• Journal of Ocean Engineering and Technology
• /
• v.31 no.1
• /
• pp.69-79
• /
• 2017

This paper presents the operations of a multi-beam echo sounder (MBES) installed on the deep-sea remotely operated vehicle (ROV) Hemire. Hemire explored hydrothermal vents in the Forecast volcano located near the Mariana Trench in March of in 2006. During these explorations, we acquired profiling points on the routes of the vehicle using the MBES. Information on the position, depth, and attitude of the ROV are essential to obtain higher accuracy for the profiling quality. However, the MBES installed on Hemire does not have its own position and depth sensors. Although it has attitude sensors for roll, pitch, and heading, the specifications of these sensors were not clear. Therefore, we had to merge the high-performance sensor data for the motion and position obtained from Hemire into the profiling data of the MBES. Then, we could properly convert the profiling points with respect to the Earth-fixed coordinates. This paper describes the integration of the MBES with Hemire, as well as the coordinate conversion between them. Bathymetric maps near the summit of the Forecast volcano were successfully collected through these processes. A comparison between the bathymetric maps from the MBES and those from the Onnuri Research Vessel, the mother ship of the ROV Hemire for these explorations, is also presented.

• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.2
• /
• pp.71-81
• /
• 1987

Nowadays, the high development of industrial technique demands the optimal design of marine structures to be welded under the water, because the underwater welding of the ship hull and marine structures can decrease manpower and cost of production. However there is not available at present any report on fatigue behavior about underwater welded joints. In this paper under tention- tension repeated fatigue stress with frequency of 10 cycles per second by local controlled system, the fatigue strength properties of underwater welded joints of SM41A-2 Plate-to-Plate of 10 mm thickness were experimentally examined. The results obtained were as follows : 1) The fatigue strength of underwater welded joints of SM41A-2 was peaked at the heat input of about 1, 400 joule/mm(180 A, 36 V), while, at the heat input of more than about 1, 100 joule/mm (160 A, 33 V) that of the underwater welds at the higher than cycle of life rather than the lower cycle was higher than that of the base metal but lower than that of the atmosphere welds on account of both cooling and notch effects. 2) The fatigue limit of underwater welds increased with an increase of heat input resulting in a peak of that at the heat input of about 1, 400 joule/mm and then decreased gradually. 3) The fatigue strength at N cycles was peaked between the heat input of about 1, 400 and 1, 700 joule/mm where the strain was rapidly increased. 4) It was confirmed that the optimal zone of heat input condition for obtaining the underwater welds fatigue strength higher than that of the base metal exists, and if out of this zone, the fatigue strength of the underwater welds was lower than that of the base metal because of lack weld penetration, inclusion of slag, voids, etc. 5) By the fatigue test, the underwater welds fractured brittly without visual deformation, so the strain was remarkably less than of the atmosphere welds. 6) The fatigue life factor was peaked at the heat input of about 1, 600 joule/mm (200 A, 36 V) at which the mean strain is a little higher than that of the base metal but quite lower than those of the atmosphere welds, resulting in good underwater welds because both fatigue strength and ductility of the underwater welds are higher than those of the base metal at such heat input.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.337-344
• /
• 2017

The demand of liquified natural gas is increasing due to environmental issues. This reason has resulted in increasing the capacity of liquified natural gas cargo tank. The Mark-III type primary barrier directly contacts liquified natural gas. Also, the primary barrier is under various loading conditions such as weight of liquified natural gas and sloshing loads. During a ship operation, various loads can cause fatigue failure. Therefore, the fatigue life prediction should be evaluated to prevent leakage of liquified natural gas. In the present study, the fatigue analysis of insulation system including primary barrier is performed using a finite element model. The fatigue life of primary barrier is carried out using a numerical study. The value of principle stress and the location of maximum principle stress range are calculated, and the fatigue life is evaluated. In addition, the effects on the insulation panel status and the arrangement of knot or corrugation are analyzed by comparing the fatigue life of various models. The insulation system which has best structural performance of primary barrier was selected to ensure structural integrity in fatigue assessment. These results can be used as a design guideline and a fundamental study for the fatigue assessment of primary barrier.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.541-546
• /
• 2020

