacement. The findings show that the elapse-time for demolition decreases as the area of the duct increases, causing collapse to occur quickly by increasing the load-bearing area.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.4
• /
• pp.163-171
• /
• 2024

SCR420H steel is a low-carbon chromium alloy steel designed for carburizing heat treatment. Recently, research is being conducted on high-temperature carburization heat treatment to reduce costs and CO₂ emissions by shortening the carburization time to meet the international carbon neutral policy. However, this high-temperature carburization heat treatment coarsens the steel grains and causes a decrease in mechanical properties. In this study, a large amount of Ti was added to increase the grain refinement effect in the high-temperature carburizing process. We investigated the microstructure and precipitates of SCR420H steel without Ti (Al steel) and with Ti (AlTi steel). Thermodynamic calculations showed that the AlN and (Ti,Nb)(C,N) precipitated in Al steel, while (Ti,Nb)(C,N) and Ti₄C₂S₂ precipitated in AlTi steel. Addition of Ti increases the fraction of bainite after reheating process. Transmission electron microscopy analysis shows that small amounts of AlN and (Ti,Nb)(C,N) precipitates are formed in the Al steel. The addition of Ti increases the density of (Ti,Nb)(C,N) precipitates and induces the formation of Ti₄C₂S₂ precipitates, increasing the grain coarsening temperature (GCT) under all heat treatment conditions. Higher reheating temperatures also resulted in higher GCT values due to increased precipitation.

• Journal of Home Health Care Nursing
• /
• v.6
• /
• pp.5-18
• /
• 1999

This study was attempt to encourage for developing on rehabilitation delivery system and programs as a substitute service instead of hospitalization for accident patients at work, such as hospital based home health care nursing service. It needs vary substitutes service of hospitalization to curtail the length of stay for inpatients who were hospitalized with workers compensation insurance. It focused on developing an estimation of early discharge day of accident inpatients based on a detail statement of treatment for 115 inpatients who were hospitalized at General Hospital in 1997. This study has four specific purpose as follows. First, to find out the status of health service utilization. Second, to estimate the early discharge days and income increasing effect based on the early discharge for those patients. Third, to identify the factors to affect total medical expenditure and the length of stay for those inpatients. Forth, to figure out the need of utilizing home health care nursing service for accident patients. In order to analyze of the length of stay and medical expenditure for inpatients who were hospitalized due to the accident, the authors conducted with micro-analysis and macroanalysis from medical records and medical expenditure records. Micro-analysis was done by nominal group discussion of 4 expertise with the critical criteria. such as a decrease in the amount of treatment after surgery, treatments, tests, drugs and changes in the tests consistency, drug methods, vital signs, start of ROM exercise, doctor's order, patient's outside visiting ability, stable conditions. In addition to identify affected variables for medical expenditure. the length of stay and income effect due to early discharge day, the data was analyzed with multiple regression analysis and linear regression analysis model by SPSS-PC for windows and Excell program. Results of this study as follows. First, the mean length of stay was 37.1 days, whereas the mean length of stay due to early discharge was 28.2 days at the hospital. The estimation of early discharge days were shown that depends on the length of stay. The longer length of stay, the longer length of early discharge days, such as under 7 days length of stay patients was to estimated the mean length of stay was 4.9 days and early discharge days was 4.6. whereas the mean length of stay was 122.6 days and early discharge days was 92.0 respectively. The mean medical expenditure per day were found to be 133.409 Won. whereas the mean medical expenditure per day was shown negative linear trends according to the length of stay at the hospital. The estimation results of the income effect due to 11 early discharge days per bed was around 2,150,000 won. However, it means not the real benefits from early discharge, but the income increasing amount without considering medical prime cost in general hospital. Therefore, it needs further analysis on the cost containments and benefits under the considering as well turn over rates per bed as the medical prime costs. The length of stay was most significant and the sign was positive to the total medical expenditure, as expected. Surgery and patient's residential area also an important variable in explaining medical expenditure. The level of complications was most significant variable in explaining the length of stay. The level of the needs on horne health care nursing service which can be used for early discharge accident patients were shown very high. The needs distribution varied from 65.5% of patients and 88.9% of caregivers, to 96.4% of doctors, and 99.1% of nurses. In addition horne health nurse responded that they can be managed the accident inpatients from early discharge. From these research findings. the following suggestions has been drawn it needs to develop strategies on rehabilitation delivery system in order to focused on consumer's side which is planned for 21 century health policy in Korea. Vary intermediate facilities and horne health care would have been developed in the community based for comprehensive rehabilitation services as a substitutes of hospitalization for shortening the length of stay of hospitalizations. In hospital based horne health care nursing service, it's available immediately to utilize for the patients who wanted rehabilitation services as a substitutes of hospitalization under the cooperations with workers compensation insurance company.

