• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1305-1314
• /
• 2023

The global ship repair and modification market is expected to grow up to approximately $ 30 billion by 2025. Korea's shipbuilding industry is leading the world grounded on its international competitiveness in design and production technology. The reality, however, is that the ship repair and modification industry is centered on Gyeongnam, and there are only two to three ship repair workplaces that can repair large ships. Therefore, domestic ship repair companies target small and medium-sized ships mainly. This is because there are few workplaces equipped with a large dock in which large ships like LNG ships can be inspected regularly or repaired, complaints are severe for environmental problems, and related environmental regulations are so strict that it is very hard to obtain government approval for the extension of ship repair and modification workplaces or the opening of new shipbuilding sites. Besides, on account of the workers' high wages, few experts related, and higher ship repair price compared to that of Southeast Asia, most of the volume of repairing large ships including domestic LNG ships is being lost to Southeast Asian or Chinese markets. In this study, the work process and pre-work preparation process for ship hull (winch, windlass, hatch cover, ramp door, cargo gear, anchor chain) repair were analyzed and presented to foster domestic ship repair experts and revitalize related industries.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.489-494
• /
• 2015

본 연구의 목적은 선박의 충돌에 의해 발생하는 원형단면을 갖는 실린더형 해양구조물의 충격손상을 최소화 시키기 위한 것이다. 기존의 설계기준, 코드 및 선급규정 등에 명시된 충격해석은 해수유체영역이 고려되지 않은 상태로 계산을 수행해 왔다. 본 연구에서는 해수유체영역을 고려한 모델링방법과 동적응답, 변형률, 내부에너지 등의 응답파라미터를 고찰하여 기존에 고려하지 않은 결과와 비교분석하였다. 충돌선박의 선속을 변화시켜 다양한 상태의 하중케이스를 고려하였고 가장 큰 충격하중상태인 2.0m/s에서의 선속에서의 응답결과를 비교분석하였다. ALE방법을 이용하여 해수유체영역을 고려한 경우 해수영역에서의 충격에너지 흡수와 유체감쇠를 통해 응답크기가 더 작고 구조물의 응력과 소성영역의 분포가 고르게 나타났다. 해수유체영역을 고려하지 않은 경우 보다 보수적인 설계가 될 수 있음을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1354-1359
• /
• 2014

A survey is carried out for the future energy sources to be used for ship's propulsion and ship's machinery and operations. 44 global experts from Korea, America, Norway, Denmark, Japan and German who are currently working in the shipyard and offshore fields participated at the survey. Quantitative predications on the market shares of various energy sources, such as oil, LNG, fuel cell, wind energy, solar energy and nuclear energy are made. MPI (market prediction index) is considered as a quantitative index for easy comparison between future's energy sources used for ship's propulsion and operations. It is expected that the MPI of LNG becomes twofold in 2020 against 'before 2016'. It could be also said that hydrogen based fuel cell is expected to increase rapidly for the coming years unless a new alternative energy appears.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.120-127
• /
• 2015

When a deep-seabed lifting pump is kept this device has bending and deformation in the axis due to its long length(8m). These influences can be caused a breakdown. Therefore, a mounting must be developed to keep the lifting pump safe. This paper discusses the hydraulic cylinder design of the lifting pump and structural safety estimation of the mounting using SBD(simulation-based design). The multi-body dynamic simulation method is used, which has been used in the automotive, structural, ship building, and robotics industries. In this study, the position and diameter of the hydraulic cylinder were determined based on the results of the strokes and buckling loads for the design positions of the hydraulic cylinder. A structural dynamic model of the mounting system was constructed using the determined design values, and the structural safety was evaluated using this dynamic model. According to these results, this system has a sufficient safety factor to manufacture.

• 한국해양공학회지
• /
• 제36권3호
• /
• pp.143-152
• /
• 2022

To reach a port, a ship must pass through a shallow water zone where seabed effects alter the hydrodynamics acting on the ship. This study examined the maneuvering characteristics of an autonomous surface ship at 3-DOF (Degree of freedom) motion in deep water and shallow water based on the in-port speed of 1.54 m/s. The CFD (Computational fluid dynamics) method was used as a specialized tool in naval hydrodynamics based on the RANS (Reynolds-averaged Navier-Stoke) solver for maneuvering prediction. A virtual captive model test in CFD with various constrained motions, such as static drift, circular motion, and combined circular motion with drift, was performed to determine the hydrodynamic forces and moments of the ship. In addition, a model test was performed in a square tank for a static drift test in deep water to verify the accuracy of the CFD method by comparing the hydrodynamic forces and moments. The results showed changes in hydrodynamic forces and moments in deep and shallow water, with the latter increasing dramatically in very shallow water. The velocity fields demonstrated an increasing change in velocity as water became shallower. The least-squares method was applied to obtain the hydrodynamic coefficients by distinguishing a linear and non-linear model of the hydrodynamic force models. The course stability, maneuverability, and collision avoidance ability were evaluated from the estimated hydrodynamic coefficients. The hydrodynamic characteristics showed that the course stability improved in extremely shallow water. The maneuverability was satisfied with IMO (2002) except for extremely shallow water, and collision avoidance ability was a good performance in deep and shallow water.

