• 제목/요약/키워드: Short-time Work

검색결과 486건 처리시간 0.031초

교대근무 간호사의 효율적인 근무형태 개발을 위한 실태조사 (A Study for Developing the Effective Working Pattern for Nurses in Shift Work)

  • 박영우;신혜경;이현심;이혜영;김은현;박정숙;오경환;정미애;문경희
    • 임상간호연구
    • /
    • 제19권3호
    • /
    • pp.333-344
    • /
    • 2013
  • Purpose: This study was conducted to provide baseline data to develop work patterns for nurses that are suitable to Korean hospitals. Shift work patterns and nurses' preferences for working condition were examined. Methods: Questionnaires for nurse departments and nurses were mailed to 478 hospitals from June 1 to July 30, 2012. Nurse departments of 174 hospitals and 1,409 nurses responded to the questionnaire. Data were analyzed using SPSS statistical program. Results: Of the nurses, 89.4% were working three shifts. Of the hospitals, 17.3% had implemented fixed night work. Although 80% of nurses preferred fixed time work, only 24.9% of hospitals had fixed working hours. Of the nurses, 57% agreed with night work as fixed but potential night nurses accounted for only 17% of the respondents. Sixty-three percent of the nurses agreed on short time work during busy hours. There were preference differences according to age, marital status and clinical career. Conclusion: As many nurses reported a preference for various flexible working patterns rather than three shift work, there is a need for new decisions on hospital policy to ensure improved working conditions for nurses and enhanced job security. Legal requirements also need to be considered for various work patterns.

Short- and long-term analyses of composite beams with partial interaction stiffened by a longitudinal plate

  • Ranzi, Gianluca
    • Steel and Composite Structures
    • /
    • 제6권3호
    • /
    • pp.237-255
    • /
    • 2006
  • This paper presents a novel analytical formulation for the analysis of composite beams with partial shear interaction stiffened by a bolted longitudinal plate accounting for time effects, such as creep and shrinkage. The model is derived by means of the principle of virtual work using a displacement-based formulation. The particularity of this approach is that the partial interaction behaviour is assumed to exist between the top slab and the joist as well as between the joist and the bolted longitudinal stiffening plate, therefore leading to a three-layered structural representation. For this purpose, a novel finite element is derived and presented. Its accuracy is validated based on short-and long-term analyses for the particular cases of full shear interaction and partial shear interaction of two layers for which solutions in closed form are available in the literature. A parametric study is carried out considering different stiffening arrangements to investigate the influence on the short-and long-term behaviour of the composite beam of the shear connection stiffness between the concrete slab and the steel joist, the stiffness of the plate-to-beam connection, the properties of the longitudinal plate and the concrete properties. The values of the deflection obtained from the finite element simulations are compared against those calculated using the effective flexural rigidity in accordance with EC5 guidelines for the behaviour of elastic multi-layered beams with flexible connection and it is shown how the latter well predicts the structural response. The proposed numerical examples highlight the ease of use of the proposed approach in determining the effectiveness of different retrofitting solutions at service conditions.

Utilizing 3D Laser Scanning Technology for Remodeling Work of Building Inside

  • Lee, Jin-Duk;Han, Seung-Hee;Lee, Jae-Bin
    • International Journal of Contents
    • /
    • 제5권3호
    • /
    • pp.19-23
    • /
    • 2009
  • Laser scanning technology is a maturing measurement technology which is capable of obtaining 3D measurement data of objects with high-accuracy, high-resolution and in a short time. Laser scanners are used more and more as surveying instruments for various applications. This paper describes the procedure of 3D data acquirement using terrestrial LiDAR and section drawing extraction through a series of processing for remodeling the interior of a department building. Accurate drawings are needed for improvement construction of building interior. However if the design drawings of that time of construction work were lost or damaged or actual dimensions of drawings differ from those of design drawings, the interior should be resurveyed. In this study, the extraction process of interior plane figures were suggested through using laser scanning and related reverse engineering software

독일의 고용유연성 확대와 고용안정 (Increasing Employment Flexibility and Job Stabilization in Germany)

