• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.964-972
• /
• 1999

In this paper, we proposed a simulation model to which apply the AAL 2 (AAL type 2) between BSC and MSC in the cellular mobile communication systems. We suggested the frame structure of processing the packets of short length and the scheme which multiplex to one or more ATM cell. Also, we analyzed the performance of the APR, transmission delay, and channel transmission efficiency used in the packetized voice traffic and the low bit-rate data traffic such as fax. From the simulation results, the maximum number of users are 47 users without using AAL 2 multiplexing, but the maximum number of users are 70 (Non-Overlapping scheme) users, 110 (Overlapping scheme) users, respectively. Thus, we knew that the Overlapping scheme is more efficient than the Non-Overlapping scheme. Finally, we showed that the optimum transmission buffer size is 4 ATM cells in the cellular communication systems with the bandwidth of 2 Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.485-492
• /
• 2010

Intelligent Transport System(ITS) has been studied in various systems, such as road environment information offering, vehicle short-range wireless/wire communication, vehicle collision preventing and pedestrian safety offering systems. Related to this, the USN technology based on the sensing accuracy for motorists and pedestrians safety, the information reliability, the maintenance and convenience for Sensor Network is highlighted. This study uses various sensors to construct USN to the road, and connect it to the developed RSU so it collects the real-time road environment information and offers it to OBU and Traffic Control Surveillance Center with Road Weather Information System. RSU collects roadside information for driver's safety and analyzes it to offer IP and beacon service according to the service priority to OBU & upper layer terminal. In the upper layer terminal it is developed the IP based Settop Box application program to offer the urban traffic information & road environment, and environment sensor error, etc. Finally, RWIS develops the real-time collection of roadside information to complement the driver's safety to the intelligent traffic system, and presents various service modes with technology convergence.

• Human Ecology Research
• /
• v.55 no.6
• /
• pp.661-673
• /
• 2017

This study analyzes the current wearing status and awareness of warning clothing for elementary school students as well as to identify points of improvement for traffic accident prevention and clothing safety education. A survey was conducted on 279 elementary $5^{th}$ and $6^{th}$ graders in the Incheon area and Ansan in 2017 June & July. The results showed that more than 2/3 of participants had no experience wearing warning clothing. Second, 63% of participants answered 'traffic accident prevention' as the main purpose of warning clothing, showing that about 2/3 are aware of the importance. Third, yellow was the most preferred color of fluorescent material for warning clothing with a significant difference of preference by grade. The favorite color combination of participants was yellow & orange followed by yellow & light green, but showed a significant difference between boys and girls. Fourth, the most preferred form of warning clothing was fluorescent short sleeves and shorts without reflective tape, suggesting that students paid more to the purpose for reflective tape. Fifth, while 68% of participants were negative towards wearing safety clothes that are currently available, 66% were willing to try safety clothes if the color and the design improved. The results suggest an improved education with more emphasis on the purpose of clothing safety. Color and design adjustment of the current warning clothing is also recommended for a more active participation by elementary school students.

• Journal of the Korean housing association
• /
• v.25 no.4
• /
• pp.39-46
• /
• 2014

This research was for the investigation and analysis of the illustration of modular construction application which is different use by each school facility since modular construction related examples are rare in domestic situation, and it has a limitation because of its being basic research material for generating the basic form of modular construction. The research results are as followings. First, in case of school facility from illustration investigation results, module measurement of class modulation is as similar as $3m{\times}10m$, but in resident facility the planning of more flexible plane shape can be possible since modules of 6 cases are free and various, and facade form of various types can be appeared by combination of module unit. Second, as a result of the generated characteristics in compared analysis of representative examples, school facilities were highly indicated for movability and duration reduction areas, and the flexibility, economic efficiency, and environment-friendliness was indicated low relatively. Third, the basic planning types of modular construction can be largely divided into layered type, horizontal (straightway) type, and compound type. The layered type has a short traffic line and facility system and is appropriate for the low-rise form unless separate construction method is used since it is susceptible to load. The horizontal type is advantageous for securing an opening since it has wide extent in light but has a long traffic line and facility system. Finally, the compound type can be possible for planning of various forms but needs the combination of various unit modules and traffic line and facility plan for it can be difficult.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.613-619
• /
• 2003

