• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.57-62
• /
• 2004

A mariner feels the ship-handling difficulty when the vessel onboard passes through breakwater. Until now, there is no a layout design of breakwater to take into account the ship-handling difficulty for the mariner. 11Us paper reproduced this situation which ship-handling is difficult by using marine traffic flow simulation, and it applied to Environmental Stress Model as the assessment model which is a quantitative model for evaluating the difficulty of ship-handling arising from restriction in maneuvering water areas and arising from traffic congestion The results are as follows. (1) The layout change of breakwater has little influence for reduction of ship-handling difficulty in the areas of vessel traffic volume. (2) In the situation of same breakwater width, difference of ship speed has an effect on decrease of ship-handling difficulty. (3) Expansion of breakwater width decreases ship-handling difficulty quantitatively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.57-63
• /
• 2003

Marine traffic system is composed of ship, ship's operators and traffic environment The navigation channel is a part of traffic environment and the design of channel is a crucial factor for safe navigation This paper aims to evaluate ship-handling difficulty in straight and bend channels with an Environmental Stress model(ES-model). The ES-model is used to evaluate ship handling difficulty quantitatively on the basis of the ship operator's subjective judgement for safety in navigation The calculation of ES value was made on the basis of three factors such as channel width, ship's length and speed in straight and channels for safe navigation. The interrelation between factors was analyzed and reasonable design standards of channel width, ship's length and speed were proposed for safe navigation of ship in bend channel.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.101-106
• /
• 2012

Ship handling simulator is a virtual ship navigating system with three dimensional screen system and simulation programs. FTS simulation can produce theoretically infinite experiment tests without time constraint, but which results in collecting determinstic observations. RTS simulation can collect statistical observations but has disadvantage of spending at least 30 minutes for a single experiment. The previous studies suggested that the number of experiment conditions to be tested could be reduced to obtain random data with RTS simulation by focusing on highly difficult experiment condition for ship handling. It has the limitation of not estimating the distribution of ship handling difficulty for the route. In this paper, similarity and clustering analysis are suggested for reduction methodology of experiment conditions. Similarity of experiment conditions are measured as follows: euclidean distance of ship handling difficulty index and correlation matrix of distance differences from the designed route. Clustering analysis and multi-dimensional scaling are applied to classify experiment conditions with measured similarity into reducing the number of RTS simulation conditions. An empirical result on Dangin harbor is shown and discussed.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.661-667
• /
• 2003

There are certain guidelines on the channel design such as domestic guidelines（Korean and japanese, etc.）and international guideline known as PIANC Rules（Permanent International Association of Navigation Congresses Rules）, in the world These rules have considered many factors such as natural conditions, ship maneuverability and geographical features etc. But it is contented toot the area of these rules toot are meant to facilitate the ease of ship-handling is insufficient. To satisfy this point in design process, it is necessary to take into account the difficulties encountered in ship-handling within these inland waterways. Because many vessels are navigating at the same time within these waterways, the specific navigable traffic volume should be considered with regard to the standard process of route designing. It must also be considered with regard to the volume of navigable traffic bemuse of ship-handling difficulty toot arises within the same waterway with varying amounts of traffic volume because toot ship-handling/manueverability is directly influenced by these factors. This paper aims to propose a new approach to the design of standard inland water route considering the traffic volume and the shape of waterway. Also consider the relationship among these factors may affect to the ship-handling difficulties.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.311-316
• /
• 2004

In order to secure the traffic safety especially in the entrance waterway of harbour, it is important that the breakwater and the port facilities should be designed properly considering ship-handling difficulty and traffic flow. In this study, the lateral force acting on ship hull under the external force(wind, current, wave) is investigated quantitatively for the container ship approaching to the Busan and Gamcheon breakwater. The relation of ship-handling difficulty to the breakwater and the arrangement of ship's routine are examined based on the lateral force under the external force. Some of reviews to secure traffic safety on the design of breakwater are discussed.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.207-213
• /
• 2008

Ship-handling simulation system has been used for maritime traffic safety assessment for harbor and fairway. There exist various environmental conditions under which ship may navigate along a fairway or in harbor. Due to the time and budget limitations, however, ship-handling simulations are usually carried out for very limited number of environmental conditions. In this paper, statistical method for effective and systematic determination of real time simulation conditions is suggested and applied to the maritime traffic safety assessment problems. In the empirical study, the principal component analysis method and the concept of empirical cumulative distribution function are suggested to estimate synthetic navigational difficulty and to select simulation conditions which would impose high difficulty on shiphandling.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.1-7
• /
• 2005

In order to secure the traffic safety especially in the entrance waterway of harbour, it is important that the breakwater and the port facilities should be designed properly considering ship-handling difficulty and traffic flow. In this study, the lateral force acting on ship hull under the external force(wind, current, wave) is investigated quantitatively for the container ship approaching to the Busan and Gamcheon breakwater. The relation of ship-handling difficulty to the breakwater and the arrangement of ship's routine are examined based on the lateral force under the external force. Some of reviews to secure traffic safety on the design of breakwater are discussed.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.46-50
• /
• 2008

The purpose of the present study was to investigate the mariner's information characteristics in ship-ta-ship collision situation using the full mission ship-handling simulator. Risk levels of ship-to-ship collision were manipulated by whether the target ship complies with the naval regulations and by movement patterns of target ship. Dependent variables reflecting mariner's information characteristics in ship-ta-ship collision situation were measured in terms of radar detection reaction time, free recall performance of past navigation situation, and subjective ratings for the task difficulty. The results showed that, in general, the mariners appeared to be deteriorated in their radar detection reaction time and free recall performance as the risk of ship-ta-ship collision increased. Also, the mariners tended to rate required tasks more difficult in the high risk ship-ta-ship collision situation.

• Journal of Navigation and Port Research
• /
• v.29 no.9
• /
• pp.777-782
• /
• 2005

Maritime transportation consists of various situations such as navigation in the ocean, ship handling at harbor entrances, cargo handling and mooring in harbors. Generally, ships are built for the purpose of currying people and materials upon the seas. In order to accomplish the mission, a ship must be built to withstand the rigors of heavy weather and waves. In particular, the safety of ship motions at the entering/departing harbor and mooring under the effects of waves is very important for ship operation from the viewpoint of marine engineering. Therefore, safety and efficiency during entrance, departure, and mooring are extremely important aspects in the evaluation of ship operations from viewpoints of ship motions. However, the ship motions near a harbor entrance are not observed or studied as much. In this paper, to evaluate the difficulty of ship operations, field observations were performed using a new observation system with high accuracy in typhoon seasons, and grasp was done concerning about the time series characteristic that ship motions change rapidly within a harbor. Namely, such observations enable the quantitative safety evaluation under the effects of waves during ships entering and departing harbors in heavy weather.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.85-93
• /
• 2005

In order to effective transportation of goods & smooth traffic in west sea area, it is a plan to build Pyeongtaek bridge. Basically ship-handling operators have a mental difficulty and hazardous for navigation under bridge which is constructed across on the fairway. Therefore this study aims to propose the traffic safety assessment of navigation under the bridge by using full mission ship-handling simulator and also investigate the bridge design regulations of certain countries on the fairway.