• 제목/요약/키워드: Shop Drawing

검색결과 50건 처리시간 0.028초

철근 이음조정률의 개선을 위한 설계견적 수량과 현장시공 정산 수량의 비교분석 연구 (Comparison of the quantity estimations from the design phase and the settlement quantities of construction field to improve the extra rates of bar splice)

  • 김상연;최보미
    • 토지주택연구
    • /
    • 제8권4호
    • /
    • pp.257-266
    • /
    • 2017
  • LH has been using ultra high strength reinforcing bars (SD500 and SD600), since 2011. Such a change requires an adjustment of the old extra rates of bar splice to reflect use of ultra high strength reinforcing bars, as these rates had been set based on SD400 bars. It is particularly difficult to calculate precisely rebar lap-splice locations for large areas, such as those in apartment buildings. This research aims to adjust the extra rates of bar splice to reflect a reasonable rate; the rebar lap-splice length is not an exact estimation, but instead, an extra rates of bar splice is set and the rebar lap-splice length is increased by 2% (D 10) - 7% (025) depending on the bar size. The subjects of this study are LH apartments undergoing frame construction. We studied the quantity estimations from the design drawings, and analyzed the settlement quantities of construction field. The results of the study revealed that, when each of the quantities are analyzed, consider adjusting the extra rates of bar splice of some rebar to 1% - 3.5%. This was caused by an overuse of reinforcing bars in onsite construction and the use of supporting bars that have not been reflected in the documents, among other reasons. Based on the results of our study, an improvement plan for the current extra rates of bar splice seems to be necessary, cutting or raising the rate depending on the analysis of the data. Through this study, we expect to contribute to the calculation of reasonable construction costs, improvements in the quality of rebar work, and improvements in the capacity of design techniques for apartment buildings.

설치 위치 정보를 포함한 배근시공상세도 작성 및 가공철근 자동 물량산출 시스템 개발 (Developing an Automatic System for Making a Placing Drawing and Quantity taking-off Cut and Bent Re Bar with Work Zone Information)

  • 박현용;이승현;강태경;이유섭
    • 한국건축시공학회지
    • /
    • 제8권2호
    • /
    • pp.63-70
    • /
    • 2008
  • Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results with work zone information.

3차원 골조정보모델을 이용한 철근배근 자동생성 시스템 (Development of the Rebar Auto Placing System Using 3D Structural Information Model)

  • 이병권;김치경;김계중
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2009년도 정기 학술대회
    • /
    • pp.72-75
    • /
    • 2009
  • 본 논문에서는 현재 국내에서 구축되어 있지 않은 3차원 BIM 기반 설계 및 시공 환경으로의 패러다임 전환에 대비하여 3차원 BIM 지향적 구조설계 프로그램인 SDP 제품군을 사용하여 BIM 프로그램들을 연동한 3차원 BIM 철근배근 자동생성 시스템을 개발하고자 한다. 현재 국내 건설업계의 치열한 수주경쟁으로 수익률저하/철근 등 자제가 폭등/인건비 상승/배근시공도 작성 인력 부족 및 신뢰성 저하 및 납기 지연 등의 기존 현황의 문제점 등을 SDP 제품군을 이용하여 구조설계/배근시공도 작성/정밀 골조물량 산출을 통합 지원하는 엔지니어링 컨설팅 환경을 구축하여 구조설계 시 V/E 동시 수행, 골조공사비 10% 절감, 배근시공도 및 물량산출 납기 최소로 단축, 배근시공도 정확성 향상/설계 및 시공 변경에 신속 대응, 공정 대비 발주 물량 관리 기능을 제공함으로써 고수익, 고효율, 고품질 의 엔지니어링 컨설팅 수행이 가능하다. 3차원 BIM 을 기반으로 철근현장가공에서 공장가공 전환 가속화로 국가적 물량 절감을 기대할 수 있고, 3차원 BIM 구조설계 및 골조공사 환경 구축 및 기술 자립을 통해 건설시공 분야의 기술력 향상을 기대할 수 있다.

