• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.139-145
• /
• 2002

The flow zone through propeller jets are used in evaluating the environmental and constructional effects of navigation on the waterway. It relies on the characteristics of ships and water depth. A numerical model using the momentum theory of the propeller and Shield's diagram was developed in a restricted waterway. Equations for discharge are presented based on thrust coefficients and propeller speed and are the most accurate means of defining discharge. Approximate methods for discharge are developed based on applied ship's power. Equations for discharge are as a function of applied power, propeller diameter, and ship speed. Water depth of the waterway and draft of the shop are also necessary for the calculation of the grain size of the initial motion. The velocity distribution of discharge from the propeller was simulated by the Gaussian normal distribution function. The shear velocity and shear stress were from the Sternberg's formula. Case studies to show the influence of significant factors on sediment movement induced by the ship's propeller at the channel bottom are presented.

• Land and Housing Review
• /
• v.8 no.4
• /
• pp.257-266
• /
• 2017

LH has been using ultra high strength reinforcing bars (SD500 and SD600), since 2011. Such a change requires an adjustment of the old extra rates of bar splice to reflect use of ultra high strength reinforcing bars, as these rates had been set based on SD400 bars. It is particularly difficult to calculate precisely rebar lap-splice locations for large areas, such as those in apartment buildings. This research aims to adjust the extra rates of bar splice to reflect a reasonable rate; the rebar lap-splice length is not an exact estimation, but instead, an extra rates of bar splice is set and the rebar lap-splice length is increased by 2% (D 10) - 7% (025) depending on the bar size. The subjects of this study are LH apartments undergoing frame construction. We studied the quantity estimations from the design drawings, and analyzed the settlement quantities of construction field. The results of the study revealed that, when each of the quantities are analyzed, consider adjusting the extra rates of bar splice of some rebar to 1% - 3.5%. This was caused by an overuse of reinforcing bars in onsite construction and the use of supporting bars that have not been reflected in the documents, among other reasons. Based on the results of our study, an improvement plan for the current extra rates of bar splice seems to be necessary, cutting or raising the rate depending on the analysis of the data. Through this study, we expect to contribute to the calculation of reasonable construction costs, improvements in the quality of rebar work, and improvements in the capacity of design techniques for apartment buildings.

• Journal of Distribution Science
• /
• v.14 no.10
• /
• pp.153-164
• /
• 2016

Purpose - In general, large companies have larger organizations, funds, and systems to provide more effective and efficient services in the market. However, development needs to support the livelihood of ordinary citizens who work for small businesses as well. This research suggests that a new distribution channel, called a "foothold style Kosa mart," that cooperates jointly with a distribution center and a large discount mart can provide direct solutions to small and mid-size distributors. This new distribution channel can achieve a limited type of "Nadle shop (small supermarket) foster project" related to building a joint distribution center and improvement in wholesale supply. Research design, data, and methodology - Data about the Korea distribution situation, the Nadle stores, and the logistics centers were collected from literature, Statistics Korea, journals, and reports. Specifically, we investigated information about Kosa Mart and Nadle stores. We focused on the redesign of the distribution center for the Nadle store. Results - The Kosa Mart distribution center now includes 18 warehouses, and has been handling 2000-3000 items. Most of the warehouses have been simply designed and items loaded and stored without refrigeration; thus, it is possible to store only products of certain manufactured goods. The current logistics center has no wholesale function because it failed to resolve the joint purchasing and product supply issues of competitively priced products. Conclusions - This study aimed to identify ways to strengthen the competitiveness of small- and medium-sized retailers. A Kosa Mart redesign aims to unifying the logistics center, stores, and customers. First, the joint wholesale logistics system, equipped with an integrated ordering system, needs to process customer orders and store orders at the same time. Second, excellent small business product development has to connect with production. Third, the store composition needs to support a shipping hub. Fourth, the Mart differentiates itself from convenience store goods by supplying regional and specialized products to customers. Fifth, a service buying agent and direct transactions between producers and consumers need to be established, and exhibits and displays of goods need to be improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5060-5066
• /
• 2015

The number of shop needed for the fabrication of sphere type LNG tank is proportional to that of the tank radius to be constructed. Due to limitation of facility investment including building sites, it is practically difficult to fabricate various size tanks of perfectly spherical shape in the yards. The efficient method to increase cargo tank capacity is to extend vertically the conventional sphere type LNG tank by inserting a cylindrical shell structure. In this study, equations for static design loads are developed for sphere type LNG tank with central extension. The results of this study will be combined with dynamic design loads to build the simplified analysis method which enable the precise initial estimate instead of time consuming finite element analysis.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.295-302
• /
• 2006

