• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.64-69
• /
• 2003

This paper describes a study on the tearing damage of the ship's bottom plating during a grounding. It has been known widely that difference scaling laws are applied for bodies undergoing simultaneously plastic flow and crack propagation in the deformation of the plate tearing. Especially, the basic scaling law is not followed for the fracture. In this study plate cutting experiments for the geometrically similar models have been performed in order to verify the problem. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models the damage become large. A simplified analytical method for the estimation of tearing is proposed based on the experiments and it has been observed that the results of the present formula are correlated very well with the experiments

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.108-112
• /
• 2011

When oil spills occur in the ocean because of a ship collision or grounding, the oil in the sea will spread to the coastline. To effectively and promptly prevent such an oil spread, the prediction of the direction and speed of the spreading oil must be made. By applying the coastal wave diffusion theory with a consideration of the effects of wind and current, the oil spreading direction and speed can be predicted promptly so that the National Disaster Prevention System can effectively and promptly take countermeasures against the attack and contamination of the coastline by such oil bands.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.41-46
• /
• 2004

This paper describes a study on the tearing damage of a ship's bottom plating, during a grounding. It is widely known that different scaling laws are applied for bodies undergoing simultaneous plastic flow and crack propagation in the deformation of plate tearing. Specifically, the basic scaling law is not followed for the fracture. In this study, in order to verify the problem, plate cutting experiments for geometrically similar models have been performed. From the experimental results, it has been observed that the cutting forces and energy for the larger models are significantly lower than those of the smaller models. A simplified analytical method for the estimation of tearing is proposed, based on the experiments. It has been observed that the results of the present formula are highly correlated with the experiments.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.203-209
• /
• 2006

Maritime transport has been occupying the biggest part of the container transportation market. With regard to container terminal management, the planning technology and the space allocation system on the yard are very significant factors to secure the stability of ship and to ensure the reliability of schedules of ship throughout keeping barycenter of vessel by right loading and fast handling of cargoes. The purposes of this paper are to illustrate the existing yard management systems such as Grouping method and Random Grounding method, and then to evaluate and compare the efficiency of yard availability between the existing management system(Grouping method) and Random Grouping which uses the forecasted inbound cargo volume at the gate by Time Base Operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.558-561
• /
• 2018

Human errors have known as a majority of maritime navigational accidents such as collision and grounding. A large number of relevant research applied indirect research methods such as survey and interview. The research methods are limited to collect objective data regarding human errors due to its nature. Therefore, the purpose of this study is to improve the limitation of human error measurement of navigators by applying wearable sensors. Infrared sensors by using a 3-D printer to accommodate the special environment of a ship were developed for the study. As results, a significant reliance on the Integrated Navigation System including Electronic Chart Display and Information System (ECDIS) and Radar. The results are expected to motivate further research to investigate human errors of ship navigators to reduce the maritime navigational accidents.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.6
• /
• pp.480-487
• /
• 2019

Ship route planning is to find a route to minimize voyage time and/or fuel consumption in a given sea state. Unlike previous studies, this study proposes an optimization method for the route planning to avoid the grounding risk near the coast. The route waypoints were searched using A^* algorithm, and the route simplification was performed to remove redundant waypoints using Douglas-Peucker algorithm. The optimization was performed to minimize fuel consumption by setting the optimization design parameters to the engine rpm. The sea state factors such as wind, wave, and current are also considered for route planning. We propose the constraint to avoid ground risk by using under keel clearance obtained from electoronic navigational chart. The proposed method was applied to find the optimal route between Mokpo and Jeju. The result showed that the proposed method suggests the optimal route that minimizes fuel consumption.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.119-129
• /
• 1994

The aim of the present study is to derive an empirical formula relating the absorbed energy and the cutting length for longitudinally stiffened steel palates which are cut by a wedge, idealizing the ship bottom stiffened platings in groundings. This study is based on the test results and the investigations of some parameters affecting the cutting response, described in Part I. By dimensionless ana1ysis of the test results obtained in a quasi-static loading condition, the energy absorbed while a longitudinally stiffened plate is cut by a wedge is expressed as functions of the cutting length, the yield stress, the equivalent plate thickness and the wedge angle. Also, the dynamic effects are incorporated into the static formula such that the proposed formula can be applied to the impact loading situations. The validity of the proposed formula is checked by comparing with the results obtained by the other existing formulas or by the drop-hammer tests.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.481-489
• /
• 2004

Ship collisions and grounding continue to occur regardless of continuous efforts to prevent such accidents. With the increasing demand for safety at sea and for protection of the environment, it is of crucial importance to be able to reduce the probability of accidents, assess their consequences and ultimately minimize or prevent potential damages to the ships and the marine environment. Numerical simulations for actual collision problem are conducted with a special attention with respect to finite element size, fracture criteria and material properties, which require a careful consideration to improve the accuracy. A parametric analysis varying colliding speed, angle, design loading condition is conducted using nonlinear finite element analysis method for 46,00 dwt Product/chemical carrier. The relationship between the absorbed energy and indentation are derived quantitatively using the insights observed from this study, and a novel design concept for assessing the anti-collision performance are proposed.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.823-827
• /
• 2011

The present Common Structural Rules for double hull oil tanker is not included the residual strength, which is one of the functional requirements in design part of Goal-based new ship construction standards (GBS). The GBS will be enforced after July 1, 2016. The requirement related residual strength has the goal to build safe ship even if she has the specified damages due to marine accidents including collision and grounding. In order to assess the residual strength based on risk for structural damages according to GBS, tons of nonlinear FE analysis work taking into account various types of damage will be needed. The Smith's method, a kind of simplified method for the strength analysis is very useful for this purpose. In this paper, the residual strength assessments based on ultimate strength using Smith's method were carried out. The objected ship is VLCC with stranding damage in bottom structures. Also, the results were compared with that of nonlinear FE analysis using three cargo hold model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.603-612
• /
• 2017

Accidents associated with hazardous materials, including oil and HNS, in maritime transportation show increasing trend. Therefore, preventive countermeasures for such accidents should be provided. The purpose of this study is to analyze level of risk on human loss and potential damage to environment, using data on domestic marine accidents carrying hazardous materials (2002~2014), and identify high-risk accident types for urgent risk management which needs findings of accident causes and proper mitigation measures. High-risks on human loss are explosion and suffocation, occurred in process of ship maintenance and tank cleaning. On the other hand, high-risk on environmental damage is spill caused by ship accidents (collision, grounding and etc.). Especially, spill occurs during loading operation of oil and HNS onboard a ship. Strict operation supervision/management and safety education/training on a regular basis could prevent accidents, because human factors such as not wearing safety gear and careless cargo handling cause most of the marine accidents.