  • 이정언
    • 한국콘텐츠학회논문지
    • /
    • 제13권12호
    • /
    • pp.966-973
    • /
    • 2013
  • 본 연구는 독일의 고용 모델을 바탕으로 고용유연성의 확대가 고용안정성을 침해하지 않고 오히려 근로자와 기업 간 장기적 상생의 목표를 달성할 수 있는 배경과 관련 요인을 탐색하였다. 독일의 고용 및 실업정책의 핵심은 고용유연성의 확대에 있으며, 노사간의 양보와 합의가 주요한 역할을 하는 가운데 정부의 적절한 지원이 이를 성공으로 이끌었다. 특히 효율적인 고용시장정책을 통한 성과 창출과 유지의 이면에는 합리적인 사회적 대화가 자리를 잡고 있다. 독일의 앞선 경험은 우리나라 근로자와 기업의 고용유연성 제고를 위한 모범적인 사례가 될 수 있을 것이다. 제도 활용에 앞서 독일 노사관계의 바탕이 되는 노사간 존중의 관행을 이해하는 것이 필요하며 문화적 배경이 상이한 우리나라에 어떠한 방식으로 적용되는 것이 바람직할 것인지 다각적인 고찰이 선행되어야 한다.

직무스트레스와 작업능력의 상관관계에 관한 연구 (Relationship between Job Stress and Work Ability)

  • 이유정;장성록
    • 한국안전학회지
    • /
    • 제27권3호
    • /
    • pp.125-130
    • /
    • 2012
  • According to the Korea National Statistical Office data in 2010, the population over ages of 65 years would possess to 11.3% whole population of Korea in 2011 denoting Korea is already in the aging society. Old age is associated with inevitable time-dependent losses in physical capabilities. However the maintenance of physical capabilities is essential for continuing independence in old age. The work ability index(WAI) was constructed to reveal how well a worker is able to perform his work. This study focused on the discovery of an industrial and age-related influences on the work ability and job stress of workers in the shipbuilding, house managing, apartment construction industry. For this, the study conducted a job stress test using the Korean Occupational Stress Questionnaire Short Form, and employee performance evaluations using the Work Ability Index (WAI) of the Finnish Institute of Occupational Health (FIOH) on 3,228 workers in the shipbuilding, house managing and apartment construction industry. SPSS 12.0 K statistics program was used for statistics analysis and significance was verified with the Kruskal-Wallis test, a corporate body of nonparametric statistical analysis. As a result, employee performance had significant differences, depending on age, an industrial and years of service. The mean WAI score of the shipbuilding industry was lower than that of the other industry. Additionally, it was found that employee work ability decreased more as job stress increased.

일부 종합병원 중앙공급실에서의 Ethylene Oxide 노출에 관한 연구 (A Study on Worker Exposure to Ethylene Oxide in Central Supply Sterilizing Room of Hospital)

  • 서상옥;백남원
    • 한국산업보건학회지
    • /
    • 제5권1호
    • /
    • pp.68-86
    • /
    • 1995
  • This study was conducted at five Ethylene Oxide(EO) sterilizing processes in hospitals located in Seoul from August 8 to August 30, 1994. The main purposes of this study were to assess the TWA(Time Weighted Average) and short term exposures to EO and to evaluate factors affecting EO concentrations in sterilizing room. Results are summarized as follows. 1. The TWA concentrations of the sterilizing operators ranged from <0.005ppm to 3.04ppm and those of two sterilizing rooms out of five exceeded 1ppm, the Korean and ACGIH standards. 2. When the door of the sterilizer is opened at the end of the sterilization cycle, the short term concentrations of operators ranged from <0.005ppm to 11.4ppm, and those of three sterilizing room out of five exceeded 5ppm, the ACGIH short term exposure limit(STEL). The short term concentrations of area samples ranged from 0.24ppm to 49.2ppm and those of four sterilizing room out of five exceeded 5ppm. 3. Factors affecting EO exposure level were aeration type, the location of storage site for sterilized item, amount of gas, use period of sterilizer(p<0.005). 4. Following recommendations are suggested to minimize exposure to EO. The use of EO gas should be reduced by using another available sterilization methods, and the sterilizers and gas tank storage site should be isolated from, other work areas. Combination of local and general ventilation system should be installed. Metal carts or baskets for sterilization load should be used, and work environment and medical monitoring should be performed regularly.

