• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.29-43
• /
• 2008

As the containership has been large-sized, it is important to analyze the social feasibility for the dredging the water-depth of Busan port. We tries to do an exploratory study to analyze the needs of the core port user group by using the survey methodology. We did the survey for the ocean carriers, terminal operating companies, ship pilots respectively. Collected data was analyzed by frequency and cross tabulation method. Result suggests that the Busan North Port should be dredged to the 16 meter depth and Busan New Port should be dredged to the 17 meter depth. And the priority of the depth dredging is ranked as Gamman pier, Sinsundae pier, New Port and Jasungdae pier.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.179-188
• /
• 2009

WIG crafts are a high speed vessel with features of dynamic supported craft. These crafts, which are predominantly of light weight and operate any substantially greater speeds than conventional craft such as bulk carrier, tanker, container ship, etc., could not be accommodated under traditional maritime safety instruments. It means that there is the need for risk and safety levels to be assessed on a holistic basis, recognizing that high levels of operator training, comprehensive and thoroughly implemented procedures, high levels of automation and sophisticated software can all make significant contributions to risk reduction. To response this requirement, the Interim Guideline for WIG craft(MSC/Circ.1054) were developed in the view of the configuration of WIG craft, which fall between the maritime and aviation regulatory regimes. This paper reviews a safety assessment process and methodology to be used in the design phase of a new ship. The process and methodology is based on the risk-based approach and is applied to safety assessment in concept development phase of small WIG craft in the 20-person class.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1927-1933
• /
• 2006

This paper proposes the implementation plan of information network for an E-Navigation. Firstly, It configures to the network system based on E-Navigation information network using information and communication technology. And then, it builds on the total port network and tuning up the maritime traffic support system. It will expect to the efficiency through information network between ship to ship related pen operator. Building of information network for the E-Navigation, it is to build on the wireless internet infrastructure for the port logistics and traffic safety.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.10-17
• /
• 2010

In a passive sonar, the improvement of detection performance by using noise cancellation is usually a important problem. In this paper, we have analyzed the own-ship noise cancellation in the two operation modes which are used in the HMS system. In the operator mode, an adaptive line enhancer(ALE) is applied to improve the tonal detection by using broadband noise cancellation and the normalized least mean square(NLMS) algorithm is applied to the design of an adaptive filter. The reference input that is correlated with a primary input can be used to remove the noise incident on the observation directionin the automatic mode. Computer simulations with real sea that data show that the proposed adaptive noise canceller has good performance in passive detection under HMS operation.

• Journal of Korea Port Economic Association
• /
• v.36 no.2
• /
• pp.63-86
• /
• 2020

The tax lease scheme for ships is an advanced ship financing tool that generates tax benefits through accelerated depreciation of capital allowances and transferring them to the ship operator (leasee) via reductions in rental payments. The scheme was introduced by Japan in 1978 and by France in 1998 to support their shipping and shipbuilding industries. The size of tax benefits varies by country depending on the depreciation rate for ships, corporate tax rate, and the tax system on profits from the sale of ship. This study uses a virtual model of the Korean tax lease scheme for ships based on the French tax lease scheme. The size of tax benefits is calculated and compared to those in the French and Japanese tax lease schemes. According to the analysis, the size of the tax benefit was approximately 19% for France, 14% for Japan, and 12% for Korea. This is differentiated by the country's depreciation rate and corporate tax rate, which have the greatest impact on the size of tax benefits. For the Korean virtual model, if the tax benefits are distributed by the operator and the investor at the rate of 75:25, the operator is expected to enjoy tax benefits equivalent to about 9% of the ship price and the investor to enjoy 3%. Despite limited information and data regarding the tax lease scheme for ships, this study was the first attempt in Korea to design a virtual model of the Korean tax lease scheme based on some predictable assumptions. Therefore, a group of shipping, financing, and legal experts will follow up on more professional and practical reviews of the model in the near future. Hence, this study will serve as a small contribution to the early introduction of the Korean tax lease scheme for ships.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.65-72
• /
• 2005

The expected demands for the new styling design can be studied by examining the recent deliveries and the new buildings on order. These ships are setting the trend for the operation of passenger ships. There has been a rapid increase in size and produce of ship some remarkable exterior design image. These ships follow very similar design concept, even if their operator compete with each other in the same market. But also new innovative design solution have been introduced to catch the interest of the passengers. The propose of this study is to investigate the exterior styling design in passenger ships, which result form examining the exterior elements such as funnels, pods, hulls, trademark, colours, flowing curvilinear lines and from. Each different passenger ship lines require different design style for different markets, while ships of different sizes and categories obviously require different solution. When a new class is created later, key design element will be retained, with some items being changed and new ideas introduced.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.62-67
• /
• 2004

