• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.4
• /
• pp.386-397
• /
• 2008

Due to the rapid advancement of technologies, a growing number of innovative products with a short life-cycle have been introduced to the market. As the life-cycles of such products are shorter than those of durable goods, the demand variation during the life-cycle adds to the difficulty of inventory management. Traditional inventory planning models and techniques mostly deal with products that have long life-cycles. The assumptions on the demand pattern and subsequent solution approaches are generally, not suitable for dealing with products with short life-cycles. In this research, inventory replenishment problems based on the logistic demand model are formulated and solved to facilitate the management of products with short life-cycles. An extended Wagner- Whitin approach is used to determine the replenishment cycle, schedules and lot-sizes.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.293-301
• /
• 2017

Most new products not only suddenly disappear in the market but also quickly cannibalize older products. Under such a circumstance, retailers may have too much stock, and customers may be faced with difficulties discovering products suitable to their preferences among short life cycle products. To address these problems, recommender systems are good solutions. However, most previous recommender systems had difficulty in reflecting changes in customer preferences because the systems employ static customer preferences. In this paper, we propose a recommendation methodology that considers dynamic customer preferences. The proposed methodology consists of dynamic customer profile creation, neighborhood formation, and recommendation list generation. For the experiments, we employ a mobile image transaction dataset that has a short product life cycle. Our experimental results demonstrate that the proposed methodology has a higher quality of recommendation than a typical collaborative filtering-based system. From these results, we conclude that the proposed methodology is effective under conditions where most new products have short life cycles. The proposed methodology need to be verified in the physical environment at a future time.

• Journal of the Korean Society of Costume
• /
• v.56 no.3 s.102
• /
• pp.81-90
• /
• 2006

The objective of the study is to review trends of clothing export in important countries of the world and thus to know the present stage of clothing export in Korea. For the purpose, changes of export amount, competitiveness and product life cycle were analysed in the countries from the 1960's to the 1990's. The results are as following: First, on the aspect of export amount, industrialized countries lost the lead to newly industrializing countries from the 1960's. Developing countries, as China, win the lead. Second, on the competitiveness aspect, industrialized countries lost competitiveness to newly industrializing countries before the 1960's. And newly industrializing countries were outpaced by China in the export competitiveness from the early 1990's. Third, on the aspect of product life cycle, industrialized countries go first through each period of product life cycle, introduction, growth, maturity and decline, and they all, excluding Japan, sustained period of Maturity for a long time. newly industrializing countries and developing countries go orderly through each period of product life cycle after industrialized countries. As to Korea, duration of each period was short. Specially characteristics of decline period appeared partly in the early 1990's. From the results, the theory of product life cycle, helping to explain changes in production and trade in new product lines, estimated to applicable to clothing export. The phenomena, Italy, Hong Kong and America sustain high competitiveness in the world clothing market for a long time, is needed to be studied carefully. The study about strong points in their clothing industries and competitiveness drive program be to influence Korean export policy in the future.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.127-141
• /
• 1996

In this paper, we propose a 7-phase life cycle model which applies to Computer Integrated Manufacturing systems. The model emphasizes product design and manufacturing design activities of CIM to secure the critical success factors of CIM systems such as high quality, adaptability, productivity, and flexibility. It is argued that the product design aspect would be divided into three phases-conceptual design, embodiment design, and detialed design. The conceptual design phase is to build a conceptual model of the product based on requirements and specifications which reflect "the voice of the customer". THe embodiment design phase utilizes specific design tools such as DFM, CAE, and CAD, and results in a concrete model of the product and parts. The detailed design phase is to crete a working prototype of the product and design tools such as DFA. CAD and CAM are employed in this phase. The output of the product design activity is to be the input for the manufacturing design activity. Using the proposed model, one can effectively and efficiently manufacture a high-quality, low-cost product with short delivery time, and above all achieve customer'ssatisfaction.isfaction.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.327-335
• /
• 2013

Purpose: The purpose of this study is to suggest the modified 'Korean Standard-Quality Excellence Index' model and analyze the improvement effect with survey data by comparing the properness between current and suggested model result. Methods: The collected data through the survey were analyzed using paired t-test and unbalanced ANOVA method for testing the consistency of two customer satisfaction evaluating categories and comparing the current model to suggested model for confirming the improvement of performance. Results: The statistical analysis result shows that adjusted model using prior information improves the consistency between two customer satisfaction in case of short life-cycle product. Also long life-cycle product case, the result shows difference gap decreasing with same direction. Conclusion: Considering statistical model for QEI reflecting the characteristic of product group such as life cycle seems to be meaningful. Since index may be compared yearly base for checking the trend, careful approaching without big change should be considered for application.

• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.143-167
• /
• 2015

This paper addresses the issue how the total life cycle cost may be minimized and how the cost should be allocated to the acquirer and developer. This paper differentiates post life cycle change (PLCC) endeavors from PLCC activities, rigorously classifies PLCC endeavors according to the result of PLCC endeavors, and rigorously defines the life cycle cost of a software product. This paper reviews classical definitions of software 'maintenance' types and proposes a new typology of PLCC activities too. The proposed classification schemes are exhaustive and mutually exclusive, and provide a new paradigm to review existing literatures regarding software cost estimation, software 'maintenance,' software evolution, and software architecture from a new perspective. This paper argues that the long-term interest of the acquirer is not protected properly because warranty period is typically too short and because the main concern of warranty service is given to removing the defects detected easily. Based on the observation that defects are caused solely by errors the developer has committed for software while defects are often induced by using for hardware (so, this paper cautiously proposes not to use the term 'maintenance' at all for software), this paper argues that the cost to remove defects should not be borne by the acquirer for software.

• Laboraroty Animal Research
• /
• v.34 no.4
• /
• pp.264-269
• /
• 2018

Cell cycle dysfunction can cause severe diseases, including neurodegenerative disease and cancer. Mutations in cyclin-dependent kinase inhibitors controlling the G1 phase of the cell cycle are prevalent in various cancers. Mice lacking the tumor suppressors $p16^{Ink4a}$ (Cdkn2a, cyclin-dependent kinase inhibitor 2a), $p19^{Arf}$ (an alternative reading frame product of Cdkn2a,), and $p27^{Kip1}$ (Cdkn1b, cyclin-dependent kinase inhibitor 1b) result in malignant progression of epithelial cancers, sarcomas, and melanomas, respectively. Here, we generated knockout mouse models for each of these three cyclin-dependent kinase inhibitors using engineered nucleases. The $p16^{Ink4a}$ and $p19^{Arf}$ knockout mice were generated via transcription activator-like effector nucleases (TALENs), and $p27^{Kip1}$ knockout mice via clustered regularly interspaced short palindromic repeats/CRISPR-associated nuclease 9 (CRISPR/Cas9). These gene editing technologies were targeted to the first exon of each gene, to induce frameshifts producing premature termination codons. Unlike preexisting embryonic stem cell-based knockout mice, our mouse models are free from selectable markers or other external gene insertions, permitting more precise study of cell cycle-related diseases without confounding influences of foreign DNA.

• The Journal of Society for e-Business Studies
• /
• v.1 no.1
• /
• pp.173-194
• /
• 1996

In order to adapt today's short product life cycle and rapid technology changes., integrated systems should be extended to support PDM (Product Data Management) or CE(Concurrent Engineering). A PDM/CE environment has been developed and a prototype is Presented in this paper. Features of the PDM/CE environment are 1) integrated product information model (IPIM) includes both data model and integrity constraints, 2) database systems are organized hierarchically so that working data C8Mot be referenced by other application systems until they are released into the global database, and 3) integrity constraints written in EXPRESS are validated both in the local databases and the global database. By keeping the integrity of the product data, undesirable propagation of illegal data to other application system can be prevented. For efficient validation, the constraints are distributed into the local and the global schemata. Separate triggering mechanisms are devised using the dependency of constraints to three different data operations, i.e., insertion, deletion, and update.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.429-438
• /
• 2009

In order to find out the customer requirements and to develop new products more effectively, the Kano model and QFD(Quality Function Deployment), AHP(Analytic Hierarchy Process) developed and applied. But, Many companies difficult to select the CTQ(Critical to Quality) of new product. Especially the life cycle of cell phone is very short. In this thesis, the Kano model and AHP(Analytic Hierarchy Process) for finding the CTQ(Critical to Quality) for customer satisfaction are suggested. It is explained and discussed with the example of cell phone.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.359-369
• /
• 2010

In order to find out the customer requirements and to develop new products more effectively, the Kano model and QFD(Quality Function Deployment), AHP(Analytic Hierarchy Process) developed and applied. But, Many companies difficult to select the CTQ(Critical to Quality) of new product. Especially the life cycle of Digital Camera is very short. In this thesis, the Kano model and AHP(Analytic Hierarchy Process) for finding the CTQ(Critical to Quality) for customer satisfaction are suggested. It is explained and discussed with the example of Digital Camera.