The surveillance radar for naval ships is an essential equipment of a battle system that executes the detection and tracking of targets, and the shooting support function; it calculates the three-dimensional track of the target range, azimuth, and altitude to carry out its duty. The surveillance radar consists of an antenna, a transceiver, a processing unit, and an air dryer section. The radar radiates the transmission signal on the antenna section, receives the reflected signal from the target, and amplifies the signals on the transceiver section. The signal received from the antenna is used to provide the operator with target information in various ways. This study identified the display problems when the information about the target is displayed through the radar. The causes of the problems were analyzed and improved. The tracking disappearance phenomenon caused by the altered-course of the ship was improved on the TWS tracking algorithm. The validity of the improved TWS tracking algorithm was confirmed by the normal condition of the target status on the B-scope.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.65-69
• /
• 2005

A construction project of Incheon 2nd bridge, which is connected between the Incheon Song-Do New Town and the Incheon International Airport in Young-Jong-Do, has been proposed by the private capital in 1999. But the optimal width of the main span has not been decided in spite of the three investigations into the feasibility of ship's safe transit in this planned bridge. In this paper, we study the economic analysis on port operational efficiency according to traffic schemes, one-way or two-way of vessels over 10,000G/T, in the main span of this bridge. In this comparative result, total queueing time due to the one-way in the bridge main span is evaluated 20,362 hours in 2011 and 24,544 hours in 2020. Therefore the demurrage cost and the accumulation cost of freight are evaluated 19.7 billion won in 2011, and 23.3 billion won in 2020, then total accumulated costs during 33 years from 2008 until 2040 are evaluated about 768.9 billion won.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.551-557
• /
• 2013

In this paper, we manufactured portable inflatable kayak using ultra high pressure drop stitch. by improving inflatable kayaks' performance with a design using the extra-high-voltage special space paper, they were manufactured to go near to performance of hard shell kayaks. The kayaks were manufactured having all merits of the performance of hard shell kayaks and functionality and portability of the inflatable kayaks, and through performance evaluation of test products, the performance was compared with previous hard shell kayaks. About 6 knot of target speed in the verification result of resistance performance, the developed kayak was more excellent than the HOBIE-KONA kayak by 12.33%. In case of same displacement in a result of inclination test, the centroid of the developed kayak was less distributed by 22.7% than the HOBIE-KONA kayak, based on the bottoms of the ships. This makes the difference for righting arm (GZ) lessened to some degree because the developed kayak is lower than the HOBIE-KONA kayak in the centroid. In the dynamic stability of ship bodies, the HOBIE-KONA kayak showed a little excellent performance. However, in rudder force and resistance factor, the developed kayak was more outstanding than the HOBIE-KONA kayak.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.655-662
• /
• 2016

This study proposes that a diving supervisor, who can perform the role of both a field manager and a supervisor, be introduced in the national qualification system. The goal was achieved by surveying the general status of the commercial diving sector, including the statistics of an underwater construction company, commercial diving equipment operation condition, diver working hours, diver supply and demand status, and underwater construction market size. The national qualification and national competency standard (NCS) systems were also analyzed to deduce the role definition and work scope of the diving supervisor. Consequently, the following proposition is made: the diving supervisor should be an "on-site manager with the highest job skill in the commercial diving field, who can perform the on-site process management as well as guide, supervise, and educate project participants and serve as an intermediary between the contractor and the workers." The responsibilities of the diving supervisor are proposed to include "diving planning and operation of the diving team," "diving with surface-supplied air and mixed-gas diving system," "chamber operation," "underwater construction," and "ship salvage." The persistent issues in commercial diving sectors, such as diver career development, management, and worker supervision, are expected to be largely resolved with the introduction of this qualification.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.368-374
• /
• 1986

Liparis ingens (Gilbert et Burke) is a demersal fish belonging to Liparidae, widely distributed in the coastal waters of the east coast of Korea. On January 16, 1986, mature adults of Liparis ingens were captured by a demersal gill net near Chongdongchin-ri, Kangwon-do, Korea. The authors stripped eggs and milt, and fertilized on the ship. The eggs were incubated and the larvae were reared in laboratory. The eggs of this species are demersal and adhesive, and are pale yellow, containing many oil globules. Egg diameters were varied from 1.55 to 1.65 mm. The hatching took place in ca. 747 hours after fertilization at the water temperature of $7.09{\sim}10.99^{\circ}C$ and salinity $30.62{\sim}33.98\%0$. The newly hatched larvae were elongate in shape and $4.40{\sim}4.85mm$ in total length with $12{\sim}13$ (abdominal)+40(caudal)=$52{\sim}53$ myomeres. Many melanophores were distributed on the lower jaw, pectoral fins, yolk sac, and ventral line of the tail part. Three days after hatching, the larvae reached 5.15 to 5.25 mm in total length, and the yolk sac was almost absorbed. Some melanophores appeared on the back of auditory vesicles. Seven days after hatching, the larvae attained $5.75{\sim}5.85mm$ in total length.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.2
• /
• pp.128-136
• /
• 2012

Hybrid surveys using hydroacoustic and fish sampling gears such as trammel net, trap were conducted to investigate total biomass, distribution and dominant fish species of the demersal fishes in the marine ranching area (MRA) of Jeju. Four surveys were carried out in June, August, October and November using 38kHz quantitative echo sounder. Catch data using trammel net and trap were used to calculate biomass and to examine dominant fish species. Fish schools were mainly detected in the waters of 20 meters below and around Chagwido waters. By the result of fishing experiments, fish species living in MRA of Jeju were about 40 species, dominant fish species of a detectable fish such as Family Sparidae and Family Monacanthidae etc. were identified 59.4~68.8% of total biomass. Based on the hydroacoustic data, fish length-weight function and target strength information, mean density of the demersal fish estimated were as follows; 0.88g/$m^2$ on June, 1.12g/$m^2$ on August, 1.35g/$m^2$ on October and 1.18g/$m^2$ on November. An estimated average biomass in MRA of Jeju was founded 20.5 tons in 2007, 20.6 tons in 2008, 23.0 tons in 2009, 25.9 tons in 2010. The results showed that biomass of MRA is getting increased slowly. Therefore the hybrid survey method using hydroacoustic and fish sampling gears is assured an effective biomass survey in the waters of mixed species.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.2
• /
• pp.203-215
• /
• 1999

Floating debris was recorded from a training ship, Kaya, of Pukyong National University with about 12 knots speed at July 19~21, 1999 and July 24~26. The sampled area is the Yellow Sea (YS) connected from Cheju Is. of Korea to Qindao harbor of China, divided into 88 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoams, vinyl and plastics, floating metal and glass containers. All identified items within a $120{\pm}20m$ wide band were recorded but ignored if beyond this boundary. The results of distribution of floating debris in the area are as follows: 1. The greatest quantities of marine debris discovered during the survey were $184pieces\;per\;km^2$ near Qindao harbor. The next polluted areas, Sohuksan islands, positioned in the eastern part of YS were scattered in about $40pieces/km^2$ or so. 2. Among items, woods, paper and cardboard, vinyl and plastics were found out near Qindao Coast of China. On the other hand, there were many styrofoams, nylon netting and rope near the area of Sohuksan islands in the eastern part of YS. 3. The distribution densities of western part of YS near Qindao are varied with largely range in items and quantities but those of the eastern part, near Sohuksan islands were nearly constant. 4. Styrofoams were composed of 63% among all debris in YS, next paper and cardboard 15%, and wood item, vinyl and plastics each 10%. Therefore, marine debris of YS is revealed that distribution characteristics and composition are very different in each area. These phenomena are concluded that they largely depend on the life styles in land and the utilities of the sea. And of items, styrofoams is dominated by the distribution pattern of YS. Furthermore, surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps all sites of the YS and contributed to the finding sources, the stationary area and removal method of debris joined the flow patterns.