• Journal of Ocean Engineering and Technology
• /
• 제23권4호
• /
• pp.38-46
• /
• 2009

Two sets of numerical simulations were carried out for a planing hull model ship. In the first, the WAVIS 1.4 linear and nonlinear potential solver was utilized with the free support condition, in which the running posture was determined during calculation. The linear and nonlinear potential calculation results showed qualitative agreement in the trim and resistance coefficient with the MOERI towing tank test. However, the nonlinear potential calculation gave better results than the linear method. In the next simulation, Fluent 6.3.26 with a VOF model and the WAVIS 1.4 nonlinear potential solver were used with the given running posture from the measurement carried out in the MOERI towing tank. Fluent with the VOF method had substantially better agreement with model test results than the results from the WAVIS nonlinear potential calculation for the total resistance coefficient, and for the bow and stern wave patterns, in spite of the much greater computational costs. Both methods can be utilized in planing hull design when their limitations are perceived, and the running posture should be predicted correctly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제10권11호
• /
• pp.1927-1933
• /
• 2006

This paper proposes the implementation plan of information network for an E-Navigation. Firstly, It configures to the network system based on E-Navigation information network using information and communication technology. And then, it builds on the total port network and tuning up the maritime traffic support system. It will expect to the efficiency through information network between ship to ship related pen operator. Building of information network for the E-Navigation, it is to build on the wireless internet infrastructure for the port logistics and traffic safety.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.62-68
• /
• 2010

The requirement of high efficiency and low emission for marine diesel engines are being enforced because of air pollution and climate change on the earth. In connection with these, many new technologies are considered. But they are mainly for new building ship. It is necessary to be concerned about the improvement of engine performance for existing ship. In this paper, the simulation program for performance of marine two-stroke diesel engine was developed to predict the deteriorating performance according to elapsed time for existing ship. The result was compared with the result of the program named TOP-CODE which was used by engine maker and checked to be shown good agreement between them.

• Archives of design research
• /
• 제16권4호
• /
• pp.215-224
• /
• 2003

The cruiser trip which can have various experiences in a short time is growing as the best tourism package because there is less leisure time in contrast of the increased income in 21C. in other words, as the demand of the tourist goes up, the number of ships built newly is increasing. The order of the ship keeping first and second rank in Korea has arranged a long-term strategy in order to get into the global market with the cruiser with the high value added. They also set the objective related to the cruiser design and skillful construction work. We need to observe the change and trend of the cruiser with a care at this time when the cruiser industry is launched out. In this study, the cruiser industry is divided by four periods: the spring time, the depressed time, the developing time and the peak time, on the basis of the trend of the development and the change of space structure. In addition, it was analyzed in this study that there were the various trends such as the ratio, the structure and the type of the space as well as the interior plan in the passenger's residential place The aim of this study is to present the fundamental material about the interior plan to prepare for building the domestic cruisers in a foreseeable future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제15권1호
• /
• pp.33-39
• /
• 2009

The 21st century is often referred to as maritime age. The sea is a rich repository of natural resources, comfort shelters and the hopes and dreams of human being. But there is always possibility of disaster as well as hopes and dreams. Although there have been many advances in the ship building technology, the risk of accidents is on the increase due to the increase of maritime traffic and the revitalization of marine leisure. I like to refer to the systematic search and rescue system for the rapid response by analyzing recent marine accidents. For the safe navigation, it is necessary to establish institutional systems such as ship technology, navigation equipments, excellent human resources, traffic control, etc. and navigation components also have to be well organized each other. It is also necessary to build a prompt accident management system. The search and rescue system for the rapid response and the way of reducing the incidence of marine accidents were reviewed through the analysis of recent marine accidents.

• Journal of the Society of Naval Architects of Korea
• /
• 제38권1호
• /
• pp.86-98
• /
• 2001

Due to the rapid growth of ship building industry and the increment of ship construction in Korea, several hundred thousand of lifting lugs per year, have been installed at the lifting positions of ship block and removed after finishing their function, therefore. appropriate design system for the strength check or the optimal design of each lug structure has been required in order to increase the capability of efficient design. In this study, the design system of D-type lifting lug structure which is most popular and useful in shipyards, was developed for the purpose of initial design of lug structure. Developed system layout and graphic user interface for this design system based on the $C^{++}$ language were explained step by step. Through the illustration of one example of D-type lug designs, the efficiency of this design system was proved. Therefore, more efficient performance of practical lug structural design will be expected on the windows of personal computer using this design system.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제24권3호
• /
• pp.310-315
• /
• 2014