Many ships in voyage experience weight and buoyancy distribution change by various reasons such as change of sea water density and waves, weather condition, and consumption of fuel, provisions, etc . The weight and buoyancy distribution change can bring the ships out of allowable trim, heeling angle. In these case, the ships should adjust trim and heeling angle by shifting of liquid cargo or ballasting, deballasting of ballast tanks for recovery of initial state or for a stable voyage. But, if the adjustment is performed incorrectly, ship's safety such as longitudinal strength, intact stability, propeller immersion, wide visibility, minimum forward draft cannot be secured correctly. So it is required that the adjustment of trim and heeling angle should be planned not by human operators but by optimization computer algorithm. To make an optimized plan to adjust trim and heeling angle guaranteeing the ship's safety and quickness of process, Uk! combined mechanical analysis and optimization algorithm. The candidate algorithms for the study were heuristic algorithm, meta-heuristic algorithm and uninformed searching algorithm. These are widely used in various kinds of optimization problems. Among them, heuristic algorithm $A^\ast$ was chosen for its optimality. The $A^\ast$ algorithm is then applied for the study. Three core elements of $A^\ast$ Algorithm consists of node, operator, evaluation function were modified and redefined. And we analyzed the $A^\ast$ algorithm by considering cooperation with loading instrument installed in most ships. Finally, the algorithm has been applied to tanker ship's various conditions such as Normal Ballast Condition, Homo Design Condition, Alternate Loading Condition, Also the test results are compared and discussed to confirm the efficiency and the usefulness of the methodology developed the system.

• Journal of Navigation and Port Research
• /
• v.30 no.4
• /
• pp.291-294
• /
• 2006

Corrosion is never avoided in the use rf materials with various environments. The underwater hull is normally protected against rusting by several coatings of anti-corrosive paint. The purpose of ICCP(Impressed Current Cathodic Protection) system is to eliminate the rusting or corrosion, which occurs on metal immersed in seawater. This thesis is about the ICCP control and monitoring system, which brings protection against the corrosion of the ship's hull in the sea environments. The test system for ICCP is composed of a power supply, anode, reference electrode and controller. The test system is composed power supply, anode, ref electrode, shunt and etc. The protection current is sent to the protection area though anode. Reference electrode senses whether or not the detected potential is within a range of protection of test equipment and then it is automatically controlled to increase or decrease the amount of protective current to be sent to the anode by controller. The monitoring system with LabView is also detected in order to check the normal state of the system at operation period, because an operator does not always watch over this system and thus the system cannot operate well because rf his or her negligent management. This paper was studied the variation of potential and current density with environment factors, velocity and time, and the experimental results will be explained Also, It is suggested that this system can accommodate a ship's automation for SCMS(Ship Control and Management System) and will be very useful.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.587-593
• /
• 2020

The securing safety of ferry ships on the domestic coast is evaluated by comparing the external force applied and the securing device based on the cargo weight and hull acceleration that can exist at the loaded position. The hull acceleration based on the domestic standard, which is the basis for securing safety evaluation, is applied without reflecting the characteristics of the ship and the sailing conditions. In this study, a total of 12 acceleration measurements were performed at four points of the hull of a ship with a DWT 6,800 ton class 15.5 knots passing through Busan-Jeju to analyze the hull acceleration of the domestic coastal ferry ship. Data were collected for the buoy. For a theoretical comparative analysis of the limited measurement results, the response amplitude operator (RAO) was analyzed through frequency-response analysis by numerical simulation, and acceleration analysis for the four points was performed using the RAO results. Based on the acceleration comparison, differences in the degree of each position were observed, but in the case of the Y-axis acceleration, the analysis was 1.81 m/s², and the measurement was 1.47 m/s². The analyzed simulation result was as high as 0.34 m/s². Moreover, analysis was performed at 22 % level, and measurement at 18 % level.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2002

A correctly designed bridge offers improved operational safety in terms of increased vigilance, flexibility of operation, precision of control and operator＇s situational awareness. According1y to design human centered bridge, the consideration shall be given to the man-machine interface, location and interrelation of workstation, configuration of console, windows. field of vision and bridge working environment. The state-of-the-art suits for one-man operation by integration of conning information and central information presentation. Further, it is desirable to enable two man ship operation for emergency operations, training purposes and redundancy. In this point of view, this thesis would like to design a conceptual bridge.