• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.378-385
• /
• 2020

The purpose of this study was to present basic data for development of shoe last suitable for women of plus size (BMI 25 kg/㎡ or higher) by type and to analyze the characteristics of each type of foot type. The results of the study are as follows. A comparison of the feet of a plus-size woman and a normal-weight woman showed that the feet of a plussize woman were thicker and wider in the toes, cheeks and feet than those of a normal-weight woman, while the ankle area was thicker. As a result of the cluster analysis by type of foot type of plus-size woman, type 1 was classified into four types, type 1 was 49 (19.5%), type 2 was 43 (17.1%), type 3 was 53 (21.1%), and type 4 was distributed among 106 (42.2%). Type 1 appeared to be a long, low heel, thick foot and wide H-type, and Type 2 appeared to be a D-type with a low heel and a thinner and narrow foot compared to other types, but with wide outer width of the foot. Type 3 showed short feet, low heels, narrow feet, but slanted sides, and Type 4 showed type A with long feet, high heels, thick and wide feet or a combination of toes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.2 s.161
• /
• pp.258-268
• /
• 2007

The purpose of this research is to develop functional midsole that can restrain the heightening of plantar pressure in forefoot pressure so as to develop high-heeled shoes that can lessen foot ailments among women. The pumps shoes used for the research were of the same pumps type last. The variant was heel height, 3cm, 6cm, and 9cm, and the shoes were made in both normal midsole and functional midsole. The variant was applied to investigate the changes of foot pressure on forefoot and hindfoot according to heel height.'Heel Cup' was chosen for modification of functional midsolepumps type. to enlarge contact area in hindfoot, and 'Heel Posting Pad' was attached under sustentaculum tali to suppress the weight moving to forefoot pressure. If such functional parts are developed and used, it is possible to lessen the amount of Pmax or Impulse imposed by high-heeled pumps type on forefoot pressure. This can greatly lessen foot ailments, largely caused by high-heeled shoes, among women.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.85-103
• /
• 2004

This study was conducted to determine what effects would the midsole hardness of running shoes have on shoe flex angle and maximum propulsive force. Furthermore, the relationship between the shoes flex angle and maximum propulsive force was elucidated in order to provide basic data for developing running shoes to improve sports performances and prevent injuries. The subjects employed in the study were 10 college students majoring in physical education who did not have lower limbs injuries for the last one year and whose running pattern was rearfoot strike pattern of normal foot. The shoes used in this study had 3different hardness, shore A 40(soft), 50(medium) and 60(hard). The subjects were asked to run at a speed of $4{\pm}0.08m/sec$, and their movements were videotaped with 2 S-VHS video-cameras and measured with a force platform. And the following results were obtained after analyzing and comparing the variables. 1. Although the minimum angle of shoes flex angle was estimated to appear at SFA4, it appeared at SFA2 except in those shoes with the hardness of 40. 2. The minimum angle of shoes flex angle was $145.1^{\circ}$ with barefoot. Among the shoes with different hardness, it was the smallest when the hardness was 50 at $149.9^{\circ}$. The time to the minimum angle was 70.7% of the total ground contact time. 3. Maximum propulsive force according to midsole hardness was the largest when the hardness was 50 at $1913.9{\pm}184.3N$. There was a low correlation between maximum propulsive force and shoes flex angle.

• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.167-177
• /
• 1982

This study was undertaken to observe relationships between patterns of feeding, supplementary-feeding and various maternal, family, and socioeconomic charactereistics in Hae Cheog Apartment area in Cheongdam-dong, Kangnamku, Seoul on July 2 to 12 in 1982. The results were based on a questionnaire from 179 mothers who have the last-born child under two years old. Results were as follows: 1) In socio-demographic characteristics, most of mothers were 25 to 30 years old and 52.0% of index children were under 6 months old. About 56.0% of families were the salaries and 47.0% of them earn over 500,000 won a month. 40.8% of mothers were college graduates and 81.6% of mothers had no occupation. 2) 89.4% of mothers received prenatal care in pregnancy of the index children and mothers who have delivered the child in medical institute were 88.3%. Mothers who recieved education of breast care and feeding technique through prenatal care were 22.4%, 31.8% respectively. 3) In the feeding method, 44.1% of mothers took the breast feeding, 24.0% of them chose the artificial feeding, and 20.7% of them chose the mixed feeding. Mothers who changed the-method from breast feeding to artificial feeding were 10.6% and only 0.6% of mothers changed from artificial feeding to breast feeding. 4) According to the questionnaire, 37 mothers have already finished lactation (no relation with. the beginning of weaning food). In breast feeding, one mother has lactated for $4{\sim}6$ months, one has lactated for $7{\sim}9$ months, four have lactated for $10{\sim}12$ months, and seven have. continued the lactation over 12 months. In artificial and mixed feeding, as the same phenomenon, most of mothers have lactated for more than 12 months. 5) The reasons for feeding method were as follows: In breast feeding, 64.6% of them took the method because they thought the breast milk nutrious, in artificial feeding, 34.9% of them chose it because they had occupation and in the mixed feeding, 67.6% of mothers took the method because of lack of their breast milk. In the case of changing the method from breast feeding to artificial feeding, 42.1% of them answered that they had to change the method because of lack of breast milk. 6) In most of cases, the 4th month was the proper period to begin the weaning food and 32.5% of breast feeding children and 27.6% of artificial feeding children began the weaning food in 4th month. After 4th month, there was no difference between breast feeding and artificial feeding in the beginning of weaning food. 7) In the matter of menstruation, 29.8% of mothers who had breast feeding started their menstruations in 3 months and the rest of them delayed until 12 months. 40% of mothers who had artificial feeding began to menstruate after 2 months and all the rest started within 5 months. 8) The birth interval between the index child and next new child (would-be-born): In breast feeding, the interval of $18{\sim}24$ months had a majority as 50.0%, and in the artificial feeding, the interval of over 24 months marked 66.7% of them. It was analyzed that the birth interval of artificial feeding was wider than that of breast feeding. 9) In the desirable number of children, the mothers who had breast feeding wanted two sons and two daughters as proper children. Those who want two children in disregard of the sex (son or daughter) were 89.3% of breast feeding, and 80.0% of artificial feeding respectively. Mothers who had breast feeding wanted two children rather than one child. 10) In the family planning practice, the rate of practice were 41.9% in breast feeding, and 58.1% in artificial feeding respectively. In the case of breast feeding, the using rate of family planning practice in men was higher than in women.