The domestic maritime environment shows higher frequency of maritime accidents amidst greater traffic volume arising from increasing international seaborne trade and maritime leisure activities. To reduce such maritime accidents, there exist various kinds of safety navigation devices in the ship bridge aimed to mitigate burdens of navigators and support their accurate decision making. Amongst is the AIS considered very important, which is an automatic tracking system to assist understanding of the circumstances in the vicinity by receiving information of other ships and also sending its own; where the information contains errors initially, however, such wrong information is periodically transmitted, accordingly giving rise to hindrance sometimes in decision making by shore operators or ship navigators at sea. This study is to propose the error data and field management algorithm using fuzzy theory toward improving reliability and accuracy in ship related information received from AIS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제21권3호
• /
• pp.497-502
• /
• 2020

For the Navy to acquire the desired vessels in time, it is necessary to plan the schedule accurately for warships. On the other hand, until now, there has been only a subjective prediction of the period of warship construction through a survey by a group of experts. No academic studies have been conducted based on actual data. Therefore, this study presents a model for predicting the construction period of a warship through linear regression based on actual data. Experts first identified the factors that can affect the warship construction period. Actual data of the factors were collected, and regression analysis was performed to estimate the ship construction period. As a result, the key factors selected that influence the construction period of a ship were the number of operational test items, number and type of equipment, and the number and type of R&D equipment. The resulting regression model revealed 96.5% accuracy in terms of internal validity.

• Asian Journal of Atmospheric Environment
• /
• 제9권2호
• /
• pp.146-157
• /
• 2015

Emissions of ozone precursors ($NO_x$ and VOCs) and photochemical ozone creation potentials (POCPs) of VOC emission sources were investigated in the largest port city (i.e., Busan), Korea during the year 2011. This analysis was performed using the Clean Air Policy Support System (CAPSS) national emission inventory provided by the National Institute of Environmental Research (NIER), Korea. For $NO_x$, the emissions from off-road mobile sources in Busan were the most dominant (e.g., $31,202ton\;yr^{-1}$), accounting for about 60% of the total $NO_x$ emissions. The emission from shipping of off-road mobile sources (e.g., $24,922ton\;yr^{-1}$) was a major contributor to their total emissions, amounting to 47% of the total $NO_x$ emissions due to the port-related activities in Busan. For VOCs, the emission source category of solvent usage was predominant (e.g., $36,062ton\;yr^{-1}$), accounting for approximately 82% of the total VOC emissions. Out of solvent usages, the emission from painting was the most dominant ($22,733ton\;yr^{-1}$), comprising 52% of the total emissions from solvent usages. The most dominant VOC species emitted from their sources in Busan was toluene, followed by xylene, butane, ethylbenzene, n-butanol, isopropyl alcohol, and propane. The major emission sources of toluene and xylene were found to be painting of coil coating and ship building, respectively. The value of POCP for the off-road mobile source (61) was the highest in ten major activity sectors of VOC emissions. Since the POCP value of ship transport of off-road mobile source (72) was also high enough to affect ozone concentration, the ship emission can play a significant role in ozone production of the port city like Busan.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.19-28
• /
• 1996

In Asia countries the productions of ship building and marine engines have been increasing, specially Japanese marine industries have worked hard after 1960s and Korean ones after 1980s. Recently the other countries, as Taiwan and China, have been working so that these hour Asian countries are occuping the high level of shared ratio of productions for gross tonnages and horse powers, which are 74 and 64[%] of the world ones ($8.6\times10$+6[GT], $8.6\times10$+6[PS]) in 1994. Korean industries had the highest shared ratio of production of tanker vessel and 2 stroke diesel engine as 45[%]($2.2\times10$+6[GT]) and 37[%]($1.0\times10$+6[PS]) which were more than those of Japan as 34 and 16[%] in 1989 respectively. Some marine databases and their network links among Asian countries are proposed due to the posibility of collection and analyses with their own specifications by the marine industries and operators as well as Japanese ship reliability investigation works(SRIW) like SRIC in Japan. During 1966 and 1996 16 times of SRIW in Japan have been carried out by ship reliability investigation group(SRIG) in Japan. There have been collected and evaluated a great number of field data of failures and maintenances($700\times10$+3[occ], $1.6\times10$+6[MH}) during running hours($13.4\times10$+6[Hrs]), from which many kinds of evaluation indices could be gotten as the three indices of occurring rate$\lambda$(52.2[occ/1000Hrs]), average man-hour mh(2.29[MH/occ]) and manning index MI(119[MH/1000Hrs]). An estimation example having the three indices$\lambda$, mh and MI were shown by the SRIC 1990 Data Base in Japan for the two kinds of fuel oil suppling subsystems which are dual fuel oil one(DFOS) and mono fuel oil one(MFOS). Three indices MI, and mh for DFOS and MFOS results in 7.16 and 5.20[MH/1000Hrs], 2.63 and 2.06[occ/1000 Hrs]. Therefore the more simple subsystem MFOS can save approximately 30[%] of maintenance load. Finlly an utilization methods are shown for the SRIC in Japan by means of computer system and worlwide internet links.