• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2006

The purpose of this study was to evaluate normalized jerk according to shoes, slope, and velocity during walking. Eleven different test subjects used three different types of shoes (running shoes, mountain climbing boots, and elevated forefoot walking shoes) at various walking speeds(1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2, 2.11, 2.33m/sec) and gradients(0, 3, 6, 10 degrees) on a treadmill. Since there were concerns about using the elevated forefoot shoes on an incline, these shoes were not used on a gradient. Motion Analysis (Motion Analysis Corp. Santa Rosa, CA USA) was conducted with four Falcon high speed digital motion capture cameras. Utilizing the maximum smoothness theory, it was hypothesized that there would be differences in jerk according to shoe type, velocity, and slope. Furthermore, it was assumed that running shoes would have the lowest values for normalized jerk because subjects were most accustomed to wearing these shoes. The results demonstrated that elevated forefoot walking shoes had lowest value for normalized jerk at heel. In contrast, elevated forefoot walking shoes had greater normalized jerk at the center of mass at most walking speeds. For most gradients and walking speeds, hiking boots had smaller medio-lateral directional normalized jerk at ankle than running shoes. These results alluded to an inverse ratio for jerk at the heel and at the COM for all types of shoes. Furthermore, as velocity increased, medio-lateral jerk was reduced for all gradients in both hiking boots and running shoes. Due to the fragility of the ankle joint, elevated forefoot walking shoes could be recommended for walking on flat surfaces because they minimize instability at the heel. Although the elevated forefoot walking shoes have the highest levels of jerk at the COM, the structure of the pelvis and spine allows for greater compensatory movement than the ankle. This movement at the COM might even have a beneficial effect of activating the muscles in the back and abdomen more than other shoes. On inclines hiking boots would be recommended over running shoes because hiking boots demonstrated more medio-lateral stability on a gradient than running shoes. These results also demonstrate the usefulness of normalized jerk theory in analyzing the relationship between the body and shoes, walking velocity, and movement up a slope.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.1
• /
• pp.7-10
• /
• 1975

The catches of mackerel by monofilament and multifilament net were compared by means of $x^2$ and t-test method. In order to improve the netting twine of drift nets, 6 shoots 5 different mesh and nylon-monofilament netting twines $(B\times2,\;C\;D,\;F,)$ and 2 shoe nylon-multifilament $(A\times2)$ which are using near the Jeju Island in contemporary days were used for the experiment. These gill no were connected in order of A, ,B, C, A, B, E, F and operated fly fishing boat Taeann Ho (7T) near sea of Jeju Ialand from May 1974 to August 1974. The results obtained are as follows: 1. B type nylon-monofilament gill nets were superior to nylon-multifilament gill nets in catch according to the result of $X^2$ test and t-test, and the catch ratio was $M_A:\;M_B=1:1.8$. 2. 75mm mesh size C, D nylon-monofilament gill nets were superior to 85mm mesh size nylonmonofilament gill nets, and their catch ratio were E, F: C, D=1:2.8. 3. The catch ratio C, D and E, F type nets were compared by means of t-teat, however could not recognized their relationship.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.112-118
• /
• 2004

Recently, development of rare earth permanent magnet with the high remanence, high coercivity allows the design of brushless motors with very high efficiency over a wide speed range. Cogging torque is produced in a permanent magnet by magnetic attraction between the rotor mounted permanent magnet and the stator teeth. It is an undesired effect that contributes to output ripple, vibration, and noise of machine. This cogging torque can be reduced by variation of magnet arc length, airgap length, magnet thickness, shifting the magnetic pole and varying the radial shoe depth and etc. In this paper, some airgap length and magnet arc that reduce cogging torque are found by finite element method(FEM) and Maxwell stress tensor method. The SPM(Surface Permanent Magnet) type of high-power Brushless DC (BLDC) motor is optimized as a sample model.

• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.31-44
• /
• 1995

The puppose of this study is to propose the numerical modelling criteria for underground opening, rock mass continuum is regarded as homogeneous rock behaved linear elastic. The results of this study are summarized as follows: - Boundaries of the finite element mesh should be located at least 6 radii away from the center of the opening. - For circular openings, tension only developed when $K_0$ was less than one-fourAs the ratio of initial horiwntal to vertical stress increased, the inward springline movement increased and the inward crown movement decreased. - The displacement patterns developing for opening I shaped horse-shoe and opening II shaped powerstation are similar to those for circular openings. For both type opening I and opening II, stress concentrations develop at the intersection of the wall and floor. Greater stress concentrations are found for the type opening II.

• Science of Emotion and Sensibility
• /
• v.18 no.1
• /
• pp.39-48
• /
• 2015

It is known that P300-based concealed information test (P300 CIT) was not greatly affected by the traditional countermeasures. This study was to test whether P300 CIT is affected by the new countermeasures. We used three types of countermeasures. First type was a sequential countermeasure in which participants had to respond in alternating ways to irrelevants by pressing the left index finger covertly when the encountered irrelevant firstly, by wiggling the right big toe inside the shoe when encountered irrelevant secondly, by imaging his or her mother's name when encountered irrelevant thirdly, and by imaging his or her father's name when encountered irrelevant fourthly until all stimuli were presented. Second type was a partial matching and physical countermeasure. Participants in this type were asked to press the left index finger imperceptibly after one of the irrelevants and wiggle the right big toe after another of the irrelevants. Third type was a partial matching and mental countermeasure. Participants were required to imagine mother's name for one irrelevant and father's name for another irrelevant. The results showed that contrary to our expectation, the use of sequential countermeasure increased the detection rate from 77% to 92%. The partial matching countermeasure had a negative effect on P300 CIT. The physical countermeasure decreased the detection rate from 77% to 46%, and the mental countermeasure decreased the detection rate from 100% to 69%. The necessity for the development of methods to prevent or detect countermeasure is discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.191-200
• /
• 2016

The ventilation effect of a ventilation system, which is classified as the forced ventilation and natural ventilation, is predominantly dependent on the combination of air supply and discharge. Perhaps the simplest ventilation is merely supplying the air as it is. However, to improve the indoor working environment during the summer, an air supply that is cooled to some extent has been widely adopted. Recently, a cooling method utilizing the vaporization of water was introduced. In this study, the performance of an evaporation-type air supply unit that was produced by Japan K-company and was installed in a shoe-manufacturing plant in Busan was investigated. The purpose of the experiment was to measure how much the supplied air could be cooled. From this experimental study, we confirmed that the evaporation-type air supply system is efficient, capable of improving the working environment during the summer while minimizing the energy cost.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.2
• /
• pp.237-242
• /
• 2016

Objective: The purpose of this study was to compare the joint movements and muscle activities of novices according to pedal type (flat, clip, and cleat pedal). Method: Nine novice male subjects (age: $24.4{\pm}1.9years$, height: $1.77{\pm}0.05m$, weight: $72.4{\pm}7.6kg$, shoe size: $267.20{\pm}7.50mm$) participated in 3-minute, 60-rpm cycle pedaling tests with the same load and cadence. Each of the subject's saddle height was determined by the $155^{\circ}$ knee flexion angle when the pedal crank was at the 6 o'clock position ($25^{\circ}$ knee angle method). The muscle activities of the vastus lateralis, tibialis anterior, biceps femoris, and gastrocnemius medialis were compared by using electromyography during 4 pedaling phases (phase 1: $330{\sim}30^{\circ}$, phase 2: $30{\sim}150^{\circ}$, phase 3: $150{\sim}210^{\circ}$, and phase 4: $210{\sim}330^{\circ}$). Results: The knee joint movement (range of motion) and maximum dorsiflexion angle of the ankle joint with the flat pedal were larger than those of the clip and cleat pedals. The maximum plantarflexion timing with the flat and clip pedals was faster than that of the flat pedal. Electromyography revealed that the vastus lateralis muscle activity with the flat pedal was greater than that with the clip and cleat pedals. Conclusion: With the clip and cleat pedals, the joint movements were limited but the muscle activities were more effective than that with the flat pedal. The novice cannot benefit from the clip and cleat pedals regardless of their pull-up pedaling advantage. Therefore, the novice should perform the skilled pulling-up pedaling exercise in order to benefit from the clip and cleat pedals in terms of pedaling performance.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.85-91
• /
• 2017

