• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.727-730
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, three types of MD-ARS, two passive and one active devices, are developed for small ships. After they are installed on the cabin of the small leisure boat, respectively, a series of test is conducted before and after operating them. Through the test, it is confirmed that the roll responses of the ship are pretty well reduced by the system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2235-2242
• /
• 2016

The electric power system based on fuel cell is applied in various forms to the ship and offshore plants. In particular, a research on the hybrid power system of the fuel cell combined with battery in connection topology has been researched actively. Fuel cell-based hybrid ship has not been carried out research, it is not carried out research in the integrated monitoring system. In this paper, we developed an integrated monitoring system to increase the convenience and stability for the hybrid fuel-cell ship operator. Research into integrated monitoring system based on GUI (Graphic User Interface), in consideration of the stability of the user convenience and ship operations, and developed communication and hardwired signal with the main equipment of the ship, to see in realtime state of the ship. The collected ship operation data is stored and it can be seen after the ship operating.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.378-384
• /
• 2014

Trawlers are divided into stern and side types by the method of shooting and hauling net, but the latter is difficult to find beside Korea. In East Sea of Korea, the side type used to be in early 2000's, but it improved to stern type because of its inefficient operating method. The aims of this paper is to make clear the stability of the side trawler in the East Sea, and then confirm whether it satisfy the IMO rule or not, the degree of the transverse inclining angle of the ship when hauling net at hull side. In results, the stability of the ship in initial inclining range satisfied the IMO rule and the domestic rule, but not satisfied those rule in over the range. The limit load of the ship that was coincide with the angle of beam end in hauling net at side was about 26 tons, 18 tons in normal sea condition and storm warning condition respectively. The transverse inclining angles of the ship in hauling net were much higher from 3.3 to 5.5 times than the longitudinal inclining angle of the stern trawler, although those angles were slightly changed with depending on the loading and sea condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.121-128
• /
• 2021

According to the increasing interest and demand for the Autonomous Surface Vessels (ASV), the autonomous navigation system is being developed such as obstacle detection, avoidance, and path planning. In general, autonomous navigation algorithm controls the ship by detecting the obstacles with various sensors and planning path for collision avoidance. This study aims to construct and prove autonomous algorithm with integrated various sensor using the Robot Operating System (ROS). In this study, the safety zone technique was used to avoid obstacles. The safety zone was selected by an algorithm to determine an obstacle-free area using 2D LiDAR. Then, drift angle of the ship was controlled by the propulsion difference of the port and starboard side that based on PID control. The algorithm performance was verified by participating in the 2020 Korea Autonomous BOAT (KABOAT).

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.260-265
• /
• 2003

Recently there are operating the Floating Vessel with the positioning control unit in ocean. This technology is not open to industrial society as exclusive one. In order to improve technical competition for its domestic product. It is required to develope the relevant product like above subject. This system consist of DGPS System, Unique Analysis, System Network, and Mooring System and so on. Accordingly Model/Field test were carried out to verify its Function / Performance for application of practical product. In this development, we have prepared the successful result to operate the speedy / accurate / stable unit as shown on this subject 'Development of Positioning Control System for Ship and Offshore using the DGPS'. And also it is expected to install this product for ship and offshore unit.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1312-1316
• /
• 2014

The color and the installation position of the LED lamp for night voyage of the ship are changed by the purpose of it. The power dissipation occurs because a navigation light is on and off or continuously on. In addition, in case that the light is produced by operating generator in the ship, it's very inefficient except that it's on a voyage. Therefore in this dissertation, we construct auxiliary power system for the LED lamp of the ship, producing and developing a module, a panel, and a charging system using Dye-sensitize Solar Cell.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.302-312
• /
• 2012

Underwater vehicles play a very important role in underwater engineering. Water-tight junction box (WJB) is one of the key components in underwater vehicle. This paper puts forward a pressure self-adaptive water-tight junction box (PSAWJB) which improves the reliability of the WJB significantly by solving the sealing and pressure problems in conventional WJB design. By redundancy design method, the pressure self-adaptive equalizer (PSAE) is designed in such a way that it consists of a piston pressure-adaptive compensator (PPAC) and a titanium film pressure-adaptive compensator (TFPAC). According to hydro-mechanical simulations, the operating volume of the PSAE is more than or equal to 11.6 % of the volume of WJB liquid system. Furthermore, the required operating volume of the PSAE also increases as the gas content of oil, hydrostatic pressure or temperature difference increases. The reliability of the PSAWJB is proved by hyperbaric chamber tests.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.541-551
• /
• 2020

Based on the trend, there have been numerous researches analysing the ship collision risk. However, in this scope, the navigational conditions and external environment are ignored or incompletely considered in training or/and real situation. It has been identified as a significant limitation in the navigational collision risk assessment. Therefore, a novel algorithm of the ship navigational collision risk solving system has been proposed based on basic collision risk and vulnerabilities of marine accidents. The vulnerability can increase the possibility of marine collision accidents. The factors of vulnerabilities including bad weather, tidal currents, accidents prone area, traffic congestion, operator fatigue and fishing boat operating area are involved in the fuzzy reasoning engines to evaluate the navigational conditions and environment. Fuzzy logic is employed to reason basic collision risk using Distance to Closest Point of Approach (DCPA) and Time of Closest Point of Approach (TCPA) and the degree of vulnerability in the specific coastal waterways. Analytical Hierarchy Process (AHP) method is used to obtain the integration of vulnerabilities. In this paper, vulnerability factors have been proposed to improve the collision risk assessment especially for non-SOLAS ships such as coastal operating ships and fishing vessels in practice. Simulation is implemented to validate the practicability of the designed navigational collision risk solving system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.839-846
• /
• 2013

In this paper, an effort has been made to design and develop an optimized programming model for Real-time Ship Management System. Replacing the conventional interrupt-driven programming model, an embedded real-time operating system (RTOS) has been implemented on the system, allowing processes to run virtually simultaneous and multitasking. Data management algorithms are designed and developed in the RTOS to facilitate data distribution amongst tasks and optimize the CPU processing time through intelligent resource utilization. Finally, data lost in the system has been minimized via the improvement of data processing rate under the optimized programming model.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.3
• /
• pp.133-140
• /
• 2000

The paper deals with the implementation of prototype Ship Simulator system (VRSS) by Virtual Reality techniques with Head Mounted Display (HMD) device. The prototype VRSS was consists of PC-based human sensors, object oriented operating system. In addition, two kinds of databases arranged from Head Related Transfer Functions and 3D object models were used to create 3D sea sound, and to construct virtual world, respectively. Using the prototype system, we carried out some simulation tests for the overtaking situation to prevent collisions at sea, and discussed on the usability of the system. As results from simulations, the prototype VRSS can provide multisensory and interactive display environment. The results gave rise to the user interaction with 3D objects that give realistic reproduction of navigational environments under a given scenario. Thus, we found that the prototype VRSS should be one of the next-generation ship simulation system.