  • PDF

이력 데이터를 사용한 노무생산성 모델링 및 측정 (Measuring and Modeling Labor Productivity using Historical Data)

  • 박영준;손창백;이동은
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 추계 학술논문 발표대회
    • /
    • pp.141-142
    • /
    • 2012
  • Estimating the productivity of labor has relied on the experience and intuition of an estimator, or productivity data, such as standard in practical estimation. However, when new technologies and new construction methods employed in the construction industry, Dependence of a quantity surveyor's intuition is increased. This is because of the lack of a systematic methodology which models, estimates, and measures the labor productivity, Due to the historical productivity data is unavailable. Even thought project history data contains information that is important to predict the performance of a project, It can not provide valuable information to model, estimate, and measure the labor productivity. This is because 1) the absence of the productivity measurement system with consistency, 2) the difficulty of reusability of historical data collected. Therefor, this study suggests a methodology which build a productivity model by measuring the productivity of labor and collecting the historical data systematically. In addition, this methology is applied to develop a productivity model of shop-drawing and manufacturing process using descrete event simulation.

  • PDF

BIM 기반 골조 물량산출 및 도면생성 모듈의 설계와 구현 (Design and Implementation of the Quantity Surveying and Shop Drawing System for Structures)

  • 이병권;김치경
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2011년도 정기 학술대회
    • /
    • pp.132-135
    • /
    • 2011
  • 최근 설계 단계에서 설계품질 향상과 시공 단계에서 비용 절감을 효과를 기대하며 3차원 BIM 관련 기술에 대한 관심이 높아가고 있으며, 또한 부분적으로 기술 도입 효과가 나타나고 있다. BIM 기술은 크게 BIM 도구를 활용하여 설계정보를 디지털화하는 모델링 단계 기술과 BIM 모델로부터 설계 정보를 추출하여 업무 진행에 필요한 형태로 가공, 변환하는 정보 활용 기술로 구분하여 생각할 수 있다. BIM 기술에 대한 근자의 높은 관심에도 불구하고 실제 현장에 적용되어 가시적인 성과를 내는 데에 한계를 보이고 있는 이유 중 하나로 후자의 정보 추출 및 활용 기술의 범위와 완성도의 한계를 들 수 있다. 즉 많은 노력을 통하여 BIM 모델을 구축하더라도 이를 기반으로 물량산출, 도면 생성 등 가장 기본적인 업무조차도 현장에서 바로 사용할 수 있는 수준의 기능이 제공되고 있지 않다. 본 연구에서는 건축 골조를 대상으로 3차원 골조 모델을 이용하여 골조 물량, 특히 정확한 물량산출이 상대적으로 어려운 철근에 대하여 철근의 이음, 정착 등이 고려된 실행물량을 산출할 수 있는 시스템을 설계하고 구현하였다. 또한 3차원 모델을 기반으로 철근 배근시공도와 가공일람표를 관련 기준에 따라 정확히 자동 작성함으로써 골조공사가 효율적으로 수행되고, 특히 정확한 이음 및 정착과 가공 계획을 통하여 철근 손실율을 최소화함이 기대된다. 본 논문에서는 이러한 BIM 기반 골조 물량산출 및 도면생성 시스템과 관련하여 주요 시스템 설계 내용과 구현 결과에 대하여 기술한다.

  • PDF

모바일 식품구매 서비스 고객여정의 경험만족도에 관한 실증연구 (The Empirical Research on the User Satisfaction of Mobile Grocery Shopping Customer Journey)

  • 이한진;권소연;민대환
    • Journal of Information Technology Applications and Management
    • /
    • 제28권4호
    • /
    • pp.59-78
    • /
    • 2021
  • Mobile Grocery Shopping (MGS) has become the New Normal as the COVID-19 pandemic has changed the way consumers shop. Drawing on the framework of Customer Journey Map (CJM), this study explores consumers' MGS by identifying specific stages of Customer Journey and comparing consumers' satisfaction between PC-based online and mobile shopping experiences at each stage throughout the journey. This study collected 562 responses from subjects who have mobile and PC-based grocery shopping experiences at the major domestic e-Commerce platforms. Independent t-test analysis showed that differences in satisfaction between mobile and online shopping experiences exist in 5 main stages and 16 sub-stages of CJM. The results of service and technological innovation mentioned in the actual industry report were seen as empirical results leading to continued use of MGS as well as customer satisfaction. The findings of this study contribute to the research stream on Customer Journey by adopting the structure of CJM and analyzing specific stages of the journey in the context of MGS. Managerial implications for mobile-based business practitioners are also discussed.

