• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.2
• /
• pp.228-239
• /
• 1992

The purpose of the present research is to develop an efficient numerical method for the calculation of potential flow and predict the wave-making resistance for the application to ship design of tuna purse seiner. The paper deals with the numerical calculation of potential flow around the series 60 with forward velocity by the new slender ship theory. This new slender ship theory is based on the asymptotic expression of the Kelvin-source, distributed over the small matrix at each transverse section so as to satisfy the approximate hull boundary condition due to the assumption of slender body. Some numerical results for series 60, C sub(b) =0.6, hull are presented in this paper. The wave pattern and wave resistance are computed at two Froude numbers, 0.267 and 0.304. These results are better than those of Michell's thin ship theory in comparison with measured results. However, it costs much time to compute not only wave resistance but also wave pattern over some range of Froude numbers. More improvements are strongly desired in the numerical procedure.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.14 no.1
• /
• pp.11-17
• /
• 1977

In order to design safer and more economical ship structures, theoretical structure analysis of entire vessel is desirable. This paper describes the application of the Direct Stiffness Method to ship structures for calculation of forces and moments which act on each part of ship structures. Before application of this method, ship structures have to be replaced with equivalent space frame. Emphasis is placed on the division of total stiffness matrix of entire vessel. Floating barge, of which principal dimensions are $L{\times}B{\times}D=16M{\times}10M{\times}2M$, is taken as calculation sample. The conclusion of this paper is that, in initial stage of ship structure design, the Direct Stiffness Method by Division can be applied to determine frame-space and scantlings of members.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.2
• /
• pp.15-31
• /
• 1990

Recently, there is a tendency to design the large full ships with lower-powered engine as the means for energy saving in ship's navigation at seas. Such a lower-powered ship is anticipated to show the different propulsive performance in rough seas, because the fluctuation of main engine load of lower powered ship is relatively large as compared with higher-powered ship is relatively large as compared with higher-powered ship. The fluctuation of propeller load is nonlinear at racing condition in waves. It is due to the variation of inflow velocity into propeller, the propeller immersion and the characteristics of engine governor. In this paper, the theoretical calculation of the nominal speed loss and the numerical simulation for the nonlinear load fluctuation of a model ship in rough seas are carried out. From the results of calculation, the following are discussed. (1) The ratio of nominal speed loss to the speed in still water. (2) The manoeuvring ability of ship and the operational ability of main engine in a seaway. (3) A method of the evaluation for the fluctuation of propeller torque and revolution on the engine characteristics plane. (4) The effect of engine governor characteristics on the propeller load fluctuation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.197-202
• /
• 2004

It is well known that the hydrodynamic interaction forces between ship and bank wall affect ship manoeuvring motion. This paper deals with the interaction effect acting on a ship navigating closely in the proximity of bank wail. In this paper, the calculation method based on the slender body theory for estimation of the hydrodynamic interaction forces between ship and bank wail is applied. The hydrodynamic interaction forces acting on a ship during passing through the proximity of the bank wail are predicted to evaluate an influence of these interaction forces on ship manoeuvrability. The calculation method used in this paper will be useful for prediction of ship manoeuvrability at the initial stage of design, for automatic control system of ship in confined waterways, for discussion of marine traffic control system and for construction of harbour.

• Smart Structures and Systems
• /
• v.23 no.4
• /
• pp.359-371
• /
• 2019

As part of a structural health monitoring system, the relative geometric relationship between a ship and bridge has been recognized as important for bridge authorities and ship owners to avoid ship-bridge collision. This study proposes a novel computer vision method for the real-time geometric parameter identification of moving ships based on a single shot multibox detector (SSD) by using transfer learning techniques and monocular vision. The identification framework consists of ship detection (coarse scale) and geometric parameter calculation (fine scale) modules. For the ship detection, the SSD, which is a deep learning algorithm, was employed and fine-tuned by ship image samples downloaded from the Internet to obtain the rectangle regions of interest in the coarse scale. Subsequently, for the geometric parameter calculation, an accurate ship contour is created using morphological operations within the saturation channel in hue, saturation, and value color space. Furthermore, a local coordinate system was constructed using projective geometry transformation to calculate the geometric parameters of ships, such as width, length, height, localization, and velocity. The application of the proposed method to in situ video images, obtained from cameras set on the girder of the Wuhan Yangtze River Bridge above the shipping channel, confirmed the efficiency, accuracy, and effectiveness of the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.785-794
• /
• 2005

