• 수산해양교육연구
• /
• 제12권2호
• /
• pp.199-212
• /
• 2000

It is very important to investigate the hull response of a fishing vessel in the sea to ensure the safe navigation and fishing operation in rough sea by preserving excellent sea keeping qualities. For this purpose, the author measured various responses of three stem trawlers in waves using real sea experimental measuring system. The author analyzed the experimental data using the statistical and spectral analyzing method to get the characteristics of the motion responses of the vessels according to the wave height and the ship's speed. The results obtained can be summarized as follows ; (1) Rather higher response of the pitch motion due to the wave height appeared in the head sea and the bow sea than any other wave direction without relevance to ship's size. In case of the roll motion, the beam sea and the quartering sea have a high response value. The period of peak of the pitch motion and the roll motion according to the wave height in each vessel has almost same value respectively. (2) The change of response of the pitch motions deeply depend on the ship's speed in the head sea and the bow sea, but not in the other wave direction. (3) The change of response of the roll motions in the beam sea, the quartering sea and the following sea are affected by the influence of the ship's speed in 5k't to 8k't, but not related to the ship's speed in out of that range.

• Journal of Ship and Ocean Technology
• /
• 제5권4호
• /
• pp.44-50
• /
• 2001

Large container carriers are suffering from lack of knowledge on reliable correlation allowances between model tests and full-scale trials, especially at fully loaded condition, Careful full-scale sea trial with a full loading of containers both in holds and on decks was carried out to clarify it. Model test results were analyzed by different methods but with the same measuring data to figure out appropriated correlations factors for each analysis methods, Even if it is no doubt that model test technique is one of the most reliable tool to predict full scale powering performance, its assumptions and simplifications which have been applied on the course of data manipulation and analysis need a feedback from sea trial data for a fine tuning, so called correlation factor. It can be stated that the best correlation allowances at fully loaded condition for both 2-dimensional and 3-dimensional analysis methods are fecund through the careful sea trial results and relevant study on the large size container carriers.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.709-716
• /
• 2018

2017년 승선실습 중이던 위탁실습생이 사망하는 사고가 있었다. 이 실습생은 1일 12시간씩 작업을 했다고 한다. 실습생에 대한 업무시간과 휴식시간을 규정하는 법령은 아직까지 없다. 이 연구는 상선에서 승선실습을 하는 위탁실습생의 업무실태 파악과 위탁실습생의 처우 개선을 위해 설문조사와 통계분석을 수행했다. 설문은 상선에서 위탁실습을 다녀온 학생을 대상으로 진행했다. 설문결과는 다음과 같다. 첫째, 선종에 관계없이 1일 평균 10시간씩 업무했다는 의견이 43.0 %를 차지했고, 휴식시간은 평균 8시간이었다는 의견이 35.2 %를 차지했다. 응답자의 15.6 %가 12시간 이상 업무한 경험이 있다고 했다. 라면 끓이기, 휴식 중에 작업, 사적인 심부름 등 부당한 지시 사례가 있었다. 둘째, 선종별 교육만족도에 대해 LNG운반선에서 실습한 학생들의 만족도가 높았던 반면, 산적화물선과 컨테이너운반선의 교육만족도는 낮았다. 선박의 크기와 선령, 업무시간, 휴식시간, 실습지원비가 교육만족도에 미치는 영향은 미약함을 확인했다. 끝으로, 위탁실습생의 근로자성 판단에 대해 56.8 %가 '근로에 해당된다'고 응답했다. 설문결과를 통해 위탁실습의 열악성과 위탁실습생이 근로와 휴식에 대한 법령의 사각지대에 있음을 확인했다. 이를 위해 업무시간과 휴식시간의 법령 마련, 폭력 및 성희롱에 피해방지시스템 구축 등을 개선방안으로 제시했다. 이 연구는 위탁실습생의 업무와 휴식에 논문의 초점을 맞춰 선박의 종류와 크기, 선령별로 실습만족도를 분석했다는 것에 의의가 있다.

• 대한인간공학회지
• /
• 제30권1호
• /
• pp.251-257
• /
• 2011

When designing a ship, ergonomic considerations are crucial when minimizing a navigator's fatigue due to the burden of work, and to appropriately operate the navigational equipment for each given situation by helping the operator to understand the surroundings as well as the physical functions of the ship. However, insufficient consideration of ergonomic elements in the actual design of ship Bridges is lowering the performance of safe navigation and allows for the possibility of operation or readout errors. Consequently, these errors lead to an increase in maritime accidents. Therefore, this study conducted a usability evaluation on the importance of and the usage frequency of navigational equipment, their influence on actual navigation, and the possibility of error upon operation or readout between training ship officers, to derive an optimized layout that includes the consideration of ergonomic factors for on-Bridge navigational equipment, which are currently arranged differently according to their type or size. The optimized layout of on-Bridge navigational equipment was carried out based on the evaluation results, using the Lingo program. Through the process of optimization, revised layouts of on-Bridge navigational equipments(control and display device) were suggested, considering emergency situations(ship collision, stranding, fire and explosion, sinking, etc.) during navigation.

