• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.139-151
• /
• 2000

Developing a new commercial product, it is need to connect the end users demand of quality to the industrial technology of company. For this reason, this study is to build up the users demand for the imminent marketing product of a certain company by Analytic Hierarchy Process, analyze quantitatively users subjective thoughts collected by Group Consensus, calculate the added-value of users demands and verify the consistency of users opinions by consistency-exponential-calculation. The added value obtained by this method is substituted into a user-demand item of Quality Function Deployment. And, the technical characteristic data transferred from the extracted essential factor for developing and manufacturing a new product is substituted into a technical characteristic item of QFD. The faculty of quality is firstly finished by this procedure. But, because the relation a technical characterization with users demand do not be known in new product, Wassermans method was introduced for the correlation users demand with technology and for the processing and marketing of a new product. The all assumption on this thesis was based on the reliable real data of a certain company.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.727-738
• /
• 1996

An one dimensional atmosphere-canopy-soil interaction model is developed to estimate of the heat budget parameter in the atmospheric boundary layer. The canopy model is composed of the three balance equations of energy, temperature, moisture at ground surface and canopy layer with three independent variables of Tf(foliage temperature), Tg(ground temperature), and qg(ground specific humidity). The model was verilied by comparative study with OSUID(Oregon State University One Dimensional Model) proved in HAPEX-MOBILHY experiment. Also we applied this model in two dimensional land-sea breeze circulation. According to the results of this study, surface characteristics considering canopy acted importantly upon the simulation of meso-scale circulation. The factors which used in the numerical experiment are as follows ; the change for a sort of soil(sand and peat), the change for shielding factor, and the change for a kind of vegetation.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.203-213
• /
• 1996

In this study the subcritical crack growth behavior in an Al2O3-SiCw composite has been investigated using in situ fracture technique of applied moment double cantilever beam (AMDCB) specimens indside an SEM. This technique allows the detailed observation of whisker and grain bridging in the crack wake region. The experimental results indicated that the KI-a curve was deviated from the conventional powder law form and that the existed a region where the rate of microcrack growth was decreased with increasing the externally applied stress intensity factor. This behavior could be explained by arising crack growth resistance i.e. R-curve behavior which was associated with crack shielding due to whisker and grain bridging. The R-curve was also analyzed from the KI-a curve data in order to quantify the bridging effect in the Al2O3-SiCw composite.

• 연구논문집
• /
• 통권33호
• /
• pp.157-165
• /
• 2003

New titanium alloys with a low elastic modulus have been developed for biomedical applications to avoid the stress shielding effect of the artificial prosthesis. The newly developed alloys contained the transition elements like Zr, Hf, Nb, Ta which were non-cytotoxicity elements and $\beta$ stabilizers. In the present paper the elastic moduli of Ti-xM containing Zr, Hf, Nb, Ta were evaluated by measuring the acoustic velocity (PEG). The effectiveness of the alloying elements for lowering the elastic modulus was investigated. In addition, the dominant factors for the low modulus were discussed. Ta was the most effective in lowering the elastic modulus of the alloys. The effectiveness of Hf was not acceptable for decreasing the elastic modulus. The dominant factor was the lattice parameter for Zr, and the poisson's ratio for Nb, Ta, respectively.

• 전기의세계
• /
• 제14권1호
• /
• pp.5-12
• /
• 1965

In the designs of the sensitive electronic devices such as phase sensitive detector, X-ray diffractometer, and neutron diffractometers, we must take into account the geometrical factors in a coil systems and extraneous stray fields. Input wave forms in such a sensitive electronic devices are often altered by the influence of these factors. Since the magnitude of the stray fields is generally very small, this affection may be removed by applying a good shielding but it is not ease to remove the affection from a geometrical factor. This affection must be however calculated by the theoretical methods and analytical solution in the equation of these factors. The fundamental purpose of this paper lie in the theoretical calculations and practical measurements of the geometrical factor in the coil systems, finite solenoid, and four point prove. In the heoretical calculations, the geometrical factors in the coil systems were calculated by applying the elliptic functions and in the contact points were calculated by applying the elliptic functions and in the contact points were calculated by applying the eigen functions and the infinite series. The measurements were carried out by using the sensitive electronic device made from author's design, as shown in the Fig. 9. The result of this work has verified the essential correctness of theoretical investigations and measuring techniques of geometrical factors on the design of sensitive electronic devices. It also has several advantages such that: (1) all the data obtained may give effective data to designer to work on the field of sensitive electronic devices or microelectronic devices, (2) it has evidently explained the characteristics of electrical investigations and physical definition, and has removed the conventional error of geometrical factors in the coil systems and contact points.

