• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1309-1314
• /
• 2008

I.G.G is abbreviation for Inert Gas Generator, High temperature in Cargo Tank it desulfurize, exhausted and froze the gas that combined brimstone element and soot, then supply Inert gas by blower, and mack tank inside incombustible range this is equipment that nip in the bud the explosion. The blower for suppling inactivated gas has big impeller with heavy weight to achieve the high pressure, it causes a delay for first operation time and too much load is delivered to motor, total destruction by fire of motor is happening frequently. On this research, we will reduce the size & weight of impeller and install it with several stage, it makes an effect for reducing the first operation time. We also intend to contribute to efficient IGG blower design by research a flowing & pressure specialty from the diameter of impeller, number of blade, and size of casing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.375-380
• /
• 2012

In this study, dynamic load and dynamic contact force between a building block and wire ropes of a goliath crane are calculated during lifting or turn-over of a building block for the design of an optimal lug arrangement system. In addition, a multibody dynamics kernel for implementing the system were developed. In the multibody dynamics kernel, the equations of motion are constructed using recursive formulation. To evaluate the applicability of the developed kernels, the interferences and dynamic contact force between the building block and wire ropes were calculated and then the hull structural analysis for the block was performed using the calculation result.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.5
• /
• pp.435-446
• /
• 2016

In this study, hydrodynamic and mooring analysis for LNG FSRU moored by an internal turret with 9 mooring lines are numerically performed using commercial softwares, Hydrostar and Ariane. Met-ocean combinations for screening method are taken from wave governed condition(BV Rule Note NR 493) with relative heading between wave and wind between −45° and +45° and relative heading between wind and current between −30° and +30°. Extreme mooring analysis and sensitivity analysis are performed for intact and damaged (=one line missing) conditions and the parameters for sensitivity analysis are wave peak period, peak enhancement factor and line pretension. In the viewpoint of the design tension in mooring line, chain diameter is designed to satisfy safety factor for each conditions. As the chain diameter is increased from 152mm to 171mm, the designtension is reduced while the minimum breaking load is increased.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.122-129
• /
• 1988

Recently with the rapid development in marine and shipbuliding industries such as marine structures, ship and chemical plants, there occurs much interest in the study of corrosion fatigue characteristics which was closed up an important role in mechanical design. In this study, the 5086 Al-alloy was tested by use of rotary bending fatigue tester. The retardation effect of overload on the corrosion fatigue crack propagation in sea environment was quantitatively studied. 1) Retardation effect of corrosion fatigue crack propagation is most eminent when overload ratio is 1.52, overload magnitude corresponds to about 77% and 55% of yield strength and tensile strength respectively. 2) After overload ratio 1.52 was used, retardation of corrosion fatigue crack growth rate is largely retarded and quasi-threshold stress intensity factor range($\Delta\textrm{K}_{th}$) appears. 3) According to m of experimental constant, retardation effect of corrosion fatigue crack propagation corresponds to about 25% of constant stress amplitude when overload ratio is 1.52. 4) When overload ratio 1.52 was used, retardation parameter (RP) decreases to about 0.43 and corrosion sensitivity (S)decreses to about 2.1.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.411-417
• /
• 2015

The shipping and shipbuilding industries have had business difficulties since the implementation of regulations on the CO₂ emissions from ships by IMO and the occurrence of the global financial crisis in 2008. Under this global recession, most shipping firms have started to operate their fleets at slow steaming rates with the goal of improving the profit ratio per transported unit. This study analyzed the resistance performance of a 6,800 TEU container ship corresponding to its trim variation with slow steaming, compared with that at its original design speed. Two different grid systems were used for the numerical calculation, one that considered the free surface allowing the capture of the dynamic trim and one that did not. This made it possible to clearly classify each resistance component to provide useful information to hull-form designers. In addition, a form factor assumption method using CFD was used for a reasonable effective power prediction in compliance with the 1978 ITTC performance prediction method. It was found that the total resistance of a 6,800 TEU container ship was reduced by 2.6% in the case of a 1-m trim at the bow at 18 kn.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.47-57
• /
• 2008

Many accidents occur on the oceans. Accidents involving ships can cause enormous damage. When an accident occurs, the cost of environmental restoration can bankrupt even a top-ranked international company. The potential damages resulting from ship accidents have resulted in many international agreements such as MARPOL, SOLAS, ISM Code, etc. The viability of damaged ships has become more and more important. A damaged ship's viability and cargo safety can be improved by a safety assessment design procedure. We consider th￡ shipbuilding industry's distributed characteristics to define a safety assessment system with software engineering-based requirements analysis. We used a distributed network-based simulation method (HLA - High level architecture), because of ease of reuse and expansion of existing components to other situations, and because it is a military standard. HLA is the standard for distributed network-based simulation in many countries including the United States, Canada, Israel, and Korea. The paper describes research to develop a prototype of a network-based safety assessment simulation system by software engineering based analysis.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.157-162
• /
• 2012

A planing craft is designed specifically to achieve comparatively high speed on the surface of the water. The frictional resistance of planing craft can be reduced further by injecting air to the craft's bottom. In this paper, the resistance characteristics of high speed planing crafts with & without air injection at the bottom were compared by sea model-test method. As a result, we conformed that planing craft with air injection has much greater the effect of resistance reduction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.281-283
• /
• 2016

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper is prepared in the main control board to support the industrial communication protocol conversion, control, and monitoring. The industrial communication gateway module is also designed to ensure that the protocol conversion of CAN bus and Ethernet. The main board processor is used the Atmega2560, and placed 4ea RS485 serial slots for sub-board. One of them is used for communication CAN bus and Ethernet. It provides analog and digital I / O through each of the slots is used for control and monitoring.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.81-85
• /
• 2009

Work related musculoskeletal disorders(WMSDs) was a leading cause of sick leave and injuries in the industries of our country. Posture was an important consideration in the design of work method and workplaces, because it affected the ability of workers to use various equipments and influenced how long they could perform their job without feeling discomfort, fatigue, and musculoskeletal disorders. Imbalanced lower limb postures such as a squatting posture were awkward working postures common to the shipbuilding shops, farms, automobiles assembly lines in our country. Different awkward working postures were known to be associated with specific musculoskeletal disorders. Eight postures in lower limb postures divided into balanced and imbalanced postures were evaluated by electromyographic(EMG) activity for lower limb muscles. Twelve male subjects participated in this study. This paper was to analyze the effects of lower limb muscles workload according to lower limb postures(knee angle) and working time. The ANOVA results showed that most EMG root mean square(RMS) values were statistically significant effect according to lower limb postures(knee angle) and working time. Therefore, the results of this study will provide the basis to evaluate workload of lower limb postures correctly adopted by workers in various jobs and the ergonomic reference to prevent WMSDs.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.26-33
• /
• 2014

In this study, Non-load-carrying EH Grade steels in fillet welded joints were evaluated with both the hot spot stress method and the 1mm stress method. The thickness effect criterion for fatigue strength evaluation of welded of welded steel structures recommendations of the IIW was used to evaluate the fatigue strength of EH40 and EH36 and Both EH40 and EH36 have been compared with FAT 125 curve recommended in the IIW. Furthermore, fatigue strength of the welded tow and the ground conditions for Non-load-carrying EH36 based on the 1mm stress method has been discussed.