• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.785-794
• /
• 2005

Modern ship hulls of large oil carriers and container carrers have become more flexible with scantling optimization and increase in ship length. On the other hand. as the demand for power has increased with the ship size. shaft diameters have become larger and stiffer. Consequently. the alignment of the propulsion system has become more sensitive to hull girder deflections. resulting in difficulties in analyzing the alignment and conducting the alignment procedure. Accordingly. the frequency of shaft alignment related bearing damages has increased significantly in recent years. The alignment related damages are mostly attributed to inadequate analyses. changes in the design of the vessel. shipyards' practices in conducting the alignment. and a lack of well defined analytical criteria. The hull deflections should be considered at the design stage to minimize the bearing damage caused by hull deflection. Hull deflections can be estimated by analytical approach and reverse calculation using the measured data. The hull girder deflection analysis using the reverse calculation will be introduced in this paper.

• 해양환경안전학회지
• /
• 제30권1호
• /
• pp.118-126
• /
• 2024

본 논문에서는 컨테이너선의 선형 최적 설계 자동화와 관련하여 연구한 내용과 결과를 정리하였다. 컨테이너선은 일반적으로 프루우드 수 0.26 근처에서 운항하는 선박으로 이 속도에서 운항하는 선박 전용 선형 최적 설계 자동화를 구현하기 위하여 최적화 알고리즘, 선형 변경 알고리즘, 선박 성능 예측 알고리즘, 자동화 알고리즘 그리고 반복적 계산 기법을 적용하여 컨테이너선의 선형 최적 설계 자동화가 가능한 수치해석 컴퓨터 프로그램을 개발하였으며, HOTCONTAINER라고 명명하였다. 본 연구에서는 선형 최적 설계를 위한 설계 변수의 적절한 선정을 위하여 민감도 분석 알고리즘을 개발하여 적용하였다. 개발된 선형 최적 설계 자동화 알고리즘의 신뢰성과 실선 적용성을 파악하기 위하여 세계적으로 다양한 연구가 진행된 컨테이너 선박인 KCS 선박을 대상 선박으로 하여 선형 최적 설계 자동화 수치해석을 수행하여 그 결과물로써 최적 선박을 도출하고, 대상 선박과 최적 선박의 조파저항과 파계 그리고 파고를 비교하였다. 결론적으로 최적 선박이 대상 선박과 비교하여 조파저항이 47.63% 감소한 것을 볼 수 있었으며, 배수량과 접수 표면적은 각각 0.50%, 0.39% 감소한 것을 볼 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.629-643
• /
• 2018

For a sailing ship, the frictional resistance exerted on the hull of ship is due to viscous effect of the fluid flow, which is proportional to the wetted area of the hull and moving speed of ship. This resistance can be reduced through air bubble lubrication to the hull. The traditional way of introducing air to the wetted hull consumes extra energy to retain stability of air layer or bubbles. It leads to lower reduction rate of the net frictional resistance. In the present paper, a novel air bubble lubrication technique proposed by Kumagai et al. (2014), the Winged Air Induction Pipe (WAIP) device with opening hole on the upper surface of the hydrofoil is numerically investigated. This device is able to naturally introduce air to be sandwiched between the wetted hull and water. Propulsion system efficiency can be therefore increased by employing the WAIP device to reduce frictional drag. In order to maximize the device performance and explore the underlying physics, parametric study is carried out numerically. Effects of submerged depth of the hydrofoil and properties of the opening holes on the upper surface of the hydrofoil are investigated. The results show that more holes are favourable to reduce frictional drag. 62.85% can be achieved by applying 4 number of holes.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.349-355
• /
• 2015

Through the recent accident, the checking of ultimate hull girder capacity for container ship should be needed. Smith’s method is well known as the only simplified method to access rapidly for ultimate hull girder capacity except very expensive nonlinear F.E approach. This simplified method, however, is admitted to apply only to bulker and tanker in accordance with Classification Rules up to now. The targets of this study are to verify effectiveness of the simplified method for container ship’s ultimate hull girder strength and to propose the safety factor considering the local bending in double bottom structures due to out of plane loads through the nonlinear F.E analyses. Two different sized ships and three loading conditions which are pure bending, homo-loading and one-bay empty condition were used for this study. Based on the F.E results, the present study showed that CSR’s simplified method is available for the ultimate hull girder strength of container ship and over 1.2 of safety factor should be applied to consider the local bending effect in double bottom structures due to out of plane loads such as sea pressure an cargo.

• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.12-23
• /
• 2006

In this paper, a numerical study is carried out to investigate the turbulent flow around a twin-skeg container ship model with rudders including propeller effects. A commercial CFD code, FLUENT is used with body forces distributed on the propeller disk to simulate the ship stem and wake flows with the propeller in operation. A multi-block, matching, structured grid system has been generated for the container ship hull with twin-skegs in consideration of rudders and body-force propeller disks. The RANS equations for incompressible fluid flows are solved numerically by using a finite volume method. For the turbulence closure, a Reynolds stress model is used in conjunction with a wall function. Computations are carried out for the bare hull as well as the hull with appendages of a twin-skeg container ship model. For the bare hull, the computational results are compared with experimental data and show generally a good agreement. For the hull with appendages, the changes of the stem flow by the rudders and the propellers have been analyzed based on the computed result since there is no experimental data available for comparison. It is found the flow incoming to the rudders has an angle of attack due to the influence of the skegs and thereby the hull surface pressure and the limiting streamlines are changed slightly by the rudders. The axial velocity of the propeller disk is found to be accelerated overall by about 35% due to the propeller operation with the rudders. The area and the magnitude of low pressure on the hull surface enlarge with the flow acceleration caused by the propeller. The propellers are found to have an effect on up to the position where the skeg begins. The propeller slipstream is disturbed strongly by the rudders and the flow is accelerated further and the transverse velocity vectors are weakened due to the flow rectifying effect of the rudder.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.128-134
• /
• 2019

In shipbuilding, accurate fabrication of curved hull plates is one of the most important steps, since the shape of ship hull, which is very critical in the overall performance of a ship, is a collection of such plates. The curved hull plates forming process requires a significant amount of time by skilled workers in shipbuilding. In general, the workers cause thermal distortion in the plate and forming initial shape using gas heat source. So shipbuilding companies need skilled workers who have long experience. To solve the problem, a lot of researchers tried to develop automation system for curved hull plates. In this paper, we propose automatic heating system with gantry robot, high frequency induction heater to replace the gas heat source and automatic measurement system. We apply the system to forming concave type plate that is actually used in ship manufacturing. In addition, a system was developed to automatically generate heating information, such as the heating location and the heating speed, for actual heating process. Then the system was applied to the actual heating material. It is shown that the proposed triangle heating pattern makes desired concave shape successfully. The induction heating system showed that it can be used for automation system of curved hull plates forming process replacing gas heat source.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.1-11
• /
• 2004

In this paper, the resistance characteristics of high-speed ship are studied in the region of shallow water condition. For the purpose of this research, model tests in a ship model basin are carried out with an equipment for the satisfaction of shallow water condition, and the computions of wave resistance characteristics and the flow simulations around a ship hull are performed by Michell's thin ship theory and a finite difference method based on MAC scheme, respectively. The calculation results for the resistance and flow characteristics of a ship hull are compared with those from the model tests in deep and shallow water conditions. From the comparison results, it is known that the variation of wave pattern around a ship hull caused by shallow water condition has the most influence to the resistance characteristics of a high-speed ship advancing on shallow water.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.245-250
• /
• 2003

Hull form development and Anti-rolling tank of G/T 360ton class fishery patrol ship was carried out in the CWC at Chosun university, cooperatively with WJFEL(The West Japan Fluid Engineering Laboratory). Same size of 15 knots class fishery patrol ship was selected as a parent form(Model number: CU-015), and modified fore and after body hull form under the slightly lengthened to be suitable for the operation at 20 knots. This paper investigated for a rolling performance and an effective using method when fishery patrol ship was equipped with anti-rolling tank. On several occasions of rolling test was made reference to design data of a similar ship. Although the hull form was highly constrained in being limited to modification of a parent hull form, significant wave resistance improvement was made.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.111-119
• /
• 2015

In the initial ship design stage, performance predictions are generally carried out before and after the hull form design. The former is based on the main dimensions and power information, and the latter is based on the geometry of the hull form and propeller. This paper deals with the practical application of neural networks for the prediction of a ship's performance factors before and after the hull form design. For this, the hull form parameters that affect the performance are studied, and an optimal neural network structure based on the SSMB database is constructed. By comparing the results predicted by neural networks and the model test results, we confirmed that neural networks can be applied to practically evaluate the performance in the initial ship design stage.