• 한국항해항만학회지
• /
• 제33권8호
• /
• pp.505-511
• /
• 2009

선박의 대형화에 따른 풍압면적의 증가 및 갑작스런 돌풍 등 자연환경의 급격한 변화 등으로 묘박 중인 선박이 주묘 되는 현상이 자주 발생되고 있다. 특히, 선박운항자의 관점에서는 풍속 및 파랑 등의 외력 변화에 따른 주묘 발생 시점 및 주묘 형태, 주묘시의 속력과 주변 선박 또는 장애물과의 충돌 가능성 등을 고려한 적절한 대응 방안이 모색되어야 한다. 본 논문은 실습선 한바다호가 단묘박으로 묘박 중 기상이 점점 악화되면서 실제로 주묘가 발생한 현상을 검토한 것으로, 묘박 당시의 풍압력, 유압력, 표류력, 선체운동 그리고 파주력 등을 분석하여 주묘의 발생 가능성 및 한계 외력을 고찰하였다. 또한, 당시의 외력 조건하에서 발생한 주묘패턴을 분석하여 선수방위 변화량, 스윙폭, 주묘 속도 등을 확인하였다.

• 한국항해학회지
• /
• 제8권1호
• /
• pp.17-48
• /
• 1984

The economy of ship's size and speed is affected by the freight rates, sailing distances, cargo handling rates, fuel oil prices and even interest rates of the borrowed funds. It can be a step more powerful measures if the economic evaluation model takes in a cargo lot size which prevails in the shipping markets. This paper has dealt with hypothetical cargo lots which happen to the market with uniform distribution in probability. The evaluation models are either profit maximization method or cost minimization method. The former compares among different voyages in profitability to the invested funds, the later defines the transportation efficiency in ton-mile unit and be used in comparing two or more transportation means. This paper adopted both of above methods to derive out ships economical evaluation contours for the various ship's speed and deadweight for certain cargo lot sizes, which can be used as important managerial decision data in purchasing ships or selecting a most profitable one among the proposed voyages. This evaluation contours will also be efficiently used in appraising so called "handy size ships" in connection with port water depth and conditions of voyage tracks.ge tracks.

• 해양환경안전학회지
• /
• 제9권1호
• /
• pp.41-50
• /
• 2003

한국 연안의 각 항로에 취항하고 있는 대표적인 선형의 여객선들을 대상으로, 각 선형별로 선체운동 계산, 내항성능을 분석하여 선박의 안전성을 평가하였다. 이를 위하여 선박의 안전운항과 가장 밀접한 관련을 갖는 바람과 파랑을 주요 해역별로 비교 분석하였다. 이러한 기강정보를 입력요소로 하여 주요해역을 항행하는 대표적인 선형의 여객선들에 대하여 수치 시뮬레이션을 실시하여 여객선의 항해안정성을 평가하였다.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.151-158
• /
• 2005

The concept of recent cruise ship design is changing rapidly according to the expansion of cruise fleet sizes, emphasis on passenger safety and tightened requirements for ecotourism. In this view point, this study focuses on investigative analysis for the recent trends in cruise ship design and construction. Based on the shipyard production logs and the cruise industry's annual news, the data for principal dimensions of newly built cruise ships, their hull forms and propulsion devices and the characteristics of cabin and public spaces are collected and analysed. As expected, it is found that the size of cruise ships is growing and the design concept is becoming more leisure-oriented for all ages rather than lust sightseeing. For producing a greater ton/pax ratio, the adoption of podded electric propulsion system, outside cabins and balcony spaces is a common trend in recent cruise ship design.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.352-366
• /
• 2021

To decrease Europe's harmful emissions, the European Union aims to substantially increase its offshore wind energy capacity. To further develop offshore wind energy, investment in ever-larger construction vessels is necessary. However, this market is characterised by seemingly unpredictable growth of market demand, turbine capacity and distance from shore. Currently it is difficult to deal with such market uncertainty within the ship design process. This research aims to develop a method that is able to deal with market uncertainty in early ship design by increasing knowledge when design freedom is still high. The method uses uncertainty modelling prior to the requirement definition stage by performing global research into the market, and during the concept design stage by iteratively co-evolving the vessel design and business case in parallel. The method consists of three parts; simulating an expected market from data, modelling multiple vessel designs, and an uncertainty model that evaluates the performance of the vessels in the market. The case study into offshore wind foundation installation vessels showed that the method can provide valuable insight into the effect of ship parameters like main dimensions, crane size and ship speed on the performance in an uncertain market. These results were used to create a value robust design, which is capable of handling uncertainty without changes to the vessel. The developed method thus provides a way to deal with market uncertainty in the early ship design process.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.43-47
• /
• 2004

두 개의 다른 위성 센서 (RADARSATSAR와 KOMPSAT EOC)를 사용하여 선박탐지 실험을 실시하였으며, 탐지성능을 검토하였다. 목포항과 울산항을 대상으로 실시하였으며 필요에 따라 현장 검증 데이터를 얻기 위하여 위성 통과 시에 선박에 승선하여 선박정보를 포함하는 Sea Truth를 취득하였다. 또한 VTS레이더 정보를 위성데이터와 비교를 통하여 위치정보의 검증을 수행하였다. 광학과 마이크로파 원격탐사에 있어 그 특성의 차이는 뚜렷하였으나, 광학의 경우 선속 3.1kts 이상인 선박의 후류가 탐지되었으며, 마이크로파의 경우, 최대 6-7kts의 선박에 대해서도 후류의 탐지는 어려웠다. 그러나, 마이크로파는 다양한 선형을 반영한 신호가 sigma nought로 표현되므로 향후 선형 정보뿐만 아니라, 침로의 추출이 가능하다는 결론을 얻었다. 또한, 동일 선박이라 할지라도 신호강도의 차이에 의해 선박이 2개 이상으로 나타나는 현상도 파악되었다. 앞으로 다양한 해상환경 및 위성 관측 모드에 따른 추가 실험을 실시하여 자동 선박추출이 가능할 것으로 판단된다.