• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.187-190
• /
• 2010

최근 육상에서는 정보화가 급속히 진행됨에 따라 스마트폰과 PDA와 같은 모바일 디바이스가 널리 보급되어 일상생활에서 매우 중요한 위치에 있다. 그러나 선박에서는 이에 필요한 설비와 서비스 등 통신망에 한계가 있어서 정보화와 동떨어진 상태로 방치되어 있다고 하여도 과언이 아니다. 현재 항해 중 외부와의 접속은 위성을 통하여 이루어지고 있지만, 높은 과금으로 인해 고속의 통신은 이루어지지 못하고 저속의 데이터 전송만 가능하다. 선내에 LAN이 구축되어 있지 않기 때문에 한정된 선원만이 한정된 공간에서 인터넷을 약간 이용하는 정도여서 네트워크의 구축이 필요한 실정이다. 본 논문에서는 선내의 LAN 구축으로 보다 용이한 접속과 각 선실간의 네트워크를 구성하여 작게는 일반 선박부터 크게는 크루즈까지 선원들과 고객들의 정보화 욕구를 충족시킬 수 있는 기본적인 환경의 조성이 필요하여 선박 내 통신망 구성을 위한 네트워크 설계에 대해 제안하고자 한다.

• Journal of Ship and Ocean Technology
• /
• 제4권2호
• /
• pp.38-57
• /
• 2000

This paper deals with reliability analysis of specially orthotropic plates subjected to transverse lateral pressure loads by using Monte Carlo simulation method. The plates are simply supported around their all edges and have a low short span to plate depth ratio with rectangular plate shapes. Various levels of reliability analyses of the plates are performed within the context of First-Ply-Failure(FPF) analysis such as ply-/laminate-level reliability analyse, failure tree analysis and sensitivity analysis of basic design variables to estimated plate reliabilities. In performing all these levels of reliability analyses, the followings are considered within the Monte Carlo simulation method: (1) input parameters to the strengths of the plates such as applied transverse lateral pressure loads, elastic moduli, geometric including plate thickness and ultimate strength values of the plates are treated as basic design variables following a normal probability distribution; (2) the mechanical responses of the plates are calculated by using simplified higher-order shear deformation theory which can predict the mechanical responses of thick laminated plates accurately; and (3) the limit state equations are derived from polynomial failure criteria for composite materials such as maximum stress, maximum strain, Tsai-Hill, Tsai-Wu and Hoffman.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.825-831
• /
• 2023

The propellers used for big ships have a large diameter and are very heavy. In order to apply a precise and safe work process to them, it is necessary to use an exclusive turning system. For this reason, various techniques are applied to produce them. However, workers' convenience and safety are not taken into consideration enough at production sites. Conventionally, these propellers are designed to be separated as their turning system is loaded and rotated by empty weight. Therefore, it is necessary to replace such a design. This study tries to find the weaknesses of the design and structure of a conventional propeller turning system for large ships, to verify structure integrity of a structure in structural analysis, and to devise a plan for designing a new type of turning system. In the basic concept design and structural analysis for the turning system used in the propeller finishing process for large ships, this study drew the following conclusions. It was possible to develop the work process of the turning system for the propeller finishing process used for large ships, to obtain the dimensions for exterior design through a basic design. Structural analysis was conducted to find the structure integrity of the turning system. As a result, in the rail installed to transfer a gantry, the maximum stress was about 45MPa, about 5.5 times lower than the yield strength 250MPa. Therefore, the turning system was judged to be safe structurally.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.14-21
• /
• 2007

A passenger ship is consist of five(5) constituents; passenger, sea, crew, port and ship itself and the rule & regulation which is applicable to passenger ship are differently required as their objects of constituents. the basic concept of rule & regulation can be defined all activities to keep safety of ship and her constituents. Especially, the rule & regulation for passenger ship design and construction shall be considered not only safety of ship itself but also safety of lives, so its are required more severe than commercial vessel. Recently, the IMO have finished the rule making work on the 'passenger ship safety' since it has been discussed last 2000 and next MSC meeting will be adopted the results. In this paper, the application method of rule & regulation are treated and the new rule which were made by IMO are introduced. The rule & regulation for passenger ship is one of the most important things. therefore, it is required to careful consideration to apply on the rule application.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1155-1160
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring ship on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method such as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kinds of sensors such as three dimensional accelerator, two dimensional tilt sensor, two displacement sensors and azimuth sensor. Using the this measuring system, it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing such as rolling, pitching, yawing, sway, heave, surge under the external forces.