  • PDF

건성 와이어방전가공 프로세스 특성에 관한 실험적 연구 (Experimental Study on Characteristics of Dry Wire Electrical Discharge Machining (EDM) Process)

  • 이상원;김홍석
    • 한국정밀공학회지
    • /
    • 제27권1호
    • /
    • pp.11-17
    • /
    • 2010
  • This study investigates the non-traditional manufacturing process of dry wire electrical discharge machining (EDM) in which liquid dielectric is replaced by a gaseous medium. Wire EDM experiments of thin workpieces were conducted both in wet and dry EDM conditions to examine the effects of spark cycle (T), spark on-time ($T_{on}$), thickness of work pieces, and work material on machining performance. The material removal rate (MRR) in the dry wire EDM case was much lower than that in the wet wire EDM case. In addition, the thickness of workpiece and work-material were found to be critical factors influencing the MRR for dry EDM process. The relative ratios of spark, arc and short circuit were also calculated and compared to examine the effectiveness of processes of dry and wet wire EDM.

드론을 활용한 고정밀 토공량 산출 시스템 개발 및 평가 (Development and Evaluation of High-precision Earth-work Calculating System using Drone Survey)

  • 김세원;김영석
    • 한국지반신소재학회논문집
    • /
    • 제18권4호
    • /
    • pp.87-95
    • /
    • 2019
  • 토공량 산출은 건설현장에서 최적 공사비 산정을 위한 데이터로 정확한 토공량은 토목 공사의 설계 단계에서 시공단계까지 고려되어야 하는 중요한 요소이다. 토공량 산출을 위해서는 정확한 지형 자료와 정밀한 토공 부피 계산이 필요하다. 본 논문에서는 짧은 시간에 정확한 지형 파악이 가능하고, 경제성 측면에서도 장점을 갖는 드론 측량 기술을 이용하여 고정밀 토공량 산출 시스템을 도출하였다. 시스템의 정확도 검증을 위해 현장 검증시험을 수행하였으며, 드론을 이용한 토공량 산출 결과와 GPS 측량 장비를 이용한 토공량을 비교·분석하였다. 또한, 새롭게 개발한 토공량 부피 계산 알고리즘을 기존 항공사진측량 소프트웨어(Pix4D) 계산 방식과 비교하여 정확도를 검증하였다.

여뀌과 이형경식물의 Dinorphism과 Bisexuality의 변화 (STUDIES ON THE DIMORPHISM AND TRANSITION OF BISEXUALITY OF HETEROSTYLOUS POLYGONACEAE)