Bluetooth is a communication technology enabling short-range devices to be wirelessly connected. A master and one or more slave devices are connected to form a piconet, and piconets are joined to form a scatternet. The units participating in two or more piconets in a scatternet, is called bridge or gateway nodes. In order to operate the scatternet efficiently, both piconet scheduling for the master and slaves of a piconet, and scatternet scheduling for the bridge nodes are playing important roles. In this paper, we propose a traffic-adaptive dynamic scatternet scheduling algorithm based on rendezvous points and rendezvous windows. The performance of the proposed algorithm is compared and analyzed with that of a static scheduling algorithm via simulations. Simulation results show that our algorithm can distribute wireless resources efficiently to bridge nodes depending on the traffic characteristics.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.187-196
• /
• 1999

The increasing interest in the use of Automated Speed Enforcement (ASE) systems in Korea enables to enforce speed violation by National Police Agency. We have analyzed the mechanism of ASE systems on traffic safety throughout Korea. 1 The data collected on a 2km road-section of each 32 ASE stations during one rear period indicate significant safety improvement. The results were (a) a decrease in the total number of accidents of 28%, (b) a decrease in the number of fatalities of 60%. 2. The study also that ASE systems are effective to reduce average speed, speed variance, and short headway. 3. Based on the operational data collected at 15 locations, an aggregate safety prediction model is proposed as a multiple regressions form. The primary operational variables that appear to affect the frequencies of accident are : average speed, speed variance, and the number of vehicles exceeding 30km/h of posted speed limit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2195-2200
• /
• 2008

The use of WLAN technology specially 802.11 b and g has seen huge subscriber growth in a relatively short time period due to low cost and ease of installation of WLAN hardware. These technologies provide multiple data rates ranging from 1 to 54 Mbps depending on modulation used in physical layer. This paper presents the performance of 802.11b and g under different data rates in mobile IPv4 environment. OPNET is used in the study as the network simulator. The performance metrics used in this wort is data traffic received by a WLAN station roaming amongst Access Point(AP) of different ESSs. It is found that much data packets are lost during handover between mobile agents. The traffic received by the roaming station varies based on the data rates provided by two different WLAN technologies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1500-1505
• /
• 2019

Currently, as part of the ICT Smart City, the company is building C-ITS(Cooperative-Intelligent Transport Systems) for solving urban traffic problems. In order to realize autonomous driving service with C-ITS, the role of advanced road infrastructure is important. In addition to the study of mid- to long-term C-ITS and autonomous driving services, it is necessary to present more realistic solutions for road traffic safety in the short term. Therefore, in this paper, we propose a highway accident detection alarm system that can detect and analyze traffic flow and risk information, which are essential information of C-ITS, based on IoT guard rail and provide immediate alarm and remote control. Intelligent IoT guard rail is expected to be used as an intelligent advanced road infrastructure that provides data at actual road sites that are required by C-ITS and self-driving services in the long term.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.2
• /
• pp.121-130
• /
• 2023

The RGB (red, green, and blue) imagery analysis is an important remote sensing tool, which estimates the effect of environmental stress on turfgrass growth and physiology. Therefore, this study investigated the effect of continuous wear stress treatment on Zoysia japonica through RGB imagery analysis. The results of the growth measurement showed that the plant height substantially decreased, after nine hours of treatment with no considerable difference thereafter. Dry weight measurement showed a substantial difference in the morphological growth characteristics of the aerial part of the turfgrass, but none in the stolon and root zone. This could be attributed to the short period of compaction treatment. The ROS (reactive oxygen species) analysis showed that ROS rapidly increased due to wear stress treatment. The MDA content increased during the traffic process, whereas the green pixels increased and decreased repeatedly; however, overall, the trend declined but the overall trend decreased. Thus, this study confirmed that MDA was effective in reflecting the wear stress of turfgrass; however, it could through RGB image analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.57-67
• /
• 2021

A thorough administration of the arterial road network requires a continuous supply of updated and accurate information about the traffic that travels on the roads. One of the ways to effectively obtain the traffic volume and weight distribution of heavy vehicles is the BWIM technique, which is actively being studied. Unlike previous studies, this study was performed to develop a simplified Bridge Weigh-In-Motion (BWIM) algorithm that can easily estimate the axle spacing and weight of a traveling vehicle by utilizing the structural characteristics of the bridge. A short span RC T-beam bridge with no crossbeam installed was selected for the study, and then the strain response characteristics of bridge deck and girder was checked through preliminary field test. Based on the preliminary field test results, a simplified BWIM algorithm suitable for the bridge to be studied was derived. The validity and accuracy of the BWIM algorithm derived in this study were verified through field test. As a result of the verification test, the proposed BWIM algorithm can estimate the axle spacing and gross weight of the travelling vehicles with the average percent error of less than 3%.