• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.227-235
• /
• 2011

Ship handling simulator should have capabilities of calculating ship motions (heave, pitch, and roll) at given sea state and displaying the calculated motions through a real-time 3D visualization system. Motion solver of a ship handling simulator generally calculates those motions in addition to position for an own ship, a main simulation target, but provides only position information for traffic ships. Therefore, it is required to simulate real-time traffic ship and buoy motions coupled with ocean waves in a ship handling simulator for the realistic visualization. In the paper, the authors propose a simple dynamics model by which ship and buoy motions are calculated with the input data of wave height and discuss a method for the implementation of a ship and buoy motions calculation module.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.776-781
• /
• 2010

In the ship-handling simulator, it is important for a ship manoeuvring model to represent the dynamic characteristic of a ship and to be simple for reducing calculation time. Especially, even if principal dimensions of a ship are given in initial design stage, or manoeuvring test data are only given by model or real ship's trials, simulations are often needed to check the manoeuvrability of a ship. In this paper, a simple manoeuvring model based on turning test data of a ship is mathematically developed. And the simulation results are verified by comparing with turning test results of a real ship.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.57-62
• /
• 2004

A mariner feels the ship-handling difficulty when the vessel onboard passes through breakwater. Until now, there is no a layout design of breakwater to take into account the ship-handling difficulty for the mariner. 11Us paper reproduced this situation which ship-handling is difficult by using marine traffic flow simulation, and it applied to Environmental Stress Model as the assessment model which is a quantitative model for evaluating the difficulty of ship-handling arising from restriction in maneuvering water areas and arising from traffic congestion The results are as follows. (1) The layout change of breakwater has little influence for reduction of ship-handling difficulty in the areas of vessel traffic volume. (2) In the situation of same breakwater width, difference of ship speed has an effect on decrease of ship-handling difficulty. (3) Expansion of breakwater width decreases ship-handling difficulty quantitatively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.57-63
• /
• 2003

Marine traffic system is composed of ship, ship's operators and traffic environment The navigation channel is a part of traffic environment and the design of channel is a crucial factor for safe navigation This paper aims to evaluate ship-handling difficulty in straight and bend channels with an Environmental Stress model(ES-model). The ES-model is used to evaluate ship handling difficulty quantitatively on the basis of the ship operator's subjective judgement for safety in navigation The calculation of ES value was made on the basis of three factors such as channel width, ship's length and speed in straight and channels for safe navigation. The interrelation between factors was analyzed and reasonable design standards of channel width, ship's length and speed were proposed for safe navigation of ship in bend channel.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.1-16
• /
• 2001

In view of the fact that marine casualties have more often occurred recently, there is a need for ship-handling simulator as a useful tool for maritime training, safety assessment and so on. Moreover various kinds of hull forms have appeared for the purpose of improving ship manoeuvrality. Therefore ship-handling simulator is in need of a database for various ships, and it can make diverse maneuvering simulations possible to apply respective mathematical model to ship-handling simulator. In this paper, we adopted twin-screw and twin-rudder ship and discussed mathematical model of maneuvering motions for her. It was discussed from the viewpoint of hull damping forces at low advance speed and interaction between hull, propeller and rudder. Using this model, maneuvering motion of twin-screw and twin-propeller ship was simulated numerically and her principal manoeuvrability was examined.

• Journal of Navigation and Port Research
• /
• v.36 no.7
• /
• pp.571-575
• /
• 2012

Berthing and unberthing maneuver is essential work for marine pilots and securing the safety against risks during the maneuver is more important than anything else. Moreover, the maneuvering environment in ports and harbors has changed rapidly and got worse due to development of a new port, the advent of a new type or large-sized ship, and the rapid increase in harbor traffic. As one of measures taken to cope with such changes in the maneuvering environment and for each pilot to improve his own maneuvering ability, this paper developed laptop-based ship-handling simulator which is readily available anytime and anywhere. This paper is to develop a conning display for ship's maneuvering and electronic chart based display widely used nowadays to represent a model ship's movement. The displays were arranged appropriately considering pilot age, easy handling by mouse, using a maximum screen, proper arrangement of rudder, engine, thruster, tug etc and representation of information. Up to now thirteen (13) model ships were developed based on real-ship, whose mathematical model is Japanese MMG & pilots' low speed maneuver.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.184-190
• /
• 2006

It is requested to be evaluated whether environmental change in marine traffic passage by maintenance work affect ship handling, safety, when re-design of traffic passage is planned. In the maintenance work, it is also important to evaluate the change of risk and also benefits. However, in a current evaluation index, it is difficult to evaluate the benefit. The recently developed safety index that is led by employing the Unsafe Ship-handling situations model (US-model) is able to estimate risk level of marine accident in a process of a ship handling. We have already reported the relation of the ratio of 10-3 in harbors (Yokohama, Kobe, and Osaka in Japan) [1]. In this study, we acquired the relation of the ratio between the US value and the marine accident at a narrow waterway; Kurushima Strait in Japan, using a ship handling simulator. And we experimented to estimate a marine accident reduction achieved by the maintenance work of the altered shape of passage.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.715-720
• /
• 2012

This paper is to introduce the development of a LCD monitor-based pilots' ship handling simulator installed in the office of Korea Maritime Pilots Association. This simulator is composed of hardware which includes working server array, operation PC, monitor array, rudder, thruster and telegraph peripheral devices, and software which includes ship mathematical model software, ship conning software, image supporting software and so on. In this simulator, MMG mathematical model is used to create thirteen(13) ship models, which are based on sea trial data & pilots' opinion. According to requirements of pilots, virtual scenes of different port areas are built, and some required additional functions are also developed. By using this simulator, pilots can fulfill all kinds of training exercises, design of channel approaching ports, traffic safety analysis, prevention of accident research and other tasks, so as to grasp the characteristics of different ships, and accumulate experience for piloting.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.3
• /
• pp.33-41
• /
• 1992

Handling performance of a vessel is greatly related with her steering characteristics which consist of two kinds of motion characteristics ; namely course stability and turning ability. The correct prediction of the qualities, especially the steering characteristics is as much important in ship handling as in ship design. It is the purpose of this paper to provide ships handlers better understanding of steering characteristics and then to help them in safe controlling and maneuvering of vessels presenting distinct inherent steering characteristic difference that lies between a fine-form vessel and full-form vessel. The authors calculated dynamic course stabilities of two kinds of ideal models, one of which represents a fine-form ship and the other a full-form ship, based on hydrodynamic data of forces and moments obtained by model tests in maneuvering tanks. The result of calculations indicated that a ship of full-form configuration has inhernet course instability. Though significant nonlinearties affect ship montions in maneuvers, application of linear theory is sufficient for prediction of the maneuvering characteristics of vessels on calm waters for handling reference.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.2
• /
• pp.25-33
• /
• 1998

This paper deals with PC-based ship handling simulator, which is now widely utilized not only for total assessment of safety in harbour area but also for training purpose. The suitable mathematical model for low advance speed manoeuvre is treated with the effects of current, wind, wave, tug force and water depth. We adopt 3 dimensional graphic technique for perspective representation of relative ship motion. Some graphical panels on the screen are devised for data input/output or ship manoeuvring information. We show the real time simulation of berthing menoeuvre applied to Pusan harbour as an example.