• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.107-117
• /
• 1996

The shift feeling, a driver experiences during gear shifting, is a major factor in manual transmission quality. Recently, the shift feeling has becoming more severe every year in proportion to the higher torque and revolution speed of today's automotive engine. In this paper, first, the diagram of a relation between cone angle, sleeve chamfer angle, and friction coefficient of ring is investigated for easy design of Synchromesh system. And then, methodology to solve the shift problems such as clashing noise and rough shift, ect. by analyzing the synchronization procedure in sequence and by investigating the shift waveform if presented.

• Korean Journal of Adult Nursing
• /
• v.20 no.6
• /
• pp.941-949
• /
• 2008

Purpose: This study was conducted to describe the effects of aroma inhalation on sleep and fatigue in night shift nurses. Methods: The research design was one group pre-posttest design. The subjects were 17 night shift nurses who work at neurosurgery intensive care unit of K hospital of C university in Seoul. During three consequent night shifts, the participants were worn the Actigraph to measure the sleep pattern on their wrist since their first night shift work. The quality of sleep and fatigue was measured by survey when they awoke at 6 pm after second night shift work. And these measures were repeated during the night shifts in second and third week. Aroma inhalation was applied before going to bed after finishing each night shift work during second and third week. SPSS 12.0 program was used for data analysis. Results: There were no statistically significant differences in sleep latency and total sleeping time. However, significant differences were found in the sleep efficiency, awakening number, sleep quality, subjective symptom and intensity of fatigue. Conclusion: These results showed that aroma inhalation had positive effects on the pattern and quality of sleep and reducing fatigue in night shift nurses.

• Journal of Drive and Control
• /
• v.17 no.3
• /
• pp.47-56
• /
• 2020

As a shift control of automatic transmission was managed with the electronic control unit (ECU), shift quality which is a measure of shift shock during gear change has markedly improved. However, the initial clutch pressure control of the clutch filling phase should continue to rely on the predetermined control input since the input and output speeds are unchanged until the shifting process attains the inertia phase. It is critical to minimize the clutch response time and control the clutch pressure accurately at the end of clutch fill to achieve quick shift response and smoothness. Advanced transmission companies have adopted an auto calibration method which establishes the databases for the clutch piston fill-up attributes and the frictional characteristics of the disks. In this study, a distinctive auto calibration algorithm for forklift transmission under development is proposed and verified with the real-vehicle test. The experimental calibration results showed consistent turbine dynamics at the initial stage of shifts with the properly calibrated clutch-fill control parameters. By using this technique, it is necessary to finalize the shift control for the various operation conditions.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.62-73
• /
• 2022

This study investigates the working conditions of shift workers according to age group by analyzing the sixth Korean Working Conditions Survey's data. A total of 1,323 shift workers were extracted from the dataset. Three age groups (A: 20s-30s, B: 40s-50s, C: 60s and above) were statistically compared in terms of health problems, emotional hazard exposure, work-life imbalance, and satisfaction with working conditions. Elderly shift workers (those in their 60s and above) had significantly more severe health problems and work-life imbalance, greater exposure to emotional hazards, and lower satisfaction with working conditions than young shift workers (those in their 20s-50s). The study's findings reveal the characteristics of working conditions for elderly shift workers and would be useful for improving shift workers' quality of life, as well as safety and productivity in the workplace.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.337-338
• /
• 2007

The present paper proposes the method which improves a record and remaking efficiency of the optical pickup as applying the mirror where Phase Shift(PS) principle is applied to optical pickup. Plan to get a circularly polarized light quality above quality which is embodied through Existing Quater Wave Plate(QWP) and a function of total reflection mirror as applying PS mirror which integrates QWP with the function of the total reflection to optical pickup. In the present paper, embody circularly polarized light quality through applying PS mirror to optical pickup, and it through, plan to propose to come true the optimization of recording and remaking CD/DVD disc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.753-756
• /
• 2008

We analyzed the problem of the typical definition of the viewing angle, where the contrast ratio is higher than 1:10 and suggest the new definition of the viewing angle by considering the contrast ratio, color shift, luminance and gamma shift in the viewing direction all together.

• Journal of Ecology and Environment
• /
• v.45 no.3
• /
• pp.130-142
• /
• 2021

Background: Climate change is occurring rapidly around the world, and is predicted to have a large impact on biodiversity. Various studies have shown that climate change can alter the geographical distribution of wild bees. As climate change affects the species distribution and causes range shift, the degree of range shift and the quality of the habitats are becoming more important for securing the species diversity. In addition, those pollinator insects are contributing not only to shaping the natural ecosystem but also to increased crop production. The distributional and habitat quality changes of wild bees are of utmost importance in the climate change era. This study aims to investigate the impact of climate change on distributional and habitat quality changes of five wild bees in northwestern regions of Iran under two representative concentration pathway scenarios (RCP 4.5 and RCP 8.5). We used species distribution models to predict the potential range shift of these species in the year 2070. Result: The effects of climate change on different species are different, and the increase in temperature mainly expands the distribution ranges of wild bees, except for one species that is estimated to have a reduced potential range. Therefore, the increase in temperature would force wild bees to shift to higher latitudes. There was also significant uncertainty in the use of different models and the number of environmental layers employed in the modeling of habitat suitability. Conclusion: The increase in temperature caused the expansion of species distribution and wider areas would be available to the studied species in the future. However, not all of this possible range may include high-quality habitats, and wild bees may limit their niche to suitable habitats. On the other hand, the movement of species to higher latitudes will cause a mismatch between farms and suitable areas for wild bees, and as a result, farmers will face a shortage of pollination from wild bees. We suggest that farmers in these areas be aware of the effects of climate change on agricultural production and consider the use of managed bees in the future.

• Korean Journal of Occupational Health Nursing
• /
• v.16 no.1
• /
• pp.37-47
• /
• 2007

Purpose: To find out the relationship between the shift work, and disrupted sleep and consequent fatigue symptoms. Methods: The questionnaires were given to 345 nurses of 4 hospitals with over 400 beds in Daejeon. Results: The shift workers showed worse subjective quality of sleep than the daytime workers, and had significantly higher frequency of "cannot get to sleep within 30 minutes", "wake up in the middle of the night" and "wake up in the early morning". The shift workers had significantly higher scores of subjective symptoms of fatigue than the daytime workers, and the fatigue was found to be the mental type. The subjective symptoms of fatigue scores were significantly higher in the group who had "cannot get to sleep within 30 minutes", "wake up in the middle of the night" and "wake up in the early morning". Conclusion: The study results indicated that the shift workers had the higher level of subjective symptoms of physical fatigue as well as the worse quality of sleep than the daytime workers. It is speculated that the factors attributable to the poor quality of sleep or sleep induction disorders of nurses of hospitals could be due in major part to adaptational difficulties resulting from frequent night shifts.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.105-114
• /
• 2001

In this study, a shift control algorithm far improving the shift quality of a parallel hybrid drivetrain with an automated manual transmission (AM) is proposed. The general AMT requires the sophisticated control of clutch in the clutch engagement to improve its shift characteristics, and that is generally known to be difficult. But in this hybrid drivetrain, we can control the speeds of clutch plates by engine and motor control, and it provides the easier clutch control in shift process than general AMT. Additionally, it permits the much-reduced shift shock. The motor control during the shift period is also to achieve reduced velocity drop of the vehicle in comparison with that of a general AMT. Furthermore various dynamometer-based experiments are carried out to prove the validity of the proposed shift control algorithm.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.1-8
• /
• 2002

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and qualify control are very important to supply with a product uniformly and inexpensively In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.