• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.4
• /
• pp.363-367
• /
• 2009

The ship maneuverability is changed by the effects of the bank cushion and the squat in the restricted water area. It is difficult to test the ship maneuverability by the real ship in the restricted water area because of ship's safety. In this study, a numerical model ship was used to simulate the ship's motion and to get information about the bank cushion and the squat in the restricted water area. The less apart from the quay the ship ran, the more ship's heading changed. The greatest change of ship's heading was $22.37^{\circ}$ when a ratio of the length between ship and quay to ship's breadh(=D/B) was 0.2. The squat of the ship was greater in shallower water and at faster speed. The greatest squat was 0.29m when a ratio of water depth to ship's draft(H/d) was 1.25 and ship's speed was 8 knots, the reduced speed was found to be the most important factor in the shallow water area for safety of the ship.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1865-1871
• /
• 2015

Ship's trim is the one of the most important factor for safety at the sea. Turning circle test and Z-test were carried out to find the effect of ship's trim and draft changes. The results are as follows. 1. If the ship's draft and trim became large, turning circle would be wide. 2. If the ship's draft and trim became large, ship's drift angle would be small. Small drift angle made wide turning circle. 3. Trim by the head made slow ship's final speed when turning circle test. 4. By Z-test, the deeper draft and trim by the stern made small OSA. Small OSA means strong ship's stability. 5. Totally 2nd OSA is smaller than 1st OSA on Z-test. 6. There were small differences of 2nd OSA in trim by the stern, but there were large OSA in trim by the head. 7. The larger trim by the stern, the smaller OSW. The small OSW means better ship's stability and maneuverability.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.4
• /
• pp.374-383
• /
• 2020

At ship design stage, the maneuverability is generally estimated based on the empirical formula or the computational fluid dynamic (CFD), which is one of the numerical simulation methods. Using the hydrodynamic derivatives derived through these methods can quantitatively estimate the maneuverability of target vessels and evaluate indirect maneuverability. Nevertheless, research on estimating maneuverability is insufficient for ships not subject to IMO maneuverability standard, especially fishing vessels, and even at the design stage, the empirical formula developed for merchant ships is applied without modification. An estimation error may occur due to the empirical formula derived from the regression analysis results of a model test if the empirical formula developed for merchant ships with different hull shapes is applied to fishing vessels without any modification. In this study, the modified empirical formula that can more accurately estimate the fishing vessel's maneuverability was derived by including the hull shape parameter of target fishing trawlers in the regression analysis process that derives Kijima et al. (1990) formula. As a result, the modified empirical formula showed an average estimation error of 6%, and the result improved the average error of 49% of Kijima et al. (1990) formula developed for merchant ships.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.164-170
• /
• 2006

To improve ship's maneuverability and carry out special goal POD propulsion system was equipped as propulsion and maneuvering system. To predict the maneuverability of a ship with POD propulsion system HPMM tests and POD open water test are carried out. In this paper modular model with 4 degree of freedom of a ship with twin POD propulsion system is presented. To use modular model the forces of POD propulsion system are measured separately from the hull forces. The measured forces and moments are analyzed by using modular model and whole ship model The simulation results of modular model are compared with those of whole ship model. From the present study it is Possible to analyze HPMM tests of a ship with twin POD propulsion system by modular model.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.98-109
• /
• 2020

In recent years, there have been concerted efforts toward predicting ship maneuvering in shallow water since the majority of ship's accidents near harbors commonly occur in shallow and restricted waters. Enhancement of ship maneuverability at the design stage is crucial in ensuring that a ship navigates safely. However, though challenging, establishing the mathematical model of ship maneuvering motion is recognized as crucial toward accurately predicting the assessment of maneuverability. This paper focused on a study on sensitivity analysis of the hydrodynamic coefficients on the maneuverability prediction of KVLCC2 in shallow waters. Hydrodynamic coefficients at different water depths were estimated from the experimental results conducted in the square tank at Changwon National University (CWNU). The simulation of standard maneuvering of KVLLC2 in shallow waters was compared with the results of the Free Running Model Test (FRMT) in shallow waters from other institutes. Additionally the sensitivity analysis of all hydrodynamic coefficients was conducted by deviating each hydrodynamic derivative from the experimental results. The standard maneuvering parameters including turning tests and zig-zag maneuvers were conducted at different water depths and their effects on the standard maneuvering parameters were assessed to understand the importance of different derivatives in ship maneuvering in shallow waters.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.171-176
• /
• 2006