• Research in Community and Public Health Nursing
• /
• v.10 no.1
• /
• pp.70-79
• /
• 1999

This study attempts to encourage the development of a rehabilitation delivery system as a substitute service for hospitalization such as a community based intermediate facility or home health care. We need substitute services for hospitalization to curtail the length of stay for inpatients due to car accidents. It focused on developing an estimation for early discharge based on a detailed statement of treatment from medical records of 109 inpatients who were hospitalized at General Hospital in 1997. This study has three specific purposes: First, to find the mean length of stay and mean medical expenditure. Second, to estimate the mean of early discharge from the mean length of stay. Third, to analyize the income effect per bed from early discharge. In order to analyze the length of stay and medical expenditure of inpatients the author conducted a micro and macro-analysis with medical expenditure records. To estimate the early discharge we examined with a group of 4 experts decreases in the amount of treatment after surgery, in treatments, in tests, in drug methods. We also looked their vital signs, the start of ROM exercise, the time removel, a patient's visitations, and possible stable conditions. In addition to identifing the income effect due to an early discharge, the data was analyzed by an SPSS-PC for windows and Excell program with a regression analysis model. The research findings are as follows: First, the mean length of stay was 47.56 days, but the mean length of stay due to early discharge was 32.26 days. The estimation of early discharge days was shown to depend on the length of stay. The longer the length of stay, the longer the length before discharge. For example, if the patient stayed under 14 days the mean length of stay was 7.09 while an early discharge was 6.39, whereas if the mean length of stay was 155.73, the early discharge time was 107.43. The mean medical expenditure per day of car accident patients was found to be 169,085 Won, whereas the mean medical expenditure per day was shown to be in a negative linear form according to the length of stay. That is the mean expenditure for under 14 days of stay was 303,015 Won and the period of the hospitalization of 15 days to 29 days was 170,338 Won and those of 30 days to 59 days was 113,333 Won. The estimation of the income effect due to being discharged 16 days was around 2,350,000 Won with a regression analysis model. However, this does not show the real benefits from an early discharge, but only the income increasing amount without considering prime medical cost at a general hospital. Therefore, we need further analysis on cost containments and benefits incending turn over rates and medical prime costs. From these research findings, the following suggestions have been drawn, we need to develop strategies on a rehabilitation delivery system focused on consumers for the 21st century. Varions intermediate facilities and home health care should be developed in the community as a substitute for shortening the length of stay in hospitals. In home health care cases, patients who want rehabilitation services as a substitute for hospitalization in cooperation with private health insurance companies might be available immediately.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.289-301
• /
• 2010