• 플랜트 저널
• /
• 제16권3호
• /
• pp.37-41
• /
• 2020

최근 노후화된 LNG선박의 증가, 선박가격 하락으로 중고 LNG선 재활용 가능성이 증대되고 있다.또한 노후발전소 대체관련 Needs가 늘고 있으며 가스생산량 증가 및 친환경 연료가 각광받고 있어 가스 발전플랜트 매력도도 상승하고 있다. 이에 본 연구에서는 중고 LNG선을 개조하여 LNG저장 및 발전플랜트 기능을 갖추게 하고 이밖에 재기화기능,벙커링 기능을 갖춘 복합기능 플랜트에 대한 기획연구를 수행하였다.이를 통해 노후 화력발전 중단,원전해체 등으로 인한 에너지 공백을 대체하고 국가 위기사태에 이동형 발전 플랜트를 긴급으로 투입가능해지며 대북 경협 등 정책에 새로운 대안으로 활용할 수 있다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.78-84
• /
• 2016

In this paper, turbulence models for considering roughness in the open source code(OpenFOAM) was investigated. Wall function in the RANS(Reynolds-averaged Navier - Stokes) turbulence model was modified considering roughness on the flat plate by using roughness function. Correlation between the first layer height in the CFD model and roughness height of the plate was observed, and the most proper roughness function, and the first layer height from the plate wall in the CFD analysis was suggested in this paper.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.411-418
• /
• 2018

This paper introduces a new method of ice load generation in the time domain for the station-keeping performance evaluation of Arctic offshore structures. This method is based on the ice load spectrum and mean ice load. Recently, there has been increasing interest in Arctic offshore technology for the exploration and exploitation of the Arctic region because of the better accessibility to the Arctic ocean provided by the global warming effect. It is essential to consider the ice load during the development of an Arctic offshore structure. In particular, when designing a station-keeping system for an Arctic offshore structure, a consideration of the ice load acting on the vessel in the time domain is essential to ensure its safety and security. Several methods have been developed to consider the ice load in the time domain. However, most of the developed methods are computationally heavy because they consider every ice floe in the sea ice field to calculate the ice load acting on the vessel. In this study, a new approach to generate the ice load in the time domain with computational efficiency was suggested, and its feasibility was examined. The ice load spectrum and mean ice load were acquired from a numerical analysis with GPU-event mechanics (GEM) software, and the ice load with the varying heading of a vessel was reconstructed to show the feasibility of the proposed method.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.43-50
• /
• 2013

This paper presents a structural design review of a marine loading arm used for the fluid transfer of a liquid cargo from a ship or offshore plant. The marine loading arm is installed on a ship, offshore plant, or jetty in order to load or unload liquid cargo such as crude oil, liquefied natural gas (LNG), chemical products, etc. The structural design of this marine loading arm is obliged to comply with the design and construction specifications regulated by the oil companies and international marine forum (OCIMF). In this paper, the structural safety of the initial design for the marine loading arm is evaluated for the design load conditions required by various operational modes. The evaluated results based on a finite element analysis (FEA) are reviewed in relation to the OCIMF specifications.

• 플랜트 저널
• /
• 제13권4호
• /
• pp.41-47
• /
• 2017

본 논문은 해양플랜트 입찰단계에서 시스템엔지니어링(Systems Engineering)기법을 이용하여 해양플랜트를 구성하고 있는 장비 배치를 검증(Verification)할 수 있는 검증수행모델에 대한 연구이다. 해양플랜트 상부구조물(Topside) 유지보수 장비들을 엔지니어링하기 위하여는 Topside 장비 Layout검증이 선행되어야 한다. 하지만 입찰단계에서 완성도가 높지않는 FEED(Front End Engineering Design)결과물로 인한 많은 오류가 존재함에도 불구하고 검토시간의 부족 등의 이유로 검증을 수행하지 못하는 경우가 존재한다. 따라서 본 논문에서는 다학제간 접근방식인 시스템엔지니어링 프로세스를 간략화하여 적용함으로써 제한된 시간내 효과적으로 장비배치를 검증할 수 있는 검증수행모델을 제안하였다. 모델의 구성은 기능전개모델(Functional Deployment Model)을 통하여 구축하였으며 사례연구를 통하여 본 Topside 장비 배치에 대한 검증 수행모델을 검증하였다.