• 전자공학회논문지C
• /
• 제35C권4호
• /
• pp.21-29
• /
• 1998

As silicon geometry shrinks into deep submicron and the operating speed icreases, higher accuracy is required in the analysis of the propagation delays of the gates and interconnects in an ASIC. In this paper, the driving characteristics of a CMOS gate is represented by a gatedriver model, consisting of a linear resistor $R_{dr}$ and an independent ramp voltage source $V_{dr}$ . We drivered $R_{dr}$ and $V_{dr}$ as the functions of the timing data representing gate driving capability and an effective capacitance $C_{eff}$ reflecting resistance shielding effect by interconnet circuits. Through iterative applications of these equations and AWE algorithm, $R_{dr}$ , $V_{dr}$ and $C_{eff}$ are comuted simulataneously. then, the gate delay is decided by $C_{eff}$ and the interconnect circuit delay is determined by $R_{dr}$ and $V_{dr}$ . this process has been implemented as an ASIC timing analysis program written in C language and four real circuits were analyzed. In all cases, we found less than 5% of errors for both of gate andinterconnect circuit delays with a speedup factor ranging from a few tens to a few hundreds, compared to SPICE.SPICE.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.52-57
• /
• 2004

해체부지 선량평가 모델의 주요 핵종에 대한 key parameter를 분석하기 위하여 민감도 분석을 수행하였다. 본 연구에서 민감도 분석을 수행하기 위한 주요 가정 사항으로서 피폭시나리오는 가장 보수적인 resident farmer를 그리고 방사성핵종의 오염 정도는 0.037 Bq/g로 하였다. 분석결과, 감마 방출 핵종인 Cs-137과 Co-60의 경우에는 오염지역의 면적과 거주관련 변수(외부감마차폐인자와 실내 거주시간분율), C-14 핵종의 경우에는 환경변수와 불포화층의 수문학적 변수가, Sr-90 핵종의 경우에는 오염지역의 토양 밀도가 선량에 미치는 영향이 큰 parameter로 확인되었다.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.27-31
• /
• 2010

It is a well known fact that the LCD and Semiconductor Devices are a central part of IT industry which is important in the present and the future. But the biggest problem of Semiconductor and LCD manufacturing is maintaining a cleaning room environment. For this reason, the soft X-ray type Ionizer was used as the electrostatic reducer device, which protects damage of the product against electrostatic discharge in the manufacturing process. Therefore it is a essential important factor during Semiconductor and LCD production process. But the soft X-ray has a intrinsic problem with harmful to human being in case of soft X-ray exposure. That's reason we have the research to solve above problem and made an apparatus that it was covered with shielding structure to protect X-ray radiation to outside. And besides, it has a possibility to eliminate the charged electrostatic in the narrow space through the slot for Ion emissions with dual soft X-ray sources on the both side. It is also not make the particles from itself when it has been operated.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.365-366
• /
• 2002

A novel TEM resonator coil was developed for the imaging of small animals. The functional elements of the TEM resonator were 8 inner conductors, distributed in a cylindrical pattern and connected at the ends with capacitors to the cylindrical outer shield. The TEM resonator coil with cavity elements was robust to the surrounding influences due to the self-shielding structure. The TEM resonator coil with high Q factor could provide high quality MR images at 3.0T MRI system. Also, the TEM resonator coil has an advantage for a fine tune with length adjustment of each cavity elements. Thus, The TEM resonator coil at 3.0T, even higher field could be used in the research studies.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.921-928
• /
• 2013

A future nuclear energy system is being developed at Korea Atomic Energy Research Institute (KAERI), the system involves a Sodium Fast Reactor (SFR) linked with the pyro-process. The pyro-process produces a source material to fabricate a SFR fuel rod. Therefore, an isotopic fissile content assay is very important for fuel rod safety and SFR economics. A new technology for an analysis of isotopic fissile content has been proposed using a lead slowing down spectrometer (LSDS). The new technology has several features for a fissile analysis from spent fuel: direct isotopic fissile assay, no background interference, and no requirement from burnup history information. Several calculations were done on the designed spectrometer geometry: detection sensitivity, neutron energy spectrum analysis, neutron fission characteristics, self shielding analysis, and neutron production mechanism. The spectrum was well organized even at low neutron energy and the threshold fission chamber was a proper choice to get prompt fast fission neutrons. The characteristic fission signature was obtained in slowing down neutron energy from each fissile isotope. Another application of LSDS is for an optimum design of the spent fuel storage, maximization of the burnup credit and provision of the burnup code correction factor. Additionally, an isotopic fissile content assay will contribute to an increase in transparency and credibility for the utilization of spent fuel nuclear material, as internationally demanded.