• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.199-201
• /
• 2016

항해장비의 성능이 고도화되고 있으나 해기사의 항해기기 운용능력, 즉 해양사고 저감을 위한 항해사의 위험 예견 능력과 회피의무의 중요성은 지속적으로 증대되고 있다. 이 능력과 의무는 항해사의 인지능력으로도 표현할 수 있다. 해기능력이 상이한 각 선교팀이 선박 조종시뮬레이터로 인명구조조선을 실시하여 나타난 선박의 항적을 기반으로 인지상황 발생 초기대응별 사례를 분석하고, 단계별 항적, ROT 값 등 분석 자료를 인지교육모델, 해기사의 상황인식평가 기초자료로 활용하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.347-360
• /
• 2014

The auto-berthing of a ship requires excellent control for safe accomplishment. Crabbing, which is the pure sway motion of a ship without surge velocity, can be used for this purpose. Crabbing is induced by a peculiar operation procedure known as the push-pull mode. When a ship is in the push-pull mode, an interacting force is induced by complex turbulent flow around the ship generated by the propellers and side thrusters. In this paper, three degrees of freedom equations of the motions of crabbing are derived. The equations are used to apply the adaptive backstepping control method to the auto-berthing controller of a cruise ship. The controller is capable of handling the system non-linearity and uncertainty of the berthing process. A control allocation algorithm for a ship equipped with two propellers and two side thrusters is also developed, the performance of which is validated by simulation of auto-berthing.

• 한국항만학회지
• /
• 제11권1호
• /
• pp.45-64
• /
• 1997

Ship's delay caused by port congestion has drawn attention to the necessity for analysis on overall operation in port. But, in order to analyze the complicated port operation which contains large number of variable factors, queueing theory is needed to be adopted, which is applicable to a large scale transportation including ship's arrival in a large port. In this paper, a simulation model for Inchon Port was developed by the software SIMAN V and presented congestion rate under a certain scenario regarding the arrival ship's number and service levels. To develop the simulation model, types of ships and cargoes during the 1995 in Inchon Port was analyzed in advance. The results of the simulation can be summarized as follows : In order to maintain present levels of congestion rate and time with the increasing number of arrival vessels, service rate should be increased at an exponential rate. To improve the current congestion effectively, part of cargoes are needed to be transferred to a newly developing port. Results obtained from simulation can be used properly to prepare improved service levels and to plan appropriate investment strategies.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.61-72
• /
• 1999

This paper presents an estimation method of container handling capacity and selection of resource allocation strategies of container terminals using the computer simulation models. Simulation models are developed to model container terminal consisting of 4 berths considering the berth allocation strategies, crane allocation strategies and the total number of container cranes using Arena simulation package. The proposed models do not consider the yard operations and gate operations. All the input parameters for the models are estimated on the basis of the existing container terminal operation data and the planning data for the automated container terminal planned by Korean government. Four berth allocation strategies and three crane allocation strategies are considered. The total number of container cranes considered ranges from 12 to 15. Non-terminating simulation techniques are utilized for the performance comparison among alternatives. The performance measures such as average ship turnaround time, average ship waiting time, average ship service time, the number of containers handled per year, and the number of ships processed per year are used. The result shows that the berth allocation strategy minimizing the sum of the number of ships waiting, the number of busy container cranes and number of ships handled performs better than any other berth allocation strategies. In addition, the crane allocation strategy allocating up to 5 container cranes per berth performs better than any other crane allocation strategies. Finally there are no significant performance differences among the alternatives consisting of different total number of container cranes allocated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.714-719
• /
• 2000

In this paper, an application program is made to simulate the behavior of a ship block under various crane works and to generate data of lu9 reactions and wire tensions. The program is based on a CAD program, Pro/ENGINEER. A ship is composed of more than 100 ship blocks. In order to lift, move, turn, or put a ship block at a convenient location fur assembling, workers in a shipyard use cranes, wires, and lugs temporarily attached to the block. In the procedure of lifting and turning a ship block with a crane, it is important to find suitable lug points and wires to do the handling efficiently and prevent accidents. Evaluation of forces in lugs and wires is necessary, but the problem is rather complex due to nonlinearity and nonuniqueness. In the present development, the nonlinear system of equations for quasi-static equilibriums is derived and a Newton type solution method is adopted to solve the system. The importance of initial estimates to the solution is illustrated and two approaches are utilized and compared. With the program developed, users can assign lug points on the CAD model by mouse and choose various linking devices at each crane point. Users can try to simulate the motion for any prescribed conditions, compare the motion of the block and the reactions and choose appropriate lug points and the type of wires and lugs.

