• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.23-32
• /
• 2000

In this paper, we present a Web-enabled product data sharing system for the support of RPD (Rapid Product Development) process by incorporating STEP (STandard for the Exchange of Product model data) with Web technology such as VRML (Virtual Reality Markup Language), SGML (Structured Generalized Markup Language) and Java. Extreme competition makes product life cycle short by incessantly deprecating current products with a brand-new one, and thus urges enterprises to devise a new product faster than ever. In this environment, an RPD process with effective product data sharing system is essential to outstrip competitors by speeding up the development process. However, the diversity of product data schema and heterogeneous systems make it difficult to exchange the product data. We chose STEP as a neutral product data schema and Web as an independent exchange environment to overcome these problems. While implementing our system, we focused on the support of STEP AP 203 UoF (Units of Functionality) views to efficiently employ STEP data models that are maximally normalized, and therefore very cumbersome to handle. Our functionality-oriented UoF view approach can increase users'appreciation since it facilitates the modular usage of STEP data models. This can also enhance the accuracy of product data. We demonstrate that our view approach is applicable to the configuration control of mechanical assemblies.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.1
• /
• pp.45-59
• /
• 2013

A long-term forecasting method for a new product in early stage of diffusion is proposed. The method includes a constrained non-linear least square estimation with the logistic diffusion model. The constraints would be critical market informations such as market potential, peak point, and take-off. Findings on 20 cases having almost full life cycle are that (i) combining any market information improves the forecasting accuracy, (ii) market potential is the most stable information, and (iii) peak point and take-off information have negative effect in case of overestimation.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.75
• /
• pp.159-177
• /
• 2017

In this paper, we examined trends and regulations of the global medical equipment industry through literature search. The medical equipment industry is attracting attention as a new growth engine in the Fourth Industrial revolution. However, the medical device industry is a highly competitive field due to product diversity, short product life cycle and technological advances. In addition, Medical equipment are related to human health and safety. Therefore, it can only be exported if it is approved by national or international standards. Therefore, from the development stage of the product, the medical equipment should designate the country to be exported and develop a medical equipment that meets the requirements for licensing the medical equipment in the country. Therefore, In this paper, In this paper, we will present the practical considerations of the medical equipment exporting company by examining the global medical equipment market trends and the regulations related to medical equipment in major countries.

• Management Science and Financial Engineering
• /
• v.11 no.3
• /
• pp.125-136
• /
• 2005

As the importance of time-based competition is increasing, information systems for supporting the immediate decision making is strongly required. Especially high -tech product firms are under extreme pressure of rapid response to the demand side due to relatively short life cycle of the product. Therefore, the objective of our research is proposing a framework of estimating demand curve based on e-auction data, which is extremely easy to access and well reflect the limited demand curve in that channel. Firstly, we identify the advantages of using e-auction data for full demand curve estimation and then verify it using Agent-Eased-Modeling and Tobin's censored regression model.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.163-169
• /
• 2006

A Life Cycle Assessment (LCA) study was carried out to identify and improve the environmental aspects associated with the present incineration system of spent Li-ion batteries (LIBs) in Korea. The environmental impact associated with the landfill of the incineration ash was also assessed in this study, while so far it was excluded in most studies. It was found out that the $CO_{2}$ emission from the electricity generation as well as the incineration process and heavy metals emissions to air and water accounted for about 90% of total environmental impacts. In particular, the effect of the emission of heavy metals were dominant. In oder to improve the current incineration system environmentally, it is needed to incinerate the wastes like spent LIBs which contained relatively high portion of heavy metals separately from other combustible wastes. On the other hand, the effect of the landfill of ash after incineration was insignificant since the ash from the incineration process was chemically stable.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.9
• /
• pp.527-533
• /
• 2017

Environmental concern about smart phone is growing because it has short product life span while having intensive production technology and cost. In this study environmental impact of the smart phone is quantified using the LCA methodology based on the ISO 14040 series standards. The assessment considers potential environmental impacts across the whole life cycle of the smart phone including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages. The pre-manufacturing stage is the most dominant life cycle stage causing the highest environmental impacts among all 10 impact categories assessed. The global warming impacts of the smart phone in the pre-manufacturing, distribution, use, manufacturing, and end-of-life stages were 52.6% 23.9%, 15.7%, 7.0%, and 0.8%, respectively. Sensitivity of the life cycle impact assessment results to the system boundary definition and assumptions made were quite high. Three components of the smart phone, PCB, battery, and display module were identified as the key components causing majority of the potential environmental impact in the pre-manufacturing stage. As such the slim and light-weight design and the use of environmental friendly materials are important design factors for reducing the environmental impact of the smart phone.

• The Journal of Society for e-Business Studies
• /
• v.1 no.2
• /
• pp.27-47
• /
• 1996

Manufacturing companies must have close relationships with cooperative companies and customers under dynamic market surroundings. Not only product life cycle, but also the allowed period between development of product and sale becomes shorter. In spite of these situations, most manufacturing companies have insufficient capabilities of the information technology and data exchange formats between companies are so different. Thus, there exists a limit on the efficient management of companies. These problems in manufacturing companies could be solved by CALS. Through CALS the company responses quickly to customer demand, transfers this information to manufacturing systems automatically, and distributes products at appropriate time In short, CALS is a strategy to distribute products satisfying with quality, cost and delivery. And up to now, most manufacturing companies have proceeded CIM systems. In this paper, an approach for the efficient building CALS system through extension of CIM in the manufacturing companies is proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.724-728
• /
• 1997

A CAD system of grid element for vacuum fluorescent disply has been developed. In order to reduce design man-houre and human erros, it is used to automate the design process using a knowledge base system. In the case of VFD product design, the most important consideration is the short-life cycle. So the development of CAD system for VFD product is needed. The developed system is based on the knowledge base system which is involved in a lot of expert's technology in the practice field. Using C-language under the HP-UNIX system, CIS customer language of the EXCESS CAD/CAM is used as the overall CAD environment. Results of this system will provide effective aids to the designer in this field

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.829-835
• /
• 2016

Electro-Mechanical Actuator installed on the aircraft plays a key role in an aircraft's flight control through flight control computer. Reliable prediction of the actuator is important for the aircraft. To estimate the lifetime of a product, it is necessary to test full target life. However, it is very difficult to perform it due to the long life time of actuator but short period of development time with increasing cost. Therefore, accelerated life test has been used to reduce the test time for various reasons such as reducing product's development cycle and cost. In this paper, to predict the lifetime of the actuator, we analyzed the flight profile of aircraft and adapted the method of accelerated life test in order to accelerate failure modes that might occur under user conditions. We also set up an endurance test equipment for validating the demanded lifetime of an actuator and performed accelerated life test.