• 해양환경안전학회지
• /
• 제3권S1호
• /
• pp.55-73
• /
• 1997

It is well known that simulation study in the preliminary design stage of harbors or berths is of great use, since it can provide helpful informations to the designer from the view point of ship navigations. In this paper, a brief review is made in the safety assessment of ship navigation for a 320,000 DWT VLCC entering Yecocheon harbor area, which is carried out by shiphandling simulator system. The geographic data base for the harbor as well as the mathematical models of the ship and environmental effects are designed and developed. Based in the on-site inspections and interviews with pilots in Yeocheon area, basic maneuvering plans and consistence with real operation conditions. Berthing and deberthing maneuvering simulations as well as approaching and departing simulations are carried out by 3 experienced navigators according to the maneuvering plans and environmental scenarios. The simulation results are analysed in various ways to evaluate the quantitative and qualitative maneuvering difficulties and thereby to assess the safety of ship navigation in that area.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 추계학술대회
• /
• pp.149-150
• /
• 2022

항만 계류시설에 작용하는 접안력은 접안에너지에 근거하여 계산하게 된다. 접안력을 결정하는 절대적인 요소로서 현장에서 안전한 도선을 위해 주의해야 할 것이 바로 '선박접안속도'이다. 본 연구에서는 선박접안속도 관련 국내외 동향을 살펴보고, 안전하고 효율적인 부두설계 및 도선운영을 위한 기초자료로 활용하고자 국내부두에서 접안속도 실측데이터를 통계적 수단 및 알고리즘을 통해 분석하였다.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.227-233
• /
• 2005

In order to estimate the effective horse power(EHP) in towing net of a bottom trawl ship, the ship's resistance was calculated by using a series data of Yamagata and Wigley formula. Also the effective horse power for a ship(EHPs) was estimated versus the ship speed in sailing and the propulsive efficiency was calculated with the brake horse power and the effective horse power. Then the effective horse power for a ship and a trawl net were estimated in the application of the propulsive efficiency in towing net. The total effective horse power($EHP_T$) was average 187.6kW and the effective horse power for a 1.awl net($EHP_n$) was average 176.7kW at a smooth sea state in towing net. The ratio of $EHP_n$ to $EHP_T$ was about 94.0% and the value was higher slightly than was already informed at a smooth sea state. The power for keeping up a townet speed was required more about 20% of a maximum continuous power at a rather rough sea state than a smooth sea state. In the future, if the residual resistance is considered with a sea state, $EHP_n$ will be estimated more correctly Also the data of EHP estimated by this method will be used as the basic data to design a trawl net.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.19-27
• /
• 2017

In spite of adoption of Intact Stability Code Part A as mandatory, the accidents have been occurred frequently caused by dynamic stability. Therefore International Maritime Organization (IMO) is revising the Intact Stability Code to prevent the cause of accidents. The result of 4th meeting of Sub-committee on Ship Design and Construction (SDC), five mode of the cause was defined and establishing each draft regulations. We consider physical background, mathematical description, draft regulations for five failure mode and sample calculations for ships built by STX Offshore & Shipbuilding.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.96-104
• /
• 2018

함정은 다양한 탑재장비들과 함정 플랫폼이 통합되어 성능을 발휘해야 하는 복합 무기체계이면서, 장기간의 획득기간이 소요되고 시제품이 바로 전력화 되어야 하는 특징으로 인해 독자적인 개발프로세스를 적용해 왔다. 그러나 최근 기술의 발전과 탑재장비의 복잡화에 따라 함정 획득 분야에도 시스템공학(SE) 절차의 적용이 필수불가결하게 되었다. 그럼에도 불구하고 함정 설계에서 아직까지 SE 절차는 기존의 절차와 융합되지 못하고 별도의 체계로 관리되고 있는데, SE 절차를 반영한 실질적인 통합 프로세스가 아직 정립되어 있지 않기 때문이다. 다양한 함정에 대해 SE 절차의 적용 및 설계 방법 개선 연구가 수행되었으나 통합 측면에서 성과는 부족하였다. 따라서 함정을 설계할 때 적용할 수 있는 SE 기반 통합 프로세스 연구가 필요하다. 본 논문에서는 기존 기본설계 프로세스와 SE 기반 프로세스의 통합을 통해 잠수함 기본설계 프로세스를 정립하였다. 이를 위해 함정 기본설계와 병행하여 SE 기반의 기술검토인 체계요구조건검토(SRR), 체계기능검토(SFR), 기본설계검토(PDR)을 수행하는 방법론을 제시하였다. 그리고 체계요구사항명세서(SSRS), 체계/부체계규격서(SSS), 체계/부체계설계기술서(SSDD) 등의 요구사항 문서들의 생성 및 관리를 위한 효율적인 프로세스를 연구하였다. 이러한 2가지의 프로세스를 통합하여 개선된 SE 기반 기본설계 프로세스를 구축하였다. 구축된 프로세스의 적용성을 평가하기 위하여 현재 기본설계를 진행중인 잠수함에 적용한 결과를 제시하였다. 이를 통해 잠수함의 효과적인 요구사항 관리, 산출물 작성 및 설계반영이 가능하였고, 요구사항과 추적성을 가진 각각의 산출물은 기본설계 시험평가 자료로도 즉각적으로 활용이 가능함을 확인하였다. 잠수함 이외에도 건조중인 다양한 함정 설계에서도 본 연구의 SE 기반 함정 기본설계 프로세스의 유용성이 기대된다.