• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2017

As a preliminary study of enter or leaving traffic patterns of the Korea main port, port Management Information System (Port-MIS) data was used to check the volume of vessels entering and leaving the port of Busan, and three consecutive days from each seasons were selected for study. Selected 12-day General Information Center on Maritime Safety & Security (GICOMS) data was also used to analyze the traffic pattern in the main traffic lane of Busan port for dangerous goods carrier. Also, the distance between dangerous goods carriers and Oryukdo breakwater of east breakwater in the main traffic lane was analyzed. Collision probability was estimated using the cumulative probability distribution function of the normal distribution for the maritime traffic safety audit scheme based on the assumption that a ship's trajectory has a normal distribution for a section of the route. However, in case of entry or leaving thorough the Oryukdo breakwater and entry thorough the east breakwater, ship's sailing trajectories were revealed not to follow a normal distribution via regularity testing using a KS-test and SW-test. Especially in the north port, the tendency of the right side of the ship to pass was remarkable. It is desirable to develop a traffic model suitable for the characteristics of the port rather than to apply general traffic theories, and to apply this model to a maritime traffic safety diagnosis, so further research is needed.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.478-485
• /
• 2018

Aids to Navigation (AtoN) is one of the marine traffic safety facilities that promotes the safety of maritime traffic and enhance ship's operational efficiency. However, functional failure of AtoN due to ship's collision or bad weather conditions leads to inconvenience or navigational risk to various users such as the ship operators. For insstance, the largest container port in Korea, Busan Port has experienced a total of 400 AtoN accidents in the past 12 years (2006-2017).Therefore, an average of 20.6 days of recovery time is required, which increases the maritime safety anxiety for AtoN users. is the objective of this study was to present the quantitative support of the users for the prevention of AtoN accidents and the improvement of the feasibility of implementing more efficient management in Korea. A survey was conducted on the users of Busan port areas to investigate general perception of AtoN in general and the accidents that have happened, and to estimate the economic value of navigational risk reduction by implementing effective AtoN management measure. Using the representative non-market valuation method for environmental or public goods known as contingent valuation method (CVM), the economic value granted to users for the AtoN services in Busan port was estimated to at least 16 billion won. Therefore, these finding could be used by AtoN managers and/or policy makers as a valuable data to identify the users' need of various AtoN services including Busan Port and to establish and implement more efficient management plan.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.119-123
• /
• 2016

In the coastal area, many kind of vessels are operating and exposed to the various marine accidents. In particular, small-size vessels, which are not equipped with the safety equipment, are in the defenceless state to the marine accidents such as the accident according to vessel's own state caused by the diverse reasons and the collision with the neighborhood vessels and objectives. So it is necessary to resolve these situations through the inexpensive equipment. This paper implements the function that can detect vessel's own motion using Smart Phone. if the motion is over the threshold value assigned, this function decides that the current situation is dangerous for this vessel. So this function informs Smart Phone's ower in the vessel and the control center of this situation. This function can be applied to small-size vessels, such as fishing boating, passenger ship, and leasure boat, which have few the safety equipments, and then improve vessel's safety navigation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.474-482
• /
• 2021

An average of two to three typhoons that occur in the Philippines or Taiwan pass through Korea each year owing to the influence of the geographical location and western winds. Because Jinhae Bay is known as Korea's representative typhoon refuge, it is filled with ships during typhoons and later becomes saturated with ships anchored to the surrounding routes. If a strong wind drags an anchored ship, a collision accident may occur because of the short distance between the ships. Therefore, a systematic anchoring safety management of Jinhae Bay is required. In this study, the minimum wind speeds of a dragging anchor based on the water depths of Jinhae Bay anchorages were investigated. When 7-9 shackles were given, the minimum wind speeds were 48-63, 46-61, and 39-54 knots at depths of 20, 35, and 50 m, respectively. As the water depth increased, the length of the cable laid on the sea bed became shorter than 5 m owing to the external force, and the minimum wind speed showed a significant difference of 4-8 knots. In addition, ships with high holding power anchors (AC-14 type) had higher minimum wind speeds than ships with conventional anchors (ASS type). Finally, it was confirmed that at a depth of 50 m, dragging easily occurred even when a high holding power anchor was applied.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.69-76
• /
• 2011

According to the related reports, about 60 percents of ship collisions have resulted from operating mistake caused by human factor. Specially, the report said that negligence of observation caused 66.8 percents of the accidents due to a human factor. Hence automatic detection and tracking of an object from an IR images are crucial for safety navigation because it can relieve officer's burden and remedies imperfections of human visual system. In this paper, we present a method to detect an object such as ship, rock and buoy from a sea IR image. Most edge directions of the sea image are horizontal and most vertical edges come out from the object areas. The presented method uses them as a characteristic for the object detection. Vertical edges are extracted from the input image and isolated edges are eliminated. Then morphological closing operation is performed on the vertical edges. This caused vertical edges that actually compose an object be connected and become an object candidate region. Next, reference object regions are extracted using horizontal edges, which appear on the boundaries between surface of the sea and the objects. Finally, object regions are acquired by sequentially integrating reference region and object candidate regions.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.217-219
• /
• 2006