  • Harn, Chang-Yawl
    • Journal of Plant Biology
    • /
    • 제3권2호
    • /
    • pp.6-18
    • /
    • 1960
  • The present experiments were designed in order to clarify the differences between the long and short styled plants and the transgressive gradition in the degree of dimorphism among the three heterostylous species of the Polygonus, P. japonica, F. esculentum, and P. senticosa, based on investigations regarding the floral structure, ecological and physiological traits, the results of which are summarized as follows: (1) P. japonica, although it exhibits typical dimorphism, has undergone so high a differentiation between long and short styled that its long styled individuals behave as if they were female; and short styled individuals as if male. In long-styled individuals, filament, anther, and pollen grains show signs of degeneration, most of the pollen being abortive. On the other hand, in short styled individuals, the filament, anther, and pollen grains have attained remarkable development; the pollen grians are large and fertile. In short-plant the fertilized flowers readily drop off in every stage of their embryo development. This species has completely lost the self-fertile property, which is characteristic of the non-dimorphic Polygonum genus. Although this specsei typically exhibits the physiological characteristics of the non-dimorphic Polygonum genus. Although this specisei typically exhibits the physiological characteristics of dimorphism in controlled pollination, the short-styled individuals bear no seed in nature, thus misleading taxonomists to idenfity the short-styled plant as male. 2) The morphological feature of the flower organ of P. senticosa obviously indicates definite dimorphism. Physiologically, however, no differentiation towards dimorphism was observed, the species still retaining, both in long and short-individuals, the self-fertile property common to the Polygonum genus. Elaborate examinations revealed that regardless of the modes of pollination, both fertiization and seed setting flourish, no differentiation betwen legitimate and illegitimate unions being recognizable. This sort of physiological property has not been observed in the investigations of other heterostylous plants. It is assumed that this species is differentiated structurally into dimorphism, but not yet physiologically. In nature, however, this plant would have more opportunities to be cross-pollinated, i.e., legitimately combined, than self-pollinated because of the development of two forms of flowers. 3) In terms of heterostylism, the F. esculentum just occupies the intermediate position between P. japonica and P. senticosa structurally, ecologically, and physiologically. Doescription of some of the physiological behavior of the plant will suffice to demonstrate the above facts. While P. japonica has completely lost its self-fertile property, P. senticosa still retains it wolly. In F. esculentum 2-6% of self-fertility is the result in illegitimate combination. There occur occasionally hereditary self fertile individuals among some of the F. or 20 min. irradiation plot, when they reach any stage of the same bacterial population. In addition to this increase of total population in the plots with the more dose of UV light irradiation, it seems that the more dose of UV light irradiation is the more shortened the generation time of Azotobacter. Therefore, it is clear that variation of reproductive rate must be, mere or less, due to the genetic effects induced by UV light irradiation. On the other hand, the lag phase or logarithmic growth phase in nonirradiated culture is shortened prominently, and this must be due to the difference in bacterial number of the original inoculm. The generation time of Azotobacter is shortened by exogeneous treatment of nuclei acid derivatives, and the degree is greater in case of DNA derivatives than RNA dervatives. W.H. Price reported that the rate of ribose nucleic acid to protein in Staphylococcus muscae is proportional to the generation time: that is the faster the cell can form ribose nucleic acid, the more rapid its growth. This explains the shortening of generation time by exogeneous RNA derivatives in this work reasonably. On the other hand, it is well known that the desoxyribose nuclic acid content per cell is constant and independent of the generation time. A.D. Laren and W.N. Takahashi reported that the infectious RNA from TMV is 6 times as sensitive to inactivation by UV as it is in the form of intact virus, and that inactivation of infectious TMV involves onlu a local change on RNA chain. But, the effect of exogeneous DNA in this work suggests that irradiated living cell which cotain DNA bring about some change on DNA moleculs as well as RNA molecules. And if the mutagenic effects of UV take into consideration, it is very reasonable. Therefore, it is clear that the variation of the generation time by UV irradiation is, more or less, due to the genetic effects. Therefore, it seems that the shortness of the average lifewpan of Azotobacter by UV irradiation is resulted not only from the influence of the environmental conditions, but also from the variation of genetic factor of the individual.

  • PDF

'매향' 딸기 삽목묘와 유인묘의 노동 기간, 작업 시간 및 생육 비교 (Comparison of Labor Period, Work Time, and Seedling Growth in Cutting and Pinning Transplants on 'Maehyang' Strawberry)

  • 황희성;정현우;강재현;황승재
    • 생물환경조절학회지
    • /
    • 제30권4호
    • /
    • pp.257-262
    • /
    • 2021
  • 유인 방법은 딸기 묘를 생산하는 전통적인 방법이다. 그러나 딸기 묘를 유인하여 번식하는 방법은 오랜 노동시간이 있어야 하는 노동 집약적인 방법이다. 삽목 방법은 상대적으로 유인 방법에 비해 노동 기간과 작업 시간이 짧으므로 유인의 효과적인 대안으로 주목되어왔다. 이 연구는 유인과 삽목 사이의 노동 기간, 작업 시간 및 묘의 생육을 조사하기 위해 수행되었다. '매향' 딸기는 두 개 동의 딸기 육묘용 유인 온실과 삽목 온실에서 각각 재배되었다. 유인 방법(유인 작업, 모주 제거, 자묘 간 분리) 및 삽목 방법(삽수 채묘, 저장 전 처리, 삽목 작업)에 대한 주요 작업 시간을 측정했으며, 유인은 158일 동안 6개의 작업이 필요하며, 삽목은 113일 동안 4개의 작업이 필요했다. 유인은 삽목보다 작업 시간이 더 많이 필요했다. 유인과 삽목묘 육묘 방법에 따른 유의적인 차이가 없었다. 이러한 결과는 묘소질의 손실 없이 육묘 동안 유인 방법보다 삽목 방법이 더 많은 노동 기간과 작업 시간을 절약할 수 있음을 의미한다.