3차원 배근설계 및 배근시공도 작성 자동화 시스템 개발 (Development of 3-Dimensional Rebar Detail Design and Placing Drawing System)

  • 최현철;이윤재;이시은;김치경
    • 한국전산구조공학회논문집
    • /
    • 제27권4호
    • /
    • pp.289-296
    • /
    • 2014
  • 철근 공사에는 원청 건설사, 골조 전문건설사, 배근시공도 작성자, 철근 가공장, 감독/감리사, 구조설계자 등 다수의 업무 주체가 참여하고 있으나 이들간의 합리적인 협업이 이루어질 수 있는 업무 프로세스가 구축되어 있지 않아 비효율을 초래할 가능성이 높다. 특히 철근공사는 RC골조 품질에 결정적 영향을 주는 업무이지만 참여 주체간 원활한 협업 부재로 인하여 골조의 품질 저하, 생산성 감소, 공기 지연 등 많은 문제를 야기하고 있다. 그러므로 RC골조공사는 혁신이 매우 시급한 분야라 하겠다. 최근 BIM은 건설산업의 기술 환경 패러다임을 전환시키는 기술로 인식되고 확산되고 있다. 그런데 3차원 모델 상에서 방대한 양의 철근상세정보를 모델링하기 위해서는 많은 시간과 노력이 소요되고, 모델링 후에도 데이터량의 방대함으로 인하여 프로그램 성능이 원활하게 발현되지 않기에 BIM 기술의 확산에도 불구하고 배근 설계와 시공과 관련하여 BIM 기술이 활용되고 있지 않은 상황이다. 본 기술은 3차원 BIM 환경 하에서 골조상세정보 모델링과 배근상세설계, 정밀물량산출 및 공사관리까지를 지원하는 Rebar HUB를 개발하여 RC 골조 설계 및 공사 프로세스를 합리화할 수 있는 실용적 기술 개발을 목표로 하였다.

소매점 볼런터리 체인 활성화의 선행요인과 결과 (Antecedents and Consequences of Cooperation in Retail Voluntary Chain)

  • 이호택
    • 유통과학연구
    • /
    • 제14권6호
    • /
    • pp.65-73
    • /
    • 2016
  • Purpose - Recently, the management conditions of small independent retailers are getting worse everyday as large-scale marts and franchised convenience stores are increasing. The objective of this research is to find out the antecedents and consequences of cooperation in voluntary chain in order to enhance small independent retailer's competitiveness. Voluntary chains, also called affiliation or symbol groups, or allied group represent a high market shared in some European countries like Italy, France, and Germany. Nevertheless, there are still limitations in this research from academic fields. Drawing from network theory, the author investigates the relationship between antecedent factors in voluntary chain cooperation, such as participation benefits, justice of compensation, and autonomy in voluntary chain, and relationship specific asset. The author also attempts to examine the relationship between the relationship specific asset and cooperation of voluntary chain member shop and cooperation and consequence factors of voluntary chain cooperation, such as efficiency, group cohesiveness, and long-term relationship. Research design, data, and methodology - The author presented conceptual framework integrating the major antecedents and consequences of voluntary chain cooperation. The data were collected from 174 independent small retailers who joined K-voluntary chain. K-voluntary chain consists of small independent retailers. In accordance with their status, each entrepreneur associated with the voluntary group can own one or more outlets and can be a part of the life and the decision-making process of the group. This participation is not based on company turnover or on the number of outlets, but based on a one member, one vote system. To verify the research model and test hypotheses, the author carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed model. The data were analyzed by using SPSS 18.0 and AMOS structural equation modeling program. Results - The results of this study are as follows. First, as antecedent variables, participation benefits and justice of compensation have positive effect on the relationship specific assets of voluntary chain members. Second, voluntary chain members' relationship specific asset also directly related to the level of its cooperation to chain headquarter. Third, cooperation of voluntary chain member shop facilitates efficiency, group cohesiveness, and long-term relationship. Unexpectedly, there are no effect autonomy in voluntary chain to relationship specific asset. Conclusions - This research shows several theoretical and practical implications to both marketing scholars and marketers. In terms of theoretical implications, this study applies to network theory and network theory variables to explain the antecedent and consequence factors of cooperation in voluntary chain. From the point of view from business management, most of all, this study shows the way how to reinforce competitiveness of voluntary chain. Specifically, it is necessary for voluntary chain headquarter to give higher level of participation benefit and justice of compensation to its members. Second, the results also indicate what the consequence factors of cooperation in voluntary chain. In other words, to increase the level of marketing efficiency, group cohesiveness, long-term orientation in retail voluntary chain, and chain headquarter need to facilitate participants' cooperation.

