• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.281-284
• /
• 2006

After building a ship in a shipyard, there are so many repeated inspection of welding seam defects and painting status before delivering to the ship's owner. An inspection on the bottom part of a ship in commercial service should be done in every two years for the purpose of safety and for the prevention of ship speed deterioration. conventional welding seam inspection systems are rely on the visual inspection by human or the ultrasonic inspection for the selective part of a ship. This paper suggests a remote controlled inspection system for the examination of large ships or steel structures. The proposed system moves in contact with the ship under inspection and have a CCD camera to provide visual-guidance information to a remotely located human worker. Additionally this system utilizes a weld line tracking algorithm for an optimal position control. We verified the effectiveness of the inspection system by experimental data.

• 한국항해학회지
• /
• 제7권2호
• /
• pp.65-113
• /
• 1983

A lot of studies of ship's economy are on the traditional fields such asreducing propulsion resistance, raising cargo handling rates and lessening building consts, but there are few researches on the merchant ship's economy concerning their deadweights and speeds according to shipping companies managerial cercumstances. Contrary to the contemporary trend that "the bigger, the better, if the cargo handling rate could increased sufficiently to hold down port time to that rate of smmaler vessels", this paper demonstrates the existence of certain limits in ship's size and speed according to the coditions of the freight rates, voyage distances, cargo handing rates, prices of fuel oil, interst rates etc. Fom the curves of criteria contour for various ship's deadweights and speeds which are depicted from the gird search method, one can get the costs and the yearly profit rates under the conditiions of large volume with long term contracts for the transportation of bulk cargoes. In estimating ship's transportation economy, the auther takes the position that the profit rate method is properer than the cost method, and introduces the calculation table of the voyage profit rate index. The use of the criteria contours will be of help to ship owners in determining the size and speed of the ship which will be built or purchased and serve in a certain trade route.

• 한국기후변화학회지
• /
• 제6권4호
• /
• pp.345-355
• /
• 2015

In this study, we researched a space allocation method of emissions from domestic coastal shipping (passenger ship, cargo ship, fishing boats). We were building a geographic information data that is used in GIS for emissions of space allocation, and presented a methodology capable of performing the space allocated for each grid by calculating the emissions. Passenger ships were assigned emissions of routes each the ship that operated at a fixed. Emissions of crusing mode of cargo ship, was equally assigned to the safe operation line, which is defined for domestic cargo ship. Also, Emissions of maneuvering (moving into or out of port) and hoteling (operations while stationary at dock), was assigned in consideration of anchorage in the major port. Fishing boat was evenly allocated monthly emissions in the country every month fishing grounds formation zone. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• 한국항해학회지
• /
• 제8권2호
• /
• pp.51-70
• /
• 1984

In the North Pacific Ocean a lot of large waves set up in winter, affected by continued winds and swells owing to severe extratropical cyclones. Under this sea condition, if the ship is about 100,000L/T (in deadweight capacity tonnage), we can't find the danger involved in the ship at sea apparently. But when we compare the seaworthiness of ship's building strength with the stress given to the hull by waves, we can't insist that the former be more stronger than the latter. As a result, VLCC is in danger of destroying and cutting for lack of longitudinal strength in heavy weather. Up to this time, Naval Architects have actively studied the relation between ship's longitudinal strength and waves as a ship's projector; however, actually, they have never made more profound study on the problem of longitudinal strength in relation to navigation. The main puprpose of this thesis is to clarify these vivid actual states of ship's trouble unknown to ship's masters. In this thesis we picked up VLCC Pan Yard, a vessel of Pan Ocean Bulk Carrier company's, as a model ship. And in the North Pacific Ocean, we have chosen for this research the basins where the wind speed and the wave height are greater than average. The data used this thesis are quotes from the "winds and waves of the North Pacific Ocean('64-'73)", and wind speed more than 30 knots was made use of as an ocject of this study. By usinh the ITTC wave spectrum, we found out the significant waves for every 5 knots within the range of 20 knots to 45 knots of wind speed. According to this H1/1000 was calculated. The stress of ship's hull is determined by ship's speed and wave height. We compared the ship's longitudinal strength with a planned wave height by rules of several famous classification societies in the world. In the last analysis, we found out that ship's present planned strength in heavy weather is not enough. Finally we made a graph for avoiding heavy weather, with which we studied safe ship's handling in the North pacafic Ocean in winter.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.81-85
• /
• 2003

어업통신에서 출어선의 위치보고를 디지털화하여 VMS(Vessel Monitering system)를 구축하기 위하여는 체계적인 정보의 관리와 운용이 필요하다. 또한 위치정보의 체계적인 관리를 위해서는 먼저 정보의 권역화 및 집중화가 선행되어야 한다. 지역의 전파환경, 출어선의 조업해역, 어선세력, 트래픽량 등을 고려하여 권역을 구분하고, 권역별로 선위정보를 수집하여 이것을 본부에 집중하면 VMS의 DB를 구현할 수 있다. 본 논문에서는 VMS를 구축하기 위한 어업정보망의 구축과 어선의 위치정보를 자동으로 전송하는 방안에 대하여 연구하였다.

• 한국정보통신학회논문지
• /
• 제7권7호
• /
• pp.1387-1392
• /
• 2003

어업통신에서 출어선의 위치보고를 디지털화하여 VMS(Vessel Monitoring system)를 구축하기 위하여는 체계적인 정보의 관리와 운용이 필요하다. 또한 위치정보의 체계적인 관리를 위해서는 먼저 정보의 권역화 및 집중화가 선행되어야 한다. 지역의 전파환경, 출어선의 조업해역, 어선세력, 트래픽량 등을 고려하여 권역을 구분하고, 권역별로 선위정보를 수집하여 이것을 본부에 집중하면 VMS의 DB를 구현할 수 있다. 본 논문에서는 VMS를 구축하기 위한 어업정보망의 구축과 어선의 위치정보를 자동으로 전송하는 방안에 대하여 연구하였다.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.258-266
• /
• 2013

In shipbuilding, 2D manufacturing drawings are crucial for building a ship. Even various types of 3D models are being utilized for supporting ship manufacturing, which does not reduce the importance of 2D drawings. Recently things are changing in the shipbuilding industry. To reduce the number of 2D drawings or to reduce the quantity of information contained in 2D drawings, some attempts that can substitute for 2D drawings are being made. One of the attempts is to visualize lightweight 3D manufacturing models in a mobile device. In this paper, a method for displaying lightweight 3D models of a ship in an Android based device is introduced. To overcome the problem with parsing JT files in Android system, JT files are parsed in a Windows based server and as-simple-as-possible visualization data are transmitted to an Android based viewer. A comparison result with a commercial system is also given.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.323-329
• /
• 2008

This paper deals with modeling and characteristic analysis of a large-powered electric ship propulsion system. Particularly, system modeling in accordance with the required shipping performance, building-up the equivalent circuit and the power analysis based on load flow have been performed. In addition, abnormal operating condition of short-circuit network is considered for investigating the safety of system components under the over-load condition. Furthermore, protective device like circuit breaker has been specified in order to make the entire system operate normally in case of short-circuit emergency.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.107-112
• /
• 2005

During assembling the ship block, the lifting and turnover events are not only inevitable but also very important for safety aspects and block accuracy. However, they have been executed in empirical ways rather than numerical ways in consideration of the building schedule. In this paper, a structural analysis has been carried out for the container ship side block that collapsed in the course turnover stage. As a result, the causes of collapse and countermeasure plans are presented.