• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.4
• /
• pp.667-674
• /
• 2004

This thesis is about the Impressed Current Cathodic Protection (ICCP) control and monitoring system. which brings protection against the corrosion of the ship's hull in the sea environments. The ICCP system is composed of a power supply. anode. reference electrode and controller. AC sources from the ship's generator are converted to DC sources in terms of power supply, and a protection current is sent to ship's hull though anode. The controller fully senses whether or not the detected potential is within a range of protection of ship's hull and then it is automatically controlled to increase or decrease the amount of protective current to be sent to the anode. The monitoring system with RS 232/485 communication is also studied in order to check the normal state of the system at a long period. because an operator does not always watch over this system and thus the system cannot operate well because of his or her negligent management. Since the vessel always navigates in the sea. an characteristics experiment of the ICCP system is conducted by introducing various corrosive environmental factors such as velocity, resistivity, dissolved oxygen, PH, temperature and contamination degree. These results must be referred to when the ICCP system is set up. In short. the ICCP is a multi-system for use on ships and on land structures because it includes a safety device. It is suggested that this system can accomodate a ship's automation and will be very useful.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.124-132
• /
• 1996

This paper discusses a scheduling system effective for producing optimum load distribution in ship design process with particular reference to an accommodation design. Through various analysis of the factors influencing the effectiveness of design process control, it was possible to formulate an algorithm of producing an optimum design schedule. Basic manhours far the ship to be planned by multiplying a difficulty level coefficient for the standard manhours for each design activity is preset, and is converted into manhours for the ship to be planned by multiplying a difficulty level coefficient for the ship. A relation matrix of the design activities is employed in representing the network of the activities. The computerized system showed very effective in producing a design schedule of leveled work load on which particular characteristics of a ship to be planned are properly reflected.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.4
• /
• pp.206-216
• /
• 2013

The present study considers the prediction of wind-induced heel of cruise ship and its stabilization. Wind load in ocean exerts on the surface of superstructure of cruise ship, which causes the heel moment on the ship. The calculation of wind load starts from choosing wind speed profile, so that the logarithmic wind profile model is applied in this study. Heel moment by wind load is calculated by adopting approximate formulation and applied to the ship motion analysis in time domain. Motion stabilizers, such as stabilizing fin and U-tube tank, are considered to reduce the heel effect as well as excessive roll motion. From this study, it is expected that the present method can be applied to the prediction and stabilization of the heel motion of cruise ships.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.214-220
• /
• 2024

Remote control is used for operating maritime autonomous surface ships. The operator controls the ship using control data generated by the remote control system. To ensure successful remote control, three principles must be followed: safety, reliability, and availability. To achieve this, the suitability of both the control data and operators for remote control must be established. Currently, there are no international regulations in place for evaluating remote control suitability through experiments on actual ships. Conducting such experiments is dangerous, costly, and time-consuming. The goal of this study is to develop a suitability evaluation method using the output values of control devices used in actual ship operation. The proposed method involves evaluating the suitability of data by analyzing the output values and evaluating the suitability of operators by examining their tracking of these output values. The experiment was conducted using a shore-based remote control system to operate the training ship 'Hannara' of Korea National Maritime and Ocean University. The experiment involved an iterative process of obtaining the operator's tracking value for the output value of the ship's control devices and transmitting and receiving tracking data between the ship and the shore. The evaluation results showed that the transmission and reception performance of control data was suitable for remote operation. However, the operator's tracking performance revealed a need for further education and training. Therefore, the proposed evaluation method can be applied to assess the suitability and analyze both the control data and the operator's compliance with the three principles of remote control.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.801-804
• /
• 2003

The autopilot system of vessel is proposed to take service safety sorority, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of it is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieving to compensate various nonlinear parameters of vessel and apply it is course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship are nonlinear, which affect various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcome nonlinear parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1509-1513
• /
• 2003

The autopilot system of vessel is proposed to take service safety and security, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of the proposed system is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieved to compensate various nonlinear parameters of vessel and apply it to course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship is nonlinear, which affects various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcomes nonlinear Parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.3
• /
• pp.451-458
• /
• 2022

