• Journal of Global Scholars of Marketing Science
• /
• v.16 no.1
• /
• pp.73-91
• /
• 2006

This study was conducted for market segmentation of cruise tourist according to launching the "T" in Busan. Benefit segmentation was used to identify attributes of cruise services; importance of ship's physical appearance and importance of service and activities. 24 attributes were distilled to 5 factors: 'Facility & Service', 'Atmospherics of cruise ship', 'Escape', 'Choice', 'Safety'. A K-means cluster analysis identified three clustered segments for five importance factors in which high loyalty customers were found to be the most important segment. Based on the findings, three distinct groups were formed: 'Moderators', 'High Loyalty', 'Spurious'. The most important factors by high loyalty groups were identified 'Safety', 'Facility & Service', 'Atmospherics of cruise ship', 'Choice', 'Escape' in order. The results of the study showed statistically significant differences among the three groups in terms of demographic and behavioral variables. Especially, the target market should be considered by 'High Loyalty' group and 'Moderators' group in order. Positioning strategies and marketing mix strategies for effectively targeting the segments were discussed.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.833-838
• /
• 2012

TDOA which is one of the position estimation methods is used on indoor positioning, jammer localization, rescue of life, etc. due to high accuracy and simple structure. This paper proposes the super-resolution TDOA estimator using MPM(Matrix Pencil Method). The proposed estimator has more accuracy and is applicable to narrowband signal compared with the conventional cross-correlation. Furthermore, its complexity is low because obtained data directly is used for construction of matrix unlike the MUSIC(Multiple Signal Classification) which is one of the well-known super-resolution estimator using covariance matrix. To validate the performance of proposed estimator, errors of estimation and computational burden is compared to MUSIC through software simulation.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.320-323
• /
• 2002

This paper presents a new generation of system for pressure vessel and shipbuilding. Typical pressure vessel and ship building weld joint preparations are either traditional V, butt, fillet grooves or have narrow or semi narrow gap profiles. The fillet and U groove are prevalently used in heavy industries and shipbuilding to melt and join the parts. Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be many hours. Although SAW and FCAW are normally a mechanized process, pressure vessel and ship structures welding up to now have usually been controlled by a full time operator. The operator has typically been responsible for positioning each individual weld run, for setting weld process parameters, for maintaining flux and wire levels, for removing slag and so on. The aim of the system is to develop a high speed welding system with multitorch for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. To achieve this, a laser vision sensor, a rotating torch and an image processing algorithm have been made. Also, the multitorch welding system can be applicable for the fine grained steel because of the high welding speed and lower heat input compare to a conventional welding process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1588-1595
• /
• 2021

Android-based smartphones receive the global navigation satellite system (GNSS) signals to determine their location and provide the GNSS raw measurement to users. The available GNSS signals on the current Android devices are GPS, GLONASS, Galileo, BeiDou, QZSS. This research has analyzed the performance of multi-GNSS position accuracy based on the pseudorange of the smartphone for maritime users. Smartphones capable of receiving dual-frequency are installed on a ship, and multi-GNSS raw information in maritime environment was measured to present the results of comparing the GNSS pseudorange-based dual-frequency positioning performance for each smarphone. Furthermore, we analyzed whether the results of the positioning performance can meet the HEA requirement of IMO for maritime navigation users. As the results of maritime experiment, it was confirmed that in the case of the smartphones supporting the dual-frequency, the position accuracy within 6 meters (95%) could be obtained, and the HEA position accuracy performance within 10 meters (95%) required by IMO could be achieved.

• Ocean and Polar Research
• /
• v.37 no.3
• /
• pp.235-247
• /
• 2015

The main purpose of procuring the oceanographic research vessel with state-of-the-art technology is to provide a floating laboratory to conduct field work on the global oceans. The vessel should be properly utilized to locate and evaluate unexplored natural resources as well as to contribute international efforts to better understand and manage global environmental issues. Top priorities in the vessel design are high safety standards, noise and vibration control efficiency, and effective application of research equipment. For the accomplishment of all activities, the vessel length over all should be extended ~100 m with a gross tonnage of ~5,900 ton. In particular, the dynamic positioning system II will essentially operate at sea state 6. The high efficiency emissions reduction system will also be adopted in preparation for entry into force of 3rd exhaust emission control (Tier III). About 130 navigational and scientific instruments will be installed. The final design and model test of the new research vessel were reviewed and completed, respectively, in 2014. Currently, the ship is being built on schedule and expected to be delivered in December 2015. Within the near future, the new vessel will assume the role of carrying out multidisciplinary oceanographic researches of the highest standards in a technologically advanced and environment friendly manner.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.724-727
• /
• 2007