To improve ship's maneuverability high lift rudders like as Schilling rudder, flap rudder etc. were used. To predict the maneuverability of a ship with flap rudder HPMM tests are carried out. To analyze the test results modular model is used. To use modular model the forces of flap rudder must be measured separately from the hull forces. The flap rudder is made as independent system from the hull. To investigate the simulation results of modular model the tests results are analyzed by whole ship model, and simulated. The compared results of simulation show a good agreement except turning test. The reason is the different analysis result of flap rudder drag forces. From the present study it is possible to analyze HPMM tests of a ship with flap rudder by modular model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.800-808
• /
• 2022

The International Maritime Organization adopted the interim standards for ship maneuverability in November 1993 for preventing collision of ships at sea and for protecting the marine environment, and based on the accumulated data, in December 2002, the established standards for ship maneuverability were adopted. However, the standards adopted are those at full load, even keel, and at least 90 % of the ship speed at 85 % of the ship's maximum power. Moreover, these standards have limitations in providing information on maneuverability under actual navigational conditions. Therefore, in this study, frequency analysis AHP analysis techniques were studied by consulting navigational officers, captains, and experts, who have significant knowledge on ship maneuverability, utilization of the current standards, and the information necessary for the operation of the actual ship. The results of this study confirmed that the necessary information on maneuverability for the navigational officer operating the vessel is information about the turning circle at a small angle of 5°-10° and z-test information at maneuvering speed, not sea speed. Additionally, in relation to speed control, additional information on deceleration inertia and acceleration inertia is needed than the information on the stopping ability at sea speed and full loaded condition. The derived results are considered to be useful as basic data for preparing guidelines for ship maneuverability necessary for navigational of icers who operate ships.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.2
• /
• pp.11-17
• /
• 1997

In this paper, we studied to improve Inoue's[1] and Kijima's[2] model used to predict ship's manoeuvrability in initial design stage. To perform this work, we had PMM(Planar Motion Mechanism) test and rudder open water test for 12 Models of low-speed blunt-ship which have horn type rudder and bulb in afterbody. Using MMG(Mathematical Modelling Group) model, we analyzed hydrodynamic and MMG experimetnal coefficidnts used to search sensitivities and to estimate ship's manoeuvrability, adn the results are performed by the regression analysis of principle parameters. We varified them to analyze ship's manoeubbrability , had simulate manoeubrability to check revised MMG model and compared them wiht Inoue's method. the result of PMM test and sea trial. Then it is found that the revised method can predict the maneuverability more accurately even for an unstable ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.37-39
• /
• 2015

The ships transiting the Northern Sea Route (NSR) have been gradually increased so that the number of ship-ice collision accidents would be increased. The collision between ship and ice floe can lead to serious damage of hulls and decline of ship's maneuverability. In this study, collision tests that a model ship is forced to collide with disk-shaped synthetic ice floes are conducted in a towing tank. The synthetic ice floes made of polypropylene which has similar density with real ice are used. The ice load is measured by a load cell installed on the carriage rod. The ice floe's motion is measured by a motion sensor installed on the synthetic ice floe. The influences of contact conditions such as hull form and ship speed on the ship-ice collision response are investigated and discussed by measured peak force and ice floe's motion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.393-399
• /
• 2010

Recently, a vessel's maneuvering performance is considered to be an important subject as marine pollution from the ships that stranded on a rock becomes more severe. So, IMO(International maritime organization) has adopted Resolution MSC.l37 to enhance international standards of ship's maneuverability. There's more than one way to improve ship's maneuverability. This research focused on improving ship's maneuverability by high-lift rudder. To predict the maneuverability, the numerical simulation model was used. The evaluation of maneuverability was carried out by turning test and zig-zag test. The results obtained with these simulation showed that the high-lift rudder would be effective in improving the turning ability of the ship. But it was clarified that there Has a possibility that course changing ability night become bad through an increase of rudder lift.