유닛모듈러 건축구조물의 수평 정밀도 확보를 위한 Pre-Fab 독립기초 높이조절 공법 개발 (Development of a Height Adjustment Method of Prefabricated Individual Footing for the Leveling of Unit Modular Structural System)

  • 전영훈;김균태;채명진
    • 한국건축시공학회지
    • /
    • 제15권6호
    • /
    • pp.631-639
    • /
    • 2015
  • 유닛모듈러 공법에서는 정밀 제작된 유닛모듈과 시공정밀도가 낮은 기초부의 접합부에서 수평 정밀도 차이가 발생한다. 이러한 정밀도 차이로 인하여 상부 유닛모듈이 뒤틀리거나, 간격이 벌어지는 등 다양한 문제가 야기될 수 있다. 이러한 배경에서 본 연구는 Pre-Fab 독립기초의 높이조절이 가능한 공법을 개발하는 것을 목적으로 하였다. 이를 위하여 본 연구에서는 볼트와 너트를 이용한 높이조절 공법을 제안하고 시공 상세도와 시공순서를 제시하였다. 그리고 구조 시뮬레이션을 수행하여 구조적 안정성을 확인하였다. 향후 개발된 높이조절 공법의 mock-up 시험, 경제성 분석 등을 실시하여 시공성과 유용성을 검토할 예정이다.

단원(檀園) 김홍도(金弘道)의 풍속화첩(風俗畵帖)에 나타난 서민복식(庶民服飾) 연구 (A Study on the Civil Costume in Genre of Hong-Do Kim)

  • 조오순
    • 패션비즈니스
    • /
    • 제4권3호
    • /
    • pp.91-102
    • /
    • 2000
  • As an economy approach new state of affairs under the influence of the Shil-Hak philosophy, the Joshun society at 18th century gave common people to a chance to impress and to patronize the Arts. This social environment made an artist to drawing see and feel, this is a genre picture. Hong Do Kim(1745-1816 or 1818) was a typical genre picturer of Joshun, his picture reflected the time truthly and honestly and described vividly a life of common people, so expressed Realism what based on the actual. Therefore the purpose of this study is to analyze and to study costume of common people and their life style. The costume in a genre picture books are summarized. Man's basic dresses were Jugori and Baji uniformity, but based on the job or situation those had a little variation. People of a blacksmith shop wore that to enlarge sleeve of Bagi and Jugori and wore Strow Sandle exactly, in that way prepared for danger of treating hot iron. On the side, in the summer, Soikojambangiee and Deungguri jucksam wore at grain. The majority of hair style was Minsangtoo that Manggun not to be surrounded a head. Womam's basic dresses were Chima and Jugori, it was not to be different in compare with a woman of the aristocratic class, extremely appeal simplicity. But it was not to be of no accent on fashion even if common people, they wore a shot Dangko jugori that busts were seen below Jugori. A hair style was simple hair that her braid placed aboved a head, different with very richful hair style, Gachae that one‘s braid hair placed above a head, a hair style of woman of the aristocratic class and Kinuer. Because of common people's costume are not a special thing expect for basic dress-Jugori, Baji, Chima, many historical books or articles about costume are not existed. As the results of this study on costume of common people's life, we found that basic dresses appeared to a various types based on the job and the situation.

  • PDF