The purpose of this study was to research the purchasing traits and the wearing satisfaction of ski wears to provide the data needed to design ski wears to the related industries. This survey was performed during 2003's and 2004's winter with the 157 questionnaires containing 16 items of purchasing traits, 8 of design satisfaction, 12 of purchasing satisfaction and 13 of satisfaction of using convenience. The data were analysed with the frequency, the percentile, $X^2$-test, the average, the standard deviation and t-test through comparing with the groups of general people and experts, and the groups of male and female. The results were:1.The most preferred style was the two pieces style(88.5%), and then the loose style(61.1%), and the shoulder-wireless style(36.9%). 2.The imported brands were more preferred because of the design(44.1%). 3.The main place of purchasing was the ski wear speciality shop(48.4%), the main source of the merchandise information was the surrounding men(43.3%), the most significant consideration aspect when purchasing was the design(35.7%), and the rate of size perception was 51.6%. 4.The wearing satisfaction score(5) of ski wears were; the satisfaction of design was 3.24, the satisfaction of material 3.00, and the satisfaction of using convenience 3.07. 5.In the rate of design satisfaction, the female(3.10) showed higher than the male(3.35) (p<.05). 6.In the satisfaction of material, 'the discoloration'(2.37), 'the abrasion'(2.75), 'the sense of volume'(2.76) and 'the sense of touch' showed dissatisfaction. 7.In the satisfaction of using convenience, 'the pollution by lifting ticket'(2.36)was showed most dissatisfaction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.5
• /
• pp.1004-1018
• /
• 2020

Advances in e-commerce enable consumers to shop efficiently for fashion products in global markets in addition, the market size of purchasing directly from foreign websites are also increasing. This study investigates the effects of hedonic and utilitarian shopping values on the continuous use intention of online cross-border shopping. Curiosity and self-efficacy were introduced as mediating variables between shopping values and user intentions. A web-based survey is conducted on female consumers, who have experiences to buy fashion products by online cross-border shopping. A total of 472 responses were collected from a panel of online survey firms. Data are analyzed using confirmatory factor analysis, structural equation modeling, and multi-group SEM by AMOS 21.0. According to the results of the structural equation model test, hedonic value affected continuous use intention of online cross-border shopping as mediated by curiosity and self-efficacy; in addition, utilitarian value influenced self-efficacy, which mediated relations between the utilitarian value and the continuous use intention. The research model was also tested to compare heavy users and light users of online cross-border shopping. For heavy users, the effect of hedonic value on curiosity was significantly stronger than for light users. Several implications are suggested based on the results.

• The Journal of Information Systems
• /
• v.31 no.3
• /
• pp.197-220
• /
• 2022

Purpose The purpose of this study is to identifies the demand pattern categorization of repair parts of Automotive After-sales Service(A/S) and proposes a demand prediction model for Auto repair parts using Long Short-Term Memory (LSTM) of artificial neural networks (ANN). The optimal parts inventory quantity prediction model is implemented by applying daily, weekly, and monthly the parts demand data to the LSTM model for the Lumpy demand which is irregularly in a specific period among repair parts of the Automotive A/S service. Design/methodology/approach This study classified the four demand pattern categorization with 2 years demand time-series data of repair parts according to the Average demand interval(ADI) and coefficient of variation (CV²) of demand size. Of the 16,295 parts in the A/S service shop studied, 96.5% had a Lumpy demand pattern that large quantities occurred at a specific period. lumpy demand pattern's repair parts in the last three years is predicted by applying them to the LSTM for daily, weekly, and monthly time-series data. as the model prediction performance evaluation index, MAPE, RMSE, and RMSLE that can measure the error between the predicted value and the actual value were used. Findings As a result of this study, Daily time-series data were excellently predicted as indicators with the lowest MAPE, RMSE, and RMSLE values, followed by Weekly and Monthly time-series data. This is due to the decrease in training data for Weekly and Monthly. even if the demand period is extended to get the training data, the prediction performance is still low due to the discontinuation of current vehicle models and the use of alternative parts that they are contributed to no more demand. Therefore, sufficient training data is important, but the selection of the prediction demand period is also a critical factor.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.2
• /
• pp.63-74
• /
• 2007

