• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.245-252
• /
• 1996

$\lambda$/4 phase-shifted DFB lasers with nonideal grating structure have been studied by using an effective-index transfer matrix method where material dispersion, vwaveguide dispersion and waveguide-structuredependent loss are taken into consideration. Nonideal grating structure in the center phase-shift region does not incur serous degradation of laser characteristics. Phase-shift error from the ideal shift of $\pi$ causes a decrease in the threshold gain difference and lasing wavelength shift and should be less than $\pi$/4 when residual facet reflectivity is 0.7%. also, positional error of the phase-shift should be less than 9% of the cavity length in order for the threshold gain difference to be decreased less than 10%.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.20-29
• /
• 2011

This paper presents an improved phase-shift pulse-width modulation (PWM) full-bridge converter using a blocking capacitor. As the proposed converter reduces the circulation energy by inserting only one series blocking capacitor at the primary side of the conventional phase-shift PWM full-bridge converter structure, it improves the operation characteristics of the conventional converter. In this paper, first, the operation of conventional phase-shift PWM full-bridge converter is roughly reviewed, and then the operational principle of the proposed converter is classified and explained by each mode. After that, a prototype design example based on the operational principle is shown. Then, the improved operation characteristics of the proposed converter are actually verified through the experimental results.

• 한국직업건강간호학회지
• /
• 제7권2호
• /
• pp.155-163
• /
• 1998

In order to investigate the effects of rotating shift work on the subjective characteristics of sleep and mental depression questionnaire survey was carried out on 405 shift workers and 153 nonshift workers who were nurses employed. in three university hospital. The questionnaire forms used in this study were the self rating depression scale(SDS) and circadian type questionnaire(CTQ) factor R(rigidity/flexbility of sleeping habit) and factor V(inability/ability to overcome drowsiness). The results were as follows ; 1. Mean score of CTQ R in shift workers was significantly lower than that in nonshift workers, however, no significant difference in CTQ V was observed between two groups. 2. Mean score of SDS was significantly higher in shift workers(44.1) than in nonshift workers(39.8). 3. Mean self rating depression scale scores of pervasive affect, physiologic equivalents and psychological equivalents were significantly higher in shift workers than in nonshift workers. 4. In shift worker, mean SDS score was the highest in confusion and followed by diurnal variation, retardation, and indeciveness in the descending order. In nonshift worker, that score was the highest in decreased libido and followed by confusion, and indeciveness in the descending order. 5. Circadian type questionnaire scores was significantly and negatively correlated with significantly and negatively correlating with Self-rating depression scale scores(r=-0.473).

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.225-232
• /
• 2007

This work intends to investigate the effects of shift characteristics on the propulsion performance of a manual wheelchair with an automatic transmission. A planetary gear train is employed to generate a two-stage shift automatically, based on the distance traveled from rest. Motion analysis has been performed for measuring kinematic properties of the arm and then the inverse dynamics has been applied for estimating joint forces/torques. Then, a parametric study has been performed to find a set of the shift ratios and the shift intervals for optimizing propulsion performance. Results show that the propulsion performance is closely related to the shift condition. It is found that a short shift interval is desirable for a short distance propulsion. However, an optimum shift interval for a long distance propulsion is inversely proportional to the shift ratio approximately. Consequently, the automatic transmission can greatly lower the joint loadings by the speed reduction, which eventually contribute to prevent joint injuries of wheelchair users.

• 임상간호연구
• /
• 제23권1호
• /
• pp.54-63
• /
• 2017

Purpose: The purpose of this study was to compare the working status and Standard Shiftwork Index (SSI) between night shift-fixed nurses and rotating shift nurses. Methods: Participants were 367 nurses working as registered nurses at 7 different medical institutions. The data were collected from August 8, 2016 to September 30, 2016. Results: Night shift fixed nurses were more satisfied with work schedule than rotating shift nurses. Rotating shift nurses reported higher SSI scores, such as chronic fatigue, musculoskeletal problems, than night shift fixed nurses. In SSI's sub-items, rotating shift nurses reported higher scores, such as the amount of sleep, feeling well after sleep, heartburn or stomach-ache and heartbeat irregularities, than night shift fixed nurses. Conclusion: The results indicated that night shift fixed system might be an effective method to improve nurses' work satisfaction. It is necessary to figure out any suitable night shift fixed system based on the characteristics of each nursing organization. The SSI might be an useful tool to measure the nurses' satisfaction in reference to their work shift.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.674-679
• /
• 2002

As the object of this study, a transmission system with the style of HST in combination with mechanical semi-automatic transmission for application in hydraulic wheel excavators was chosen. The dynamic characteristics of the object transmission was studied by numerical analysis of the mathematical model. The results of numerical analysis showed comparatively good agreements with experimental results, so the validity of the numerical analysis process was ascertained.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.118-126
• /
• 2010

The automated mechanical transmission(AMT) is composed of electronic control management(ECM) and automatic shift gear(ASG). The AMT has advantages which are high efficiency of manual transmissions(MT) and offer operation convenience similar to automatic transmissions(AT). However, it has defects that are the torque gap during gear shift transients and shift time is long. To reduce such defects, it is necessary practically to evaluate error and characteristics as developing simulation model before the control algorithm is applied. In this paper, models are composed of vehicle model and AMT shift control model. Particularly AMT shift control model consists of main clutch management model (MCM) and shift control management model(SCM). The developed models were verified by comparing the simulated and experimental results under the same operational conditions. It can also be used to evaluate shift algorithm.

