• 수산해양기술연구
• /
• 제28권1호
• /
• pp.21-26
• /
• 1992

Generally a navigator evaluated the maneuverability of his ship by the scale of turning circle which was described only by the largest rudder angle of the port and starboard sides. But to have the sufficient knowledge of his ship's maneuvering characteristics he should consider the data about the new course keeping test, the spiral test, and the turning circle tests in accordance with the rudder angles together. In this paper the author performed the above tests to study the maneuverability of the stern trawler M.S. Pusan 404 which is a training ship of the National Fisheries University of Pusan. The obtained results are summarized as follows: 1. When the rudder angles being 5。, 10。, 20。, 30。, 35。 the advances of the starboard side turning circles were 12.8, 8.2, 4.8, 2.9, 2.7 times as large as the length of the ship, and of the port side turning circles were 13.3, 8.7, 5.4, 3.5, 2.9, time as large as the large as it. Under the same conditions the tactical diameters were 15.1, 9.7, 5.2, 3.1, 2.8 times as large as the length of the ship, for starboard side, and 17.2, 12.4, 6.4, 3.7, 3.2 times as large as it for port side. 2. As the rudder angle being increased the ratio of the advance to the tactical diameter was nearly 1 and her obeying ability was better than that of the small angle. 3. The mean values of the rates of speed reduction during the steady turning motion were 0.96, 0.92, 0.82, 0.71, 0.65 in accordance with the rudder angles. 4. The relative formulas between the distance to the new course y and the altering course x were as follows: When rudder angles being 10。, 20。, 30。, y=52.2222+1.6133x, y=48.750+0.9383x, y=39.250+0.655x respectively. 5. There was little difference of the distance to the new course between rudder angle 20。and 30。, and so it is desirable for a navigator to a navigator to use the small rudder angles unless sudden emergencies. 6. Though her rudder angle being small her course stability was good according to the spiral tests.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.285-294
• /
• 2015

As a "kind of" mature ship form, planing hull has been widely used in military and civilian areas. Therefore, a reasonable design for planing hull becomes more and more important. For planing hull, resistance and trim are always the most important problems we are concerned with. It affects the planing hull's economic efficiency and maneuverability very seriously. Instead of the expensive towing tank experiments, the development of computer comprehensive ability allows us to previously apply computational fluid dynamics(CFD)to the ship design. In this paper, the CFD method and Goal Driven Optimization (GDO) were used in the estimations of planing hull resistance and running attitude to provide a possible method for performance computation of planing hull.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.848-872
• /
• 2015

Hydrodynamic derivatives or coefficients are required to predict the maneuvering characteristics of a marine vehicle. These derivatives are obtained numerically for a DTMB 5512 model ship by virtual simulating of captive model tests in a CFD environment. The computed coefficients are applied to predict the turning circle and zig-zag maneuvers of the model ship. The comparison of the simulated results with the available experimental data shows a very good agreement among them. The simulations show that the CFD is precise and affordable tool at the preliminary design stage to obtain maneuverability performance of a marine vehicles.

• 한국항해학회지
• /
• 제24권3호
• /
• pp.123-132
• /
• 2000

In order to improve the ship maneuverability, It is important to estimate precisely the hydrodynamic coefficients of added mass forces acting on a ship especially in shallow waters, and simple methods for predicting such hydrodynamic forces Is also very desirable. In the previous paper using 3-Dimension potential flow theory, it has been demonstrated that potential calculation is available to estimate added mass coefficients. The present work is aimed at the suggestion of the simplified formulas for predicting the translation and lateral motion of added mass coefficients in shallow water. So, 3-D potential flow theory is also used to calculate the added mass coefficients in deep and shallow waters for Series 60 model which has 5 different kinds of block coefficients (0.6-0.8), SR196 model and T/S HANNARA. After some series computation, simplified formulas for Predicting the added mass force in shallow waters is suggested based on the computation results of Series 60 model. The formulas consist of the combination of principal dimensions and the water depth; d/B, Cb, d/H. The predicted results are compared with the Computation results for SR196 model and T/S HANNARA. The precision of predicted results by simplified formulas are good enough for the practical use. (d/B : draft-Breadth ratio, d/H draft-Water depth ratio, Cb : Block coefficients).

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.428-434
• /
• 2011

To establish a vessel safety management system for improving the safety of vessel's traffic and preventing vessel's traffic accidents, the state of marine traffic in the Busan South Port was investigated and analyzed as preliminary survey of the countermeasures. As a result of the study, there are 1,158 vessels in a day, 48 vessels in an hour, and the maximum traffic is about 118 vessels between 16:00 and 17:00 hours everyday, which requires to establish and operate a traffic control system necessarily for ensuring vessel's traffic safety. Furthermore, passages of tanker, passenger ship, cargo vessel and government vessel showed to sail along main traffic lane to be obtained enough sea depth at the survey area. However, passages of fishing vessel and launch showed to sail freely at all survey area owing to outstanding maneuverability and a shallow draft. Some vessels of launch sailed along main traffic lane, but other vessels crossed to sail it. The passages to cross main traffic lane is higher the risk of collision. Therefore, safety measures are urgently needed for the operation of the Busan South Port management system and the prevention of marine pollution.