A structural model of the SNF(spent nuclear fuel) disposal canister for the PWR(pressurized water reactor) for about 10,000 years long term deposition at a 500m deep granitic bedrock repository has been developed through various structural safety evaluations. The SNF disposal baskets of this canister model have the array type of which four square cross section baskets stand parallel to each other and symmetrically with respect to the center of the canister section. However whether this developed structural model of the SNF disposal canister is best is not determinable yet, because the SNF disposal canister with this parallel array has a limitation in shortening the diameter for the weight reduction due to the shortest distance between the outer corner of the square section and the outer shell. Therefore, the structural safety evaluation of the SNF disposal canister with the rotated basket array which is also symmetric with respect to the canister center planes is very necessary. Even though such a canister model has not been found as yet in the literature, the structural analysis of the canister with the rotated basket array for the PWR is required for the comparative study of the structural safety of canister models. Hence, the structural analysis of the canister with the rotated basket array in which each basket is rotated with a certain amount of degrees around the center of the basket itself and arrayed symmetrically with respect to the center planes is carried out in this paper. The structural analysis result shows that the SNF disposal canister with the rotated basket array in which the SNF disposal basket is rotated as 30~35 degrees around the center of the basket itself is structurally more stable than the previously developed SNF disposal canister with the parallel basket array.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.1-15
• /
• 2015

Based on the analysis and interpretation of the headwords and poetic words of a group of eleven collecting sceneries of Jeonju, the origin and transformations of the Jeonju-Palkyung(Eight sceneries of Jeonju) investigated by a time-series analysis are as follows. As there is no collection of landscape with a formal structure similar to that of the current Jeonju-Palkyung, prior to the Palkyung by Chujae(秋齋) Cho Soo-Sam(趙秀三, 1762~1849), there is no significant problem in assuming the eight poems in Chujaejib(秋齋集) are the origins of the Jeonju-Palkyung, and it is estimated to have been produced in 1829. In the late-19th century poem 'Wansanseunggyeong(完山勝景)', 'the Palkyung in Yeollyeo Chunhyang Sujeolga', and 'the Palkyung delivered by poet Shin Seokjeong in the Japanese colonial era', only the 'Dongpogwibeom(東浦歸帆)' changed from Dongjipo to Dongchon of Bongdong as for 'Landscape Setting There($L_{ST}$)' according to changes in district administration; despite this change, the fact that they are not too different from the Palkyung of Cho Soo-Sam, also supports this. Moreover, according to the headword concordance analysis, it is proven that the Jeonju-Palkyung was established in the late-19th century and continued to be the region's representative sceneries even during the Japanese colonial era, and later 'Namcheonpyomo(南川漂母)' and 'Gonjimangwol(坤止望月)' were added to expand to the Jeonju-Sipkyung(ten sceneries of Jeonju). But when we see there are famous spots that are the origins of the Jeonju-Sipkyung, including Gyeonggijeon, Geonjisan, Jogyeongdan, Omokdae, and Girinbong, Deokjinyeon, and Mangyeongdae, all of which have great representational significance as the capital of Jeolla Provincial Office as well as of the place of origin for Joseon Dynasty in the grouping of sceneries during the early Joseon Dynasty, including "Paehyangsipyeong (沛鄕十詠)", "Gyeondosipyeong (甄都十詠)", and "Binilheonsipyeong(賓日軒十詠)", the beginnings of the semantic Jeonju-Palkyung should be considered up to the first half of Joseon Dynasty. During this period, not only the fine sceneries with high retrospective merit as the capital of Hubaekje, like Gyeonhwondo(甄萱都), but also the sceneries like Mangyeongdae that reminds people of Jeong Mongju(鄭夢周) and Yi Seonggye(李成桂) in the late period of Goryeo appeared, elevating the status of Jeonju as the capital of Hubaekje and shortening the historical gaps as the place of origin of the Joseon Dynasty. The Jeonju-Palkyung is an organic item that carries the history of the Joseon Dynasty after Hubaekje and has gone through many cycles of disappearing and reappearing, but it has continued to change and transform as the region's representative sceneries. The Jeonju-Palkyung is a cultural genealogy that helps one understand the 'Jeonju Hanpunggyeong(韓風景: the sceneries of Korea in Jeonju)', and the efforts to preserve and pass it down to the next generation would be the responsibility of the people of Jeonju.