PURPOSE: The purpose of this study was to compare muscle activation of the trunk and lower limbs of subjects wearing high-heeled or flat shoes while crossing over obstacles of different heights. METHODS: Twenty subjects participated in this study. While wearing high-heeled shoes (7 cm) or flat shoes (0 cm), the subjects were asked to cross over obstacles of different heights (10%, 20%, and 30% of their lower-limb length). Muscle activation of the trunk and lower limbs with the supported side while crossing over obstacles of different heights was measured using the electromyogram (Noraxon, DTS, Germany). Two-way repeated ANOVA was used to compare the muscle activation between high-heel shoes and flat shoes while crossing over obstacles of different heights. All statistical analyses were performed using SPSS ver. 21, and p-values less than .05 were used to identify significant differences. RESULTS: As an obstacle's height increased, muscle activation of the trunk and lower limbs with the supported side was increased while wearing either type of shoe, and it was generally higher while wearing high-heeled shoes. However, tibialis anterior muscle activity while wearing high-heeled shoes was lower than while wearing flat shoes. CONCLUSION: This study showed that muscle activation of the trunk and lower limbs was higher when subjects wore high-heeled shoes than when they wore flat shoes while crossing over obstacles of different heights. Therefore, high-heeled shoes can easily cause high muscle fatigue of the trunk and lower limbs, and the TA muscle may weaken in persons who wear high-heeled shoes.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.34-42
• /
• 2015

This research is about shared living facilities for the solitary elderly in Gyeonggi province (so called "Carnation House"), which was opened after 2013. These facilities aim to help solving the social problems of the growing number of the solitary elderly. The research was conducted from April 2014 to October 2014 by using observation, measurement, photography, and interview methods. This research reviewed floor plan, area, accessibility, visual openness, and furniture and equipments. The results are as follows: First, considering the need for rest area and the protection of privacy, livingroom should at least be equipped with a variable wall or have a separate room. Secondly, for the kitchen plan, considering the fact that large number of people move simultaneously, kitchen entrance should be widened or LDK type is preferable. Thirdly, the bathroom entrance should be widened to at least 800mm and should have barrier free design. Fourthly, porch entrance should be planned to secure enough space and shoe cabinets for multiple users. Fifthly, to allow the users to enjoy outside view, the windows of living spaces should be placed no higher than 800mm from the floor level. Finally, for the location of the facility, people prefer the location be at the center of the village or near home. In addition, location with easy accessibility for the elderly is advisable. Therefore, establishing local guidelines for shared living facilities for the solitary elderly is advisable. When establishing local guidelines, local characters, culture and usage patterns should be considered.

• Korean Institute of Interior Design Journal
• /
• v.22 no.3
• /
• pp.11-21
• /
• 2013

Senior centers in apartment complex have been provided since 1980 according to the Housing Act in Korea. Nowadays these senior centers are model leisure facility for the elderly. However there are no specific guidelines for space composition and usage in a senior center. This study examines the space composition and usage patterns of 16 senior centers in apartment complex, Jangyou New Town. The data were collected by means of an observation, measuring, and interviews. The results are ; 1) A senior center consisted of one living room and two rooms for men and women would be appropriate; A living room is for common activities and two rooms for casual resting of each gender. 2) A kitchen is mainly used for setting the table or making tea. Thus, the living-dining-kitchen type would be appropriate. 3) Many rest rooms are located outside of a senior center and unisex one. The restroom should be separated by gender and located within the senior center. Also, the width of all doors should be more than 80cm and the floor be flat. The grab bars should be installed near the fixtures in a restroom. 4) Design and location of the shoe shelf are not convenient for the elderly to use. It should be designed and arranged for the elderly to use conveniently. Also, space for canes, walkers or wheelchairs should be considered in entrance area.