In Korea, five major ports have been designated as sulfur oxide emission control areas to reduce air pollutant emissions, in accordance with Article 10 of the "Special Act on Port Air Quality" and Article 32 of the "Ship Pollution Prevention Regulations". As regulations against vessel-originated air pollutants (such as PM, CO2, NOx, and SOx) have been strengthened, the Ministry of Oceans and Fisheries(MOF) enacted rules that newly built public ships should adopt eco-friendly propulsion systems. However, particularly in diesel-electric hybrid propulsion systems,the demand for precise control schemes continues to grow as the fuel saving rate significantly varies depending on the control strategy applied. The conventional Power Take In-Power Take Off(PTI - PTO) mode control adopts a rule-based strategy, but this strategy is applied only in the low-load range and PTI mode; thus, an additional method is required to determine the optimal fuel consumption point. The proposed control method is designed to optimize fuel consumption by applying the equivalent consumption minimization strategy(ECMS) to the PTI - PTO mode by considering the characteristics of the specific fuel oil consumption(SFOC) of the engine in a diesel-electric hybrid propulsion system. To apply this method, a specific fishing vessel model operating on the Korean coast was selected to simulate the load operation environment of the ship. In this study, a 10.2% reduction was achieved in the MATLAB/SimDrive and SimElectric simulation by comparing the fuel consumption and CO2 emissions of the ship to which the conventional rule-based strategy was applied and that to which the ECMS was applied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.221-226
• /
• 2012

This research presents an analysis of algorithm for ship track-keeping along a given trajectory. The maneuver of a free running model ship guiding through a simple path are presented. In order to solve the above problem, a desired trajectory is usually determined by GPS points in a pre-fixed place then these points are set in a pre-programmed navigation so that the ship would be automatically tracked. Proportional-Derivative(PD) control which is useful for fast response controllers was used in this program as a course keeping system. A high accuracy GPS receiver was installed on the model ship that could provide positions frequently, the system will compare and give out the remaining distance and heading to the target way-point. The results of ship auto track-keeping experiment will be explained in order to illustrate the adjustment in controlling parameters. These results can be utilized as a preliminary step to carry out the experiment of ship collision avoidance system and automatic berthing in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.209-220
• /
• 1997

DBS offers actual services to mass-media and communication system of very broad region in information society. Especially, the DBS is the only system to access TV broadcasting service on a sailing ship. But the ship's DBS receiver is required a complex antenna tracking system because ships are under complex moving such as pitch, roll, and yaw etc. This study is motivated to develop a tracking antenna system to receive the koreasat on small silo ship. Therefore, this system is researched to small size, light weight, simple operation, and low cost of the product. The mount structure have been a compact size and easy operation to the Az/El 2-axis type which is operated by step motor. And it is very useful on a ship in the around sea of korean peninsula. The antenna has a plate type of micro-strip array, and is a domestic production. The vibration sensor is selected to gyro sensor of ultra-sonic rate type for ship's moving control. Tracking method is used the step-tracking algorithm, and the ship's moving compensation is adapted to the closed loop control method by ship's moving detection of gyro sensor. Tracking test is operated by the ship's moving simulator, we examined the actual receiving state on sailing shipboard in the near sea of korean peninsular.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.649-657
• /
• 2019

An essential part of the development of an autonomous ship is supporting technology that can effectively check and diagnose the operational status of the ship form the shore control center on land. This development has recently occurred in the shipbuilding and shipping industries. In this paper, we present a smart ship solution that operates, as a single system, a data collection platform that gathers ship operation data and a service platform that provides various services. When this smart ship solution was applied to an operating ship, it was determined that a variety of high-quality data could be collected compared to existing ship data collection systems. In addition, it was shown that of the operation data collected, analysis of parameters related to the main engine can be used to determine the overall state by deriving valid results and visualizing patterns. In conclusion, it was suggested that a ship's operation status could be checked more effectively and a comprehensive evaluation could be possible at the shore control center if the results of this study were extended to various ship equipment and analyzed together with the operational environment data.