Modern ship hulls of large oil carriers and container carrers have become more flexible with scantling optimization and increase in ship length. On the other hand. as the demand for power has increased with the ship size. shaft diameters have become larger and stiffer. Consequently. the alignment of the propulsion system has become more sensitive to hull girder deflections. resulting in difficulties in analyzing the alignment and conducting the alignment procedure. Accordingly. the frequency of shaft alignment related bearing damages has increased significantly in recent years. The alignment related damages are mostly attributed to inadequate analyses. changes in the design of the vessel. shipyards' practices in conducting the alignment. and a lack of well defined analytical criteria. The hull deflections should be considered at the design stage to minimize the bearing damage caused by hull deflection. Hull deflections can be estimated by analytical approach and reverse calculation using the measured data. The hull girder deflection analysis using the reverse calculation will be introduced in this paper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.2
• /
• pp.35-47
• /
• 1990

The natural frequency of lateral vibration for ship's propulsion shafting tends to become lower as the relative stiffness of supproted system of the propulsion shafting decreases and the weight of shafting increases. Especially, the propulsion shafting of high-power ships such as car ferries, roll-on/roll-off, and container ships are susceptible to lateral vibration for their resonant speeds are happened to be in ordinary operating speed ranges. So far, many papers on the lateral vibration of ship's propulsion shaftings are published but they treated mainly special cases and not explained explicitly the calculation process. In this paper, the calculation processes of undamped and also forced damped lateral vibration by the transfer matrix method are presented and the calculation programs are developed. With the developed computer programs, a ship's propulsion shafting which was introduced on the published paper is analyzed for its lateral vibration and also the lateral vibration of the main drive shaft for a lathe is calculated to show the availiability of developed computer programs.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.14 no.2
• /
• pp.1-9
• /
• 1977

Streamlines around a ship's hull can be calculated by using streamline tracing method replacing the ship section with distribution of singularity. The influence of frame lines on the stream surrounding a hull surface, however, can not be found. Jinnaka studied on streamlines for Lewis form by applying the slender body theory. The influence of frame lines on stream surrounding a hull surface is well found in Jinnaka's method. In this paper streamline calculation method for chine type has been developed by using conformal transformation and applying slender body theory as Jinnaka did. Three kinds of model-one of series 62 for chine type, V.L.C.C. and high speed craft built in Korea for Lewis form-were used for streamline calculation;

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.339-349
• /
• 2017

This paper is related to structural design evaluation of 19,000 TEU ultra large container ship, dealing with hydroelastic response, i.e. springing and whipping. It illustrates application of direct calculation tools and methodologies to both fatigue and ultimate strength assessment, simultaneously taking into account ship motions and her elastic deformations. Methodology for springing and whipping assessment within so called WhiSp notation is elaborated in details, and in order to evaluate innovative container ship design with increased loading capacity, a series of independent hydroelastic computations for container ship with mobile deckhouse and conventional one are performed with the same calculation setup. Fully coupled 3D FEM - 3D BEM model is applied, while the ultimate bending capacity of hull girder is determined by means of MARS software. Beside comparative analysis of representative quantities for considered ships, relative influence of hydroelasticity on ship response is addressed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.3
• /
• pp.273-285
• /
• 1996

Generally, the flow around the ship's hull often appear 3-dimensional separation at the bow and stem, and the vortex by this flow affects greatly the resistance propulsive efficiency and maneuverability of the ship. This study is compared the calculated result based on the streamlines calculation method with the experimental result by oil fIlm method to analyze the patterns and characteristics of the flows around the ship's hull of chine form. DTMB Series 62, 4667-1 vessel was selected as a sample ship of chine form and model ship was painted with the mixture of oil-color, paint, and poly wax at the surface of the vessel and tested in the model towing tank of Inha University. The results obtained in this study are listed briefly as follows ; 1. For the single chine form, after $4\frac{1}{2}$ station the streamlines are crossed at the chine line and the streamlines are converted to the vortex follow the chine line. 2. For the single chine form, the vortex appered increases and severely in and arround the stern. 3. The approximate streamlines for the ship's hull of chine form can be assigned by the use of the Watanabe's basic transformation formular.