• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1610-1619
• /
• 2004

While researches and studies on short distance wireless communications have been actively carried out, studies on many applications of short distance wireless communications focusing on user-oriented Mobile device are also in progress. Since Bluetooth has several advantages that existing short distance communication does not have, studies on standardization have been carried out focusing on SIG, and IEEE has also jointly studied on this. Bluetooth is a short distance wireless communication technology that can be usefully applied to various kinds of applications. In this regard, this thesis presents payment system using Bluetooth, out of several application technologies of Bluetooth. This payment system is based on the scenario in which secure piconet is formed focusing on the user, the user gets in the car, fill up the gas at the gas station using his own Mobile device and pay The secure payment system presented in this thesis is designed to complement the weakness of existing Bluetooth in terms of security and to secure several requirements of security required for payment using short distance wireless communication.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.305-308
• /
• 2001

In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band and a microprocessor. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated 긴ta bits with stored data bits in a PC connected with demodulator. The RF module in the experiments works oかy in the bandwidth, 424MHz - 429MHz. with FM mode. The signal level degrades as the distance between transmitter and receiver increases we measured the signal level and bit error in the building of engineering college of our university. we present the measured data with various locations in the building. and the data may be used in design short distance network in a building.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.761-768
• /
• 2017

As the loss prevention system using bluetooth has a short communication range, it has a problem which its location is not known if it is strayed out of a certain distance. To overcome shortcoming of such an existing loss prevention system, this paper proposes a GPS-based wireless loss prevention system without communication fee using the LoRa Communication with a long distance. The proposed system performs a remote control application on the smart-phone and then is able to get a long-distance GPS coordinates about the location of the loss prevention system on the google map. For performance evaluation of the implemented proposed system, the experiments for transmitting and receiving data are done in open terrain, indoor and outdoor areas and the experiment results identified the superiority of the proposed system in the long-distance.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.197-200
• /
• 2002

This paper is about a system development which control and monitor a PLC of the remote-distance through the Internet using the web-browser. In general, the PLC uses its own communication protocol of PLC Manufacture. It is actually impossible to be used through the Internet, because the PLC communication protocol is basically developed to be suitable for short-distance. Therefore, what we need is a transformation system which can convert the PLC communication protocol into the form which can connect to the Internet. In that sense, this paper is that about remote-control method through the WWW ( World Wide Web ). This system have three characteristics. First, it is possible to connect the Internet directly irrespective of CPU, Operating system and browser. Second, it is easy for user to access and treat. Third, it needs only HTML to operate without java or plug-in expansion. In this paper, we will introduce the monitoring and control system of PLC on the Linux with the Apache web-server.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.171-176
• /
• 2003

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS(None Line of sight) data transmission is needed; often ranges more than 1200 km. It has been, however, so far considered unsuitable for distance as short as 700km application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper introduce experimental characteristics of very shot distance MB(Meteor Hurst) path. Also the occurring rate and average length measured on 50km paths between kyongsan-city to Andong-city shows that Meter Burst communication is useful communication system in mountain and valley communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.286-293
• /
• 2000

This paper treats performance analysis and improvement of DSRC physical layer which is discussed for standardization at the ISO TC-204 WG-15. DSRC is a short range wireless communication for which distance is less than 100m between RSU and O BE, since DSRC requires cheap and simple modulation technique, ASK is being developed as standard modulation system among PSK, FSK and ASK in our country. This paper analyzes the performance of DSRC physical layer system which is at the first stage of development under Rician fading channel, more sepcifically, the validity of the system and the performance limitations are shown. Both equalizer and antenna diversity techniques are simulated to improve the ASK system performance.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.629-633
• /
• 2008

Recently, there has been great interest in the application of short-range wireless communication system. In this paper, the miniaturized FM transmitter with low power is developed, and laboratory tests have been carried out. The FM transmitter uses FM radio waves to send sound from any system (MP3, PMP, PDA, MP3 Phone et.) to any nearby radio or stereo system. The transmitter is designed with $2.6cm{\times}2.6cm{\times}2.6cm$ system size. The operating voltage is 3.7 V and used the built-in storage battery. The system can use continuously during 7 hour with once charging. The transmission frequency can select one of 88.1 MHz, 88.3 MHz, or 88.5 MHz in compliance with utility condition. The channel separation ability is 40 dB. The operating temperature is $-10{\sim}+85^{\circ}C$, which use in the industry environment. Consequently, this system sis used conveniently with short distance information transmitter system at the industry field.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.156-158
• /
• 2006

A super-regenerative receiver is designed and tested at 433 MHz ISM band, The designed receiver has the data rate of up to 200 kbps and a power consumption of 10 mW. We carried out the system performance test for the TX power of 0.1 mW and 1 m distance. The result of the bit-error rate test shows one bit error among the 4000 bits.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.93-99
• /
• 2014

Recently Wireless communication among short-distance devices has come to notice due to smart phone generalization recently. However, instead of setting up additional H/W, communication technology providing wireless communication based on S/W is in need due to limited availability of NFC's use. Accordingly, short-distance wireless communication technology that makes great use of mike and speaker which installed in every device draws attention. Our thesis suggests improvement of acoustic transmission speed by applying multi-channel parallel transmission and advancement of transmission rate that differed from each mike's own characteristics through optimizing adaptive threshold. The study is not only just applied in specific and limited conditions such as promoting corporation and payments system but also fast and convenient data transmit system general users-oriented.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.