• 한국항해항만학회지
• /
• 제39권6호
• /
• pp.465-472
• /
• 2015

선박온실가스 규제를 위한 SEEMP (Ship Energy Efficiency Management Plan) 기술 중 선박에너지절감을 위한 조치는 하드웨어적인 장비를 선박에 탑재하여 구현하거나, 인적교육 및 운항패턴 개선 등과 같은 소프트웨어적인 방식으로 구현 가능하다. 선체저항개선을 위한 기술 중 하드웨어적인 장비 개조를 통해 구현되는 기술은 현존선에 적용하는데 장비의 규모 등에 의한 제약이 발생한다. 반면 소프트웨어적인 에너지절감기술의 구현은 저렴한 도입비용과 하드웨어적인 방식에 비해 높은 에너지 절감효과를 보이며, 선종에 크게 구애받지 않고 적용이 용이하다는 장점을 가지고 있어 IT 기술을 이용한 선박에너지절감기술이 요구되어지고 있다. 본 논문에서는 IT 기반의 선박에너지절감 기술을 검증하기 위하여 대표적인 3개 선종에 대한 실선 모델링 기반의 선박조종시뮬레이터를 이용한 육상시험을 수행하였다. 시뮬레이터를 이용한 성능검증 방법은 6개의 다양한 환경조건에서 에너지절감기술 적용 전후의 운항결과로부터 에너지절감효과를 비교 분석하고, 해상상태에 따른 구간별 비교결과를 통해 IT기반 에너지절감시스템의 성능평가를 수행하였다. 벌크, 컨테이너, VLCC 선종을 이용한 육상시험 결과 컨테이너선의 연료절감률이 가장 크게 나타났고, 육상시험 대상선박 모두 선박에너지절감시스템 사용전과 비교하여 연료절감효과를 보였다.

• 수산해양교육연구
• /
• 제21권2호
• /
• pp.291-305
• /
• 2009

As you known well, Ulsan port is very famous for handling chemical products which occupies about 80% of quantities of all Korean ports. Many ship's operators prefer to handle liquid cargo es at proper anchorages instead of the berth for saving port expenses. Ulsan M-10 anchorage was assigned for handling liquid cargoes, however this anchorage's space is restricted by the oil pipeline which lays under seabed about 400m off from the center of M-10 anchorage, for which we have to consider of the external force and counter force for keeping the safety of anchoring. Where, external force is induced by wind, tidal currents and wave while counter force is induced by holding power of anchor/chain. In this study, author evaluated a method to analyze theoretically the limit of external force condition up to which an anchoring ship can keep her position without dragging, and for which applied to many kinds of combined Ships as mother ship of 50,000 DWT Tanker and 4 sizes of Tanker as alongsided ship.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.69-69
• /
• 2017

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.293-295
• /
• 2007

해상교량의 규모 결정을 위한 선박조종시뮬레이션 표준시행 조건 및 기법(대상선박 설정, 시나리오, 시행회수, 평가기법 등)을 정립함으로써 해상교량 통항 안전성을 평가하는데 정책 결정의 혼선을 최소화 할 필요가 있다. 본 연구에서는 과거 수행된 선박조종시뮬레이션 관련 보고서 분석 및 평가를 기초로 선박조종시뮬레이션 표준안에 대한 공통점을 도출하여, 국내 선박조종시뮬레이터 보유기관 항만 이용자 및 항만 건설 관계자 등의 의견 수렴과정을 거쳐 수정 보완함으로써 선박조종시뮬레이션의 대상선박, 수행 조건, 평가기법, 시나리오 설정 등에 대한 최종 표준안을 제시한다.

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.28-40
• /
• 2010

One of the most important objectives of the schedules in a container terminal is to minimize the ship operation time, which consists of discharging and loading operation times. Recently, dual cycling techniques have been used for improving terminal operations, especially for reducing the total empty trips of handling equipment. The main focus of this study is to reduce the empty trip times of yard trucks with minimum delays for ship operations. A heuristic algorithm, modified from a previous algorithm, is proposed to solve this problem. A simulation study is conducted to evaluate the effect of different types of discharging and loading schedules and different locating methods for discharging containers in terms of the performance of the system, including the percentage of the dual cycle operations of yard trucks.