• 한국항해학회지
• /
• 제12권1호
• /
• pp.71-84
• /
• 1988

For traffic proceeding in random directions on a plane surface the frequency of collision, if no avoiding action in taken ,is approximately proportional to the square of the traffic density and directly proportional to the size and speed of the ship, Avoiding is normally taken and the rte of collisions is therefore also governed by additional factors such as the visibility, the effectiveness of the collisionavoidance rules, the competence of personnel or watchkeeping attitude, the maneuverability of the ship and the efficiency of radar and other equipments. From the viewpoint of watchkeeper who is responsible for maneuvering, watchkeeping attitude such as lookout and action to avoid collision is the most controllable factor among those mentioned above. In practice, according to the investigation of the institution of marine courts, about 50% co collisions occurred is caused by disorbedience to steering and sailing rules of international regulations for preventing collision at sea including lookout. So we classify the process of collisions with first sight of another ship , assessment of risk of collisions and action to avoid collisions and make a factural survey about lookout and action to avoid collisions from the point on "time" and " distance", namely relationship among ship's size, speed, first sight time of another ship, action to avoid collisions ,and distance from sight of another ship to collision occurred. According to the results of the actual survey , we come to conclude that most of collisions occurred are due to improper lookout and ineffective action to avoid collision which means time lag from first sight of another ship to time of action taken to avoid collision is relatively long. is relatively long.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.173-182
• /
• 2021

The maneuvering performance of a ship on the actual sea is very different from that in calm water due to wave-induced motion. Enhancement of a ship's maneuverability in waves at the design stage is an important way to ensure that the ship navigates safely. This paper focuses on the maneuvering prediction of a Russian trawler in wind and irregular waves. First, a unified seakeeping and maneuvering analysis of a Russian trawler is proposed. The hydrodynamic forces acting on the hull in calm water were estimated using empirical formulas based on a database containing information on several fishing vessels. A simulation of the standard maneuvering of the Russian trawler was conducted in calm water, which was checked using the International Maritime Organization (IMO) standards for ship maneuvering. Second, a unified model of seakeeping and maneuvering that considers the effect of wind and waves is proposed. The wave forces were estimated by a three-dimensional (3D) panel program (ANSYS-AQWA) and used as a database when simulating the ship maneuvering in wind and irregular waves. The wind forces and moments acting on the Russian trawler are estimated using empirical formulas based on a database of wind-tunnel test results. Third, standard maneuvering of a Russian trawler was conducted in various directions under wind and irregular wave conditions. Finally, the influence of wind and wave directions on the drifting distance and drifting angle of the ship as it turns in a circle was found. North wind has a dominant influence on the turning trajectory of the trawler.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.157-165
• /
• 2006

In February,2004, at International Maritime Organization (IMO), LONDON, a new international convention 'International Convention fur the Control and Management of Ship's Ballast Water and Sediment 2004' was adopted. It is called 'Ballast Water Management Convention (BWM)'. Ballast water means charged seawater or fresh water in ship's special tanks (ballast tank) to keep safety navigation and ship's maneuverability. However, from 1980, it was point out the serious problem for marine ecosystem and human life that ballast water includes harmful marine species (and small organisms) and these species are also discharged along with ballast water. These species were released with discharged ballast water in water areas, where species are different from discharged ballast water. The problem is that released species increase when released species are more powerful than native species and consequently, marine ecological system is destroyed in released water area. Authors have inspected the validity of the ballast water exchange using pumping-through method that is one of the methods of ballast water management. In this paper, the numerical simulation of the motion and density of the fluid at the time of exchange of the fluid in a 2-dimensional tank using the pumping-through method was carried out by using two different type numerical methods. One method is MPS method that is one of the particle methods. Other one is Finite Different Method (FDM). Authors were compared with result of two numerical method calculations and experiment result and reported some knowledge from these results.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.440-449
• /
• 2008

This paper deals with a method calculating various hull form parameters which are required in numerical analysis for ship performance such as motion, maneuverability, resistance and propulsion, etc. After the hull form is designed, before the model tests the ship's performances are evaluated by various analysis tools in which the hull form parameters are used with many kinds of forms aside from offset data. Here, The hull form parameters characterize the properties of hull form and contain positional, differential and integral information implicitly. Generally, the commercial CAD-system has not functions enough for supporting these form parameters and therefore each shipyard uses its own in-house analysis program as well as commercial analysis software. To overcome these limitations, modules for supporting these analysis programs have developed. The modules contain cubic composite spline cure using local curve fairing, intersect algorithm, Gaussian integral, and other geometric techniques needed in calculating hull form parameters. Using our analysis-supporting modules, a complex hull form can be remodeled exactly to the hull form designed by CAD-system and any hull form parameter required in various performance analyses can be calculated.

• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.652-660
• /
• 2017

최근 총톤수 16만 톤급 이상의 대형 크루즈선이 국내 항에 정기입항하고 있다. 크루즈를 이용한 국내 관광객이 증가함에 따라 정부에서는 크루즈산업 활성화를 위해 항만기반시설 확충에 많은 노력을 하고 있다. 현재 국내 주요 항구에서 크루즈전용부두 공사가 진행되고 있다. 그러나 국내 항만 및 어항설계기준에는 크루즈선 및 접안시설에 대한 표준제원이 제시되어있지 않다. 대상선박의 표준제원이 제시되어있지 않아 전용시설물 설계 및 인허가에 많은 어려움이 예상된다. 그래서 본 연구에서는 크루즈선에 대한 표준제원을 제시하기 위하여 현재 운항중인 크루즈선의 톤수별 대표선형의 제원을 분석하고 PIANC 사례 및 국내 항설기준을 비교분석 하였다. 분석결과 크루즈선은 연안여객선과 선박제원 및 선박조종성능에 차이가 있음을 알 수 있었다. 따라서 크루즈 전용시설물 설계를 위해서는 반드시 대상선박의 제원이 국내항설기준에 반드시 포함되어야 한다. 그리고 선박의 범위를 산정하기 위하여 크루즈선 평균제원 값에 커버율(75%)을 적용하여 크루즈선 표준제원과 수역시설물에 대한 기준을 제시하였다.