• 한국안전학회지
• /
• 제37권5호
• /
• pp.62-73
• /
• 2022

This study investigates the working conditions of shift workers according to age group by analyzing the sixth Korean Working Conditions Survey's data. A total of 1,323 shift workers were extracted from the dataset. Three age groups (A: 20s-30s, B: 40s-50s, C: 60s and above) were statistically compared in terms of health problems, emotional hazard exposure, work-life imbalance, and satisfaction with working conditions. Elderly shift workers (those in their 60s and above) had significantly more severe health problems and work-life imbalance, greater exposure to emotional hazards, and lower satisfaction with working conditions than young shift workers (those in their 20s-50s). The study's findings reveal the characteristics of working conditions for elderly shift workers and would be useful for improving shift workers' quality of life, as well as safety and productivity in the workplace.

• 지구물리와물리탐사
• /
• 제6권4호
• /
• pp.199-206
• /
• 2003

MT 탐사자료의 역산에 있어서 지하의 전기비저항과 함께 정적효과를 파라미터로 설정하여 동시 역산을 수행하는 알고리듬을 하나의 지하구조 모델에 각기 다른 양의 정적효과를 포함시킨 4개의 자료에 대하여 적용시키고 이를 정적효과가 전혀 고려되지 않은 경우와 비교하여, 3차원 역산에서 정적효과가 미치는 영향 및 그 특성에 대하여 분석하였다. 일반적으로 현장자료에 정적효과가 어느 정도 포함되어 있는지에 대한 사전 정보가 전혀 없으므로 역산과정에서 이를 조절하는 trade-off 파라미터의 적절한 선택이 매우 중요하며, 본 연구에서는 모델의 smoothness와 static shift의 양을 조절하는 각각의 파라미터의 크기를 매 반복마다 구하는 알고리듬을 동시역산에 적용하였으며 4개의 이론자료에 적용한 결과 만족할 만한 결과를 얻었다. 정적효과가 포함된 자료에 대하여 정적효과를 고려하지 않은 역산(기존의 MT 역산)에서는 지표 block의 전기비저항을 바꿔 역산 스스로가 정적효과를 유발하려는 경향을 보였으며 이의 결과로 저주파수에서는 상당한 정적효과를 발생시켜 정적효과가 그리 크지 않은 경우 심부구조를 어느 정도 규명해 내는 것으로 나타났다. 그러나 고주파수에서는 이들 지표 block의 영향이 주파수에 무관하지 않게 되어 정적효과를 포함하는 자료의 겉보기 전기비저항과 위상을 동시에 만족시키지 못하게 된다. 그러나 정적효과를 파라미터로 하는 동시역산의 경우, 매우 심한 정적효과를 포함하는 자료에 대해서도 지하구조를 매우 정확히 영상화 하는 것이 가능하였다.

• 대한인간공학회지
• /
• 제22권3호
• /
• pp.13-26
• /
• 2003

The purpose of this study is to investigate the present conditions of the night work and shift work systems in the heavy chemical industrial complexes found in Changwon, Masan, and Chinhae. Korea. We will attempt to define and classify their problems; and to discover further ways to improve their systems. Fifty production factories were carefully selected as the subjects for this study. The shift systems were classified into five categories. The consecutive night shifts were long in almost all cases with 6 days (36 factories) and 7 days (13 factories). It was found that the night work of about] 2 hours continues for a long period in the weekly rotation full-day shift systems and the night-including non-full-day shift systems, and there was no holiday during a shift cycle in the continuous full-day shift systems. The work time in most shift systems was longer than the 44-hours/week permitted by Korean law. Considering the characteristics of these various types of shift systems, the most essential thing to reduce the shift workers' work load may be to shorten their working hours and improve the schedule of shift systems. It is highly recommended as a fundamental solution. to reduce the portal-to-portal hours from 12 to 8 in the night-including non-full-day shift systems and the weekly rotation full-day shift systems, and at least to employ a 4-team 3-shift system in the continuous full-day shift systems. In addition to this, it should from now on be taken as a goal to restructure the types of shift systems by taking such measures as avoiding continuous night work if possible, providing sufficient off-duty intervals both before and after night shift, providing increased opportunities for workers to nap during night work. and increasing the number of holidays.