• 한국방사선학회논문지
• /
• 제18권1호
• /
• pp.11-20
• /
• 2024

최근 인터벤션의 중요성이 증가한 만큼 시술을 수행하는 의료진의 건강에 대한 관심이 높아지고 있다. 기존의 방사선 차폐 기구는 시술자의 동선을 제한하고 감염의 위험으로 인해 적절하게 사용되지 못했으며 시술자의 생식선과 나아가 시술실 전체 영역의 적절한 방사선 차폐가 이루어지지 못했다. 시술 시 사용되는 팔꿈치 지지대에 차폐체(bismuth)를 부착하여 보조 차폐 기구를 제작하였고 방사선 차폐 효과를 측정하였다. 측정 결과, 평균 공간 선량률이 약 64.8% 감소하였으며 독립표본 T검정 분석 결과 유의확률 이하(p<0.05)로 통계학적으로 유의미하게 나타났다. 보조 차폐 기구의 사용은 시술자의 생식선 차폐 및 시술실 전체 영역의 방사선 공간 선량률을 감소시킬 수 있는 효과적인 차폐 방법으로 사료된다.

• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.241-249
• /
• 2016

The present study used a digital angiography x-ray device to measure the space dose and exposure dose of patients and practitioners using x-ray tube shielding devices developed in our laboratory. The intent of the study was to reduce the space dose within the test room, and to reduce the exposure dose of patients and practitioners. The patient and practitioner exposure doses were measured in five configurations in a human body model. The glass dosimeter was placed on the eye lenses, thyroid glands, left shoulder, right shoulder, and gonads. The beam was collimated at full size and at a 48% reduction for a comparative analysis of the measurements. The space dose was measured with an ion chamber at distances of 50 cm, 100 cm, and 150 cm from the x-ray tube under the following conditions: no shielding device; a shielding device made of 3-mm-thick lead (Pb) [Pb 3 mm shield], and a shielding device made of 3-mm-thick Pb (outside) and 3-mm-thick aluminum (Al) (inside) [Pb 3 mm＋Al 3 mm shield]. The absorbed dose was the lowest when the 3-mm-thick Pb＋3-mm-thick Al shield was used. For measurements made with collimated beams with a 48% reduction, the dose was the lowest at $154{\mu}Gy$ when the 3-mm-thick Pb＋3-mm-thick Al shield was used, and was $9{\mu}Gy$ lower than the measurements made with no shielding device. If the space dose can be reduced by 20% in all situations where the C-arm is employed by using the x-ray tube shielding devices developed in our laboratory, this is expected to play an important role in reducing the annual exposure dose for patients, practitioners, and assistants.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1817-1825
• /
• 2020

Background: Cosmic ray-induced particles can lead to failure of semiconductors packaged for export during air transport. This work performed MCNP 6.2 simulations to optimize shielding against neutrons and protons induced by cosmic radiation Methods and materials: The energy spectra of protons and neutrons by incident angle at the flight altitude were determined using atmospheric cuboid model. Various candidates for the shielding materials and the geometry of the Unit Load Device Container were evaluated to determine the conditions that allow optimal shielding at all sides of the container. Results: It was found that neutrons and protons, at the flight altitude, generally travel with a downward trajectory especially for the particles with high energy. This indicated that the largest number of particles struck the top of the container. Furthermore, the simulation results showed that, among the materials tested, borated polyethylene and stainless steel were the most optimal shielding materials. The optimal shielding structure was also determined with the weight limit of the container in consideration. Conclusions: Under the determined optimal shielding conditions, a significantly reduced number of neutrons and protons reach the contents inside the container, which ultimately reduces the possibility of semiconductor failure during air transport.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.756-761
• /
• 2019

본 논문에서는 기존 4H-SiC SJ UMOSFET 구조의 p-pillar을 기존 UMOSFET의 shielding 영역 아래로 배치시키는 SC-SJ(Shielding Connected-Super Junction) UMOSFET 구조를 제안한다. 제안한 SC-SJ UMOSFET의 경우 p-pillar와 shielding 영역이 공존하여 산화막에서 전계에 의한 항복이 발생하지 않도록 하며, 이는 pillar의 도핑 농도 상승을 가능하게 한다. 결과적으로 온저항을 낮춤으로서 소자의 정적 특성을 개선한다. Sentaurus TCAD 시뮬레이션을 통해 기존 구조와 제안한 구조의 정적 특성을 비교, 분석하였다. 제안한 SC-SJ UMOSFET은 기존 구조에 비해 항복전압의 변화 없이 50% 감소된 온저항을 얻을 수 있다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권3호
• /
• pp.187-194
• /
• 2020

Bone mineral density is a examination to measure the amount of bone in patients with metabolic bone disease. It is a low dose, but may cause unnecessary exposure to the gonads and other organs located in the periphery when examining the lumbar and proximal femurs. Therefore, the purpose of this study was to evaluated the exposure dose for each organ exposed during the bone mineral density through simulation, and analyzed the applicability of the subject to radiation shielding devices using 3D printing materials. As a result, the highest dose was shown at 11.47 uSv in the breast during lumbar examination and 8.98 uSv in the testis during proximal femur examination. Also, the farther away from the examination site, the lower the effect of the scattering-ray. The shielding effect of using 3D printing shielding device showed high results in proportion to the effective atomic number and specific gravity of the printing material. Among the printing materials, ABS + W showed an effect of at least 78.72 to 96.3 9% compared to the existing lead material.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.247-251
• /
• 2007

The recessed gate IGBT has a lower on-state voltage drop compared with the DMOS IGBT, because there is no JFET resistance. But because of the electric field concentration in the corner of the gate edge, the breakdown voltage decreases. This paper is about the new structure to effectively improve the Vce(sat) voltage without breakdown voltage drop in 1700V NPT type recessed gate IGBT with p floating shielding layer. For the fabrication of the recessed gate IGBT with p floating shielding layer, it is necessary to perform the only one implant step for the shielding layer. Analysis on the Breakdown voltage shows the improved values compared to the conventional recessed gate IGBT structures. The result shows the improvement on Breakdown voltage without worsening other characteristics of the device. The electrical characteristics were studied by MEDICI simulation results.