선박 운항 자동화 시스템은 선내 노동력 감소, 작업 환경 개선, 운항 안전성 확보 및 운항 능률의 향상을 목표로 하며, 궁극적으로는 운항 경제성확보를 위한 승선 인원의 최소화에 그 목적이 있다. 최근에는 적응 제어방법 등을 응용하여 선박의 비선형성을 보상하여 선박의 회두각 유지제어(Course Keeping Control), 항로 추적제어(Track Keeping Control), 롤-타각제어(Roll-Rudder Stabilization), 선박 위치제어(Dynamic Ship Positioning), 선박자동 접이안(Automatic Mooring Control) 등에 관한 연구를 수행하고 있으며 실제의 선박으로 대상으로 응용연구가 진행 중이다. 선박은 Steering Machine에 의해 조정되는 Rudder angle과 선박의 회두각의 관계는 비선형적이며, 선박의 Load Condition은 선박의 Parameter에 영향을 주는 비선형적인 요소로서 작용한다. 또한 외란요소인 파도의 유속(流速)과 방향, 풍속과 풍량 등이 비선형적인 형태로 작용하므로 선박의 운항을 힘들게 하는 요인이 된다. 따라서 선박의 운항시스템에는 비선형성을 극복할 수 있는 강인한 제어 알고리즘을 요구한다. 본 논문에서는 퍼지 알고리즘을 이용하여 선박의 비선형적인 요인 및 외란을 극복할 수 있는 선박의 자율운항 시스템을 설계하고 시뮬레이션을 통해 그 결과를 살펴보았다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.221-225
• /
• 1995

Unauthorized users cant acquire and enough accuracy in applications of the navigation or geodesy by the single GPS positioning technique because of the measurement errors and US DoDs intentional errors. The solution of these restrictions is the Dgps technique that is to eliminate the common errors between the reference station and the desired point and can achieve a high accuracy. DGPS postprocessing system is implemented by using the offset distances between the known position of a reference station and the position obtained from GPS satellite data. The preliminary experiments include static tests and a dynamic test of cruising a ship.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.93-98
• /
• 2007

As coffee's taste and scent are emphasized, and interior atmosphere has changed along with sale of brand's own products, there are also epochal trend changes in interior. So, changes within the space should be focused onto open type self coffee shop, a new cultural space distinguishable from existing coffee shops. Therefore, in this study, the following results could be obtained by performing customer-centered, spatial structural characteristics research on 5 take-out coffee shops opened after 2005 that are practicing self service in Busan and Gyeongsangnam-do regions. In this study, it was shown in the above results that location of the entrance, kitchen, and condiment bar, area per person, size and positioning of furniture, area of windows and doors, etc have strong influences for self service which customers themselves carry their food. Therefore, in planning the interior of self coffee ship in the future, presentation of more effective and practical space based on this analysis will be required.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.659-666
• /
• 2009

Recently, there are several problems in space, contiguity and facility of the existing harbors issued due to the trend of enlarging the container capacity of the large container vessel, the Mobile Harbor has been proposed conceptually as an effective solution for those problems. This concept is a kind of transfer loader of the containers from the large container ship, which is a floating barge with a catamaran type in the underwater part, and so prompt maneuverability and work effectiveness. For the safe mooring of two floating bodies, a container and the mobile harbor, in the near sea apart from the quay, a robot arm mooring facility specially devised would be designed and verified through comparison study under various environmental sea condition in the inner and outer harbor. DP system (Dynamic Positioning System) using the azimuth thruster and a pneumatic fender, etc, will be considered as a next research topic for the mooring security of multi-body floaters.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.53-62
• /
• 1998

Accuracy of positions by GPS receiver at Tongyoung Port were measured and analysed in order to get more credible information on GPS positioning for vessels. Positions were automatically recorded every 5-Min from 1st October, 1997 to 30th of November, 1997 by two identical GPS receivers at the Laboratory of Navigation in the College of Marine Science, Gyeongsang University ($34^{\circ}$ 49' 57.985"N, $128^{\circ}$ 24' 06.562") and at the training ship "Gyeongyang" alongside in the tongyoung passenger port ($34^{\circ}$ 50" 10.080"N, $128^{\circ}$ 25' 16.415") as fixed positions. The results are as follows ; 1. Number of the usable satellites observing Zenith angle between $9^{\circ}$ and $82^{\circ}$ was normally 4 during a day 24 hours except for 3 hours with total Number 20. 2. Accuracy of position with time was widely dispersed around center of standard position as well as directional deviation around mean position. 3. Specific error of GPS receiver showed a little deviation by alternative measurements for consecutive 5 days at each fixed position respectively. 4. Accuracy of GPS position at 2 fixed positions of Tongyoung port was revealed 27.2 m as minimum value while normal accuracy for all day could be less than 50 m.