This study focused an water quality response to land-based pollution loads and the appropriate pollutant load reduction in Chinhae Bay using an eco-hydrodynamic model. Land-based discharge foam urban areas, industrial complex and sewage treatment plant was the greatest contributor to cause red-tide blooms and summer hypoxia. Tidal currents velocity af the ebb tide was about 10 cm/s stronger than that of the flood tide. A residual current was simulated to. have a slightly complicated pattern with ranging from 0.1 to. 2.7 cm/s. In Masan Bay, pollutant materials cannot flaw from the inner to the outer bay easily because af residual currents flaw southward at surface and northward at the bottom. The simulation results of COD distribution showedhigh concentrations aver 3 mg/L in the inner part of Masan Bay related pollutant discharge, and charge, and lower levels less than 1.5mg/L in the central part of Chinhae Bay. For improvement water quality in Chinhae Bay, it is necessary to reduce the organic and inorganic loads from paint sources by mare than 50% and ameliorate severe polluted sediment.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.48-55
• /
• 2010

The many vessels are built with FRP(Fiber-Reinforced Plastic) material for small boats and medium vessels. However, FRP is impossible to be used for recyclable material owing to environmental problems and causes large proportion of collision accidents because radar reflection wave is so weak that large vessels could not detect FRP ships during the sailing. Hence, Al alloy comes into the spotlight to solve these kinds of problems as a new-material for next generation instead of FRP. Al alloy ships are getting widely introduced for fish and leisure boats to save fuel consumption due to lightweight. In this study, it was selected 6061-T6 Al alloy which are mainly used for Al-ships and carried out various electrochemical experiment such as potential, anodic/cathodic polarization, Tafel analysis, potentiostatic experiment and surface morphologies observation after potentiostatic experiment for 1200 sec by using the SEM equipment to evaluate optimum corrosion protection potential in sea water. It is concluded that the optimum corrosion protection potential range is -1.4 V ~ -0.7 V(Ag/AgCl) for 6061-T6 Al alloy, in the case of application of ICCP(Impressed current cathodic protection), which was shown the lowest current density at the electrochemical experiment and good specimen surface morphologies after potentiostatic experiment for Al-Mg-Si(6061-T6) Al alloy in seawater environment.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.47-52
• /
• 2005

It have been known that the probability of accidental happening in towing-barge is higher than that of other merchant vessels. Because the towing-barge is restricted in thier manoeuvring ability due to its towingline. A report from ministry maritime affairs and fisheries said that the rate of collision accident for towing-barge is $40\%$ high than other transport system in sea A number of researches have been carried out to improve the safety policy in the towing-barge sen transportation system by the gorvernment This study examined the safety status in domestic towing-barge sen transportation system The registration status, safety operational policy and post accidental data were also examined. A survey research of experts relating to towing-barge operation also was carried out to find the detailed of safety status. This study would be applicable to set up safety policy for towing-barge marine transportation system.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.34
• /
• pp.77-108
• /
• 2007

The traditional name given to the insurance of third party liabilities and certain contractual liabilities which arise in connection with the operation of ships is protection and indemnity(P & I) insurance. P & I insurance is very different from traditional hull and machinery insurance in that shipowners' hull and machinery insurance is designed primarily to protect the assured against losses to his vessel, whereas P & I insurance seeks to indemnify an shipowner in respect of the discharge of legal liabilities he has incurred in operating his own vessels. This study is to examine the background of establishment of British P & I clubs md, therefore, the identity of P & I insurance. The present British P & I clubs are the remote descendants of the many small and local hull mutual insurance clubs that were formed by British shipowners in the end of 18th century. At that time, British shipowners were dissatified with the state of marine insurance market and, therefore, established clubs together in mutual hull insurance clubs. After the removal of the company monopoly in 1824, greater competition had a good effect on the rates, terms of cover and service offered by the commercial marine insurance market and by Lloyd's underwriters, and the hull clubs became less necessary and went into decline. The burden of British shipowners on liabilities to third parties was steadily increased after the middle of the 19th century, but the amount insured under hull policy was limited in the insured value of the ship. Eventually, the first protection club, that is, the Shipowners' Mutual Protection Society was formed in 1855. It was designed to like past mutual hull clubs, but to cover liabilities for loss of life and personal injury and also the collision risks excluded from the current marine policies, particularly the excess above the limits in hull policies. In 1870, the risks of liability for loss of or damage to cargo carried on board the insured ship was first awarded by the British shipowners. After 1874, many protection clubs formed indemnity club to cover the risk of liability for loss or damage to cargo. As mentioned above, British P & I clubs have been steadily changed according to the response of shipowners under the rapidly changing law of British shipowners' liability, and so on in the future.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.