• 대한방사선치료학회지
• /
• 제21권1호
• /
• pp.9-15
• /
• 2009

목 적: 음경암(carcinoma of the penis)의 방사선치료 시 발생되는 산란선으로부터 고환(testis)을 보호하고, 치료 자세 재현성을 유지하기 위한 device를 제작하여 유용성을 평가하였다. 대상 및 방법: 팬텀(Phantom)고환은 바셀린 거즈로 제작하였으며, device는 두께 5 mm 아크릴과 4 mm 납으로 제작하였다. 조사야는 $3{\times}3\;cm^2$, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$, $6{\times}6\;cm^2$, $7{\times}7\;cm^2$ 그리고 조사야 경계면에서부터 고환의 거리는 4~10 cm까지 1 cm 간격으로 이격(離隔)하였으며, 팬텀고환 부위의 산란선량을 차폐 전과 후 각각 10회 측정하였다. 6 MV X선을 이용하여 200 cGy를 조사하였다. 결 과: 미차폐 시 거리(4~10 cm)에 따라 14.8~4.7 cGy ($3{\times}3\;cm^2$), 15.7~5.2 cGy ($4{\times}4\;cm^2$), 17.6~5.5 cGy ($5{\times}5\;cm^2$), 19.9~6.6 cGy ($6{\times}6\;cm^2$), 22.2~7.6 cGy (7x7 cm2)의 산란선량이 측정 되었고, 차폐 시에는 7.1~2.6 cGy ($3{\times}3\;cm^2$), 8.9~3.6 cGy ($4{\times}4\;cm^2$), 12.3~4.8 cGy (5x5 cm2), 14.6~5.0 cGy ($6{\times}6\;cm^2$), 21.1~6.4 cGy ($7{\times}7\;cm^2$)로 감소하였으며, 차폐 전과 후 감소폭은 조사야 크기($3{\times}3~7{\times}7\;cm^2$)에 따라 7.8∼1.1 cGy (4 cm), 5.1~1.2 cGy (5 cm), 3.8~1.1 cGy (6 cm), 3.4~1.7 cGy (7cm), 2.8~1.7 cGy (8 cm), 2.4~2.5 cGy (9 cm), 2.1~1.8 cGy (10 cm) 거리에(4∼10 cm)에 따른 감소폭은 7.8~2.1 cGy ($3{\times}3\;cm^2$), 6.9~1.6 cGy ($4{\times}4\;cm^2$), 5.3~0.8 cGy ($5{\times}5\;cm^2$), 5.3~1.5 cGy ($6{\times}6\;cm^2$), 1.1~1.8 cGy ($7{\times}7\;cm^2$) 측정되었다. 결 론: 음경암의 방사선치료 시 자체 제작한 device를 사용하여 팬텀고환 주변의 산란선 측정결과 device 사용 시 거리를 이격과 팬텀고환 주위를 차폐함으로 불필요한 피폭을 줄 일수 있었다.

• 대한방사선치료학회지
• /
• 제9권1호
• /
• pp.40-45
• /
• 1997

When therapeutic irradiation is indicated for the orbital tumors, the greatest concern is the risk of radiation-induced cataract. Conjunctival lymphoma is one of the good examples. We would like to report the procedure of the lens shielding device(L.S.D) and the result of irradiated dose to the lens. L.S.D. consistes of two parts : load alloy to attenuate electron beam, and dental acryl which completely covers the lead alloy to avoid discomfort of cornea from contacting directly with cerrobend and side scattering by cerrobend. And for easy location and removal, side bars were made on each side. Radiation doses were meaured with TLD(TLD 3500 Hawshaw). Markus chamber in a polystyrene phantom. The phantom was irradiated with 9MeV electron beams from Clinac 2100C with $6{\times}6cm$ electron cone. The relative dose at 6mm depth where the lens is located was $4.2\%$ with TLD and $5.1\%$ with Markus chamber clinically when 2600 cGy are irradiated to the eyeball, the mapinary dose to the lens will be 109 cGy or 132 cGy, which will significently reduce the cataract.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.81-86
• /
• 2015

This study investigated electromagnetic interference (EMI) shielding effectiveness (SE) of hybrid conductive fabrics. The coaxial transmission line method was used to measure the EMI Shielding effectiveness of the conductive fabrics. We designed and constructed a measuring system, consisting of a network analyzer and a device that serves as a sample holder and at the same time as a transmission medium of incident electromagnetic waves. The measurements of SE were carried out in a frequency range from 100 MHz to 2 GHz. The results of the EMI shielding experiments showed that the maximum electromagnetic shielding effectiveness (EMSE) values of sandwich type C/A/C (carbon fiber sheet/aluminum foil tape/carbon fiber sheet) and C/Ni/C (carbon fiber sheet/magnetic shielding foil/carbon fiber sheet) samples were 55 dB and 113 dB, respectively, at a frequency of 1.9 GHz.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.