This study aims to develop rural house maintenance technique by researching and analyzing the demand for rural house by urban retirees or urbanites who are planning to retire. The target for the survey consisted of urban retirees or urbanites who are planning to retire at the ages between 40 and 65, and were divided into group A, the attendants in rural-related education, and group B, the non-attendants in rural-related education. The contents of the survey included the plan and purpose for rural settlement, the utilization form or residential form of rural house and its expected size, necessary in-house facilities, necessary community facilities, improvement and maintenance factors of rural house, political and legal support for the application of rural house maintenance, etc. The results findings of this study are as follows; 1)For both group, the major purpose of rural settlement appeared to be 'for rural life', utilization form of rural house to be 'acquired ownership or use of empty house', residential form to be 'cohabitation', expected size to be 'under $20{\sim}30$ pung', and expenditure to be 'under $50{\sim}100\;million$'. 2)Most wanted necessary in-house facilities included backyard, multipurpose storage room for group A, and backyard, garden for group B. Necessary community facilities included boardwalk, sewage disposal unit for group A, and boardwalk, shop for group B. 3)Improvement factor for rural house showed 'poor insulation' as first factor for both groups, and for maintenance factor, 'backyard', 'under-floor heating' for group A, and 'environmental-friendly materials', 'backyard' for group B. 4)Most wanted overall political and legal support included 'support on land and real estate supply' for group A, and 'medical and transportation service' for group B. For both group, most wanted support when purchasing a house included 'provision of information on house and realestate purchase', and for legal support, 'legal support for guaranteed house and maintenance' as first factor. The results of this study could be utilized to restructure the rural residence, which would meet the diverse demand of both rural residents and urbanites by providing an opportunity for urbanites to enjoy rural life.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.183-207
• /
• 2009

In general, the introduction of information technology to domestic small and middle size firms is depending on the governmental supporting policy. However, even under this situation there is also a case that the building up of information technology is initiated by the management of small and middle size firms. An accumulated know-how for information technology and powerful leadership in such firms are considered as success factors. This study attempts to analyze a case for 'THEFACESHOP', in which MIS is successfully built. To achieve corporate goals, the CEO of THEFACESHOP based on the extensive knowledge of information technology drove to build up information system. Also, the board of directors supported him, and employees committed to their organization. Through the strong leadership of the CEO, the information system of THEFACESHOP became sufficient and efficient. And it led the organization and the information system to be competitive. In particular, the systematic approach of THEF ACESHOP reinforcing its competitiveness can be summarized as follows: First, it tried to construct basic information systems as like ERP etc. to increase work-efficiency. Second, it completed CRM related systems for analysis to maximize its customer orientation and marketing effect. Third, the last step can be stated as the building up of operation related CRM systems to improve the responsiveness of target marketing activities and the profitability of its agencies. Such endeavors of THEFACESHOP contributed to increase productivity and performance of the organization. As a result, THEFACESHOP has had its own 'Natural Story' and price competitiveness. For that reason THEFACESHOP became the best of brand-shop cosmetic firms. This success based on the strong leadership and the systematic investment on the information system.

• Journal of Bio-Environment Control
• /
• v.10 no.1
• /
• pp.42-49
• /
• 2001

This study was carried out to develop a fuzzy control technique of ventilation window for controlling a temperature in a greenhouse. To reduce the fuzzy variables, the inside air temperature shop was taken as one of fuzzy variables, because the inside air temperature variation of a greenhouse by ventilation at the same window aperture is affected by difference between inside and outside air temperature, outside wind speed and the wind direction. Therefore, the antecedent variables for fuzzy algorithm were used the control error and its slop, which was same value as the inside air temperature slop during the control period, and the conclusion variable was used the window aperture opening rate. Through the basic and applicative control experiment with the control period of 3 minutes the optimum ranges of fuzzy variables were decided. The control error and its slop were taken as 3 and 1.5 times compared with target error in steady state, and the window opening rate were taken as 30% of full size of the window aperture. To evaluate the developed fuzzy algorithm in which the optimized 19 rules of fuzzy production were used, the performances of fuzzy control and PID control were compared. The temperature control errors by the fuzzy control and PID control were lower than 1.3$^{\circ}C$ and 2.2$^{\circ}C$ respectively. The accumulated operating size of the window, the number of operating and the number of inverse operating for the fuzzy control were 0.4 times, 0.5 times and 0.3 times of those compared with the PID control. Therefore, the fuzzy control can operating the window more smooth and reduce the operating energy by 1/2 times of PID control.