• Title/Summary/Keyword: Shield Case

검색결과 203건 처리시간 0.028초

실드터널 시공단계를 고려한 2차원 탄.점소성 유한요소해석 (Two-Dimensional Elasto-Viscoplastic Finite Element Analysis Considering Shield Tunneling Construction Stages)

  • 진치섭;노경배;한상중
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1996년도 가을 학술발표회 논문집
    • /
    • pp.89-94
    • /
    • 1996
  • The use of shield is increasing day by day, because it's method is advantageous tunneling method to soft and collapsible ground. In case of analyzing shield tunnel by FEM, short term behavior of ground by initial heaving and tail void closure and long terms of it because of consolidation by changes of pore pressures in clay must be considered. In this paper, the shield tunneling construction stages was analyzed from 2 dimensional elasto - viscoplastic finite element program used Mohr - Coulomb yield criterion but not considered the changes of pore pressures. The object of investigation was N - 2 Tunnel. Since the good results of analysis compared to the measured behavior of ground for heaving, tail void closure and liner installation, this results can be applied to design and construction of shield tunneling for the subways, sewage lines etc.

  • PDF

진공인터럽터 외부쉴드가 절연성능에 미치는 영향 분석 (An Analysis of Insulation Performance Result from Shield of Outside Vacuum interrupter)

  • 윤재훈;임기조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.100-100
    • /
    • 2010
  • Because of power consumption increase, global wanning, and limitation of installation, not only high reliability and interruption capability but also compact and light power apparatuses are needed. To improve the insulation performance, the high E field concentration phenomena was considered. Breakdown mechanism in vacuum is different from that in other insulation materials. therefore, It is necessary to understand the electric field distribution and insulation characteristics. This paper discusses the simulation and LI(light impulse) test of the shield of outside vacuum interrupter As a result, FEM simulation and LI test show that improve distribution of electrical field and equi-potential line. due to external shield. in this case, outside shield induced electric field of triple junction point.

  • PDF

화강풍화대를 통과하는 슬러리 TBM의 체적손실 산정에 대한 사례 연구 (Case study of volume loss estimation during slurry tbm tunnelling in weathered zone of granite rock)

  • 박현구;오주영;장석부;이승복
    • 한국터널지하공간학회 논문집
    • /
    • 제18권1호
    • /
    • pp.61-74
    • /
    • 2016
  • 본 논문에서는 화강풍화대를 통과하는 슬러리 TBM 굴진 중 지표 침하 및 체적손실 산정에 관한 사례 연구를 수행하였다. 터널 천단 침하 계측 결과로부터 TBM 굴진 단계별 침하 발생 경향을 분석하였고, 횡방향 지표 침하 트라프로부터 굴진 중 체적손실 및 트라프 변수를 산정하였다. 또한, 체적손실 산정 모델을 이용하여 지반 특성과 굴진 중 측정된 기계데이터가 반영된 굴진 단계별 체적손실을 산정하였으며, 이를 실제 계측 결과와 비교 분석하였다. 슬러리 TBM의 경우 대부분의 지표침하는 쉴드 본체 통과 및 뒤채움 주입 이후 발생하는 것으로 나타났고 문헌에 보고된 총 체적손실 및 트라프 곡선 형태가 확인되었다. 실제 굴진 중 체적손실은 굴진 단계별로 쉴드손실 예측값의 90%, 테일부 손실 예측값의 60% 수준으로 분석되었고, 쉴드 손실에 비해 테일부 손실의 편차가 큰 것으로 나타났다.

External dose assessment for workers dismantling the bio-shield of a commercial power nuclear reactor: Case study of Kori-1, Korea

  • Lee, ChoongWie;Lee, Donghyun;Kim, Hee Reyoung;Lee, Seung Jun
    • Nuclear Engineering and Technology
    • /
    • 제52권9호
    • /
    • pp.2085-2091
    • /
    • 2020
  • The license for Kori-1, the first commercial reactor in Busan, Korea, was terminated in June 2017; therefore, preparations are being made for its decommissioning. Because the radioactivity of Bio-shield varies greatly throughout the structure, the doses received by the workers depend on the location, order, and duration of dismantling operations. Thus, a model for evaluating the worker external dose during the dismantling of the Kori-1 bio-shield was developed, and work scenarios for dose assessment were designed. The Dose evaluation code VISIPLAN was used for dose assessment. The dose rate around the bio-shield was evaluated and the level of exposure to the operator was evaluated according to the work scenario. The maximum annual external dose was calculated as 746.86 mSv for a diamond wire saw operator under dry cutting conditions, indicating that appropriate protective measures, such as changing dismantling sequence, remote monitoring, shield installation, and adjustment of work team are necessary for the safe dismantling of the bio-shield. Through these protective measures, it was found that the worker's dose could be below the dose limit.

Deformation analyses during subway shield excavation considering stiffness influences of underground structures

  • Zhang, Zhi-guo;Zhao, Qi-hua;Zhang, Meng-xi
    • Geomechanics and Engineering
    • /
    • 제11권1호
    • /
    • pp.117-139
    • /
    • 2016
  • Previous studies for soil movements induced by tunneling have primarily focused on the free soil displacements. However, the stiffness of existing structures is expected to alter tunneling-induced ground movements, the sheltering influences for underground structures should be included. Furthermore, minimal attention has been given to the settings for the shield machine's operation parameters during the process of tunnels crossing above and below existing tunnels. Based on the Shanghai railway project, the soil movements induced by an earth pressure balance (EPB) shield considering the sheltering effects of existing tunnels are presented by the simplified theoretical method, the three-dimensional finite element (3D FE) simulation method, and the in-situ monitoring method. The deformation prediction of existing tunnels during complex traversing process is also presented. In addition, the deformation controlling safety measurements are carried out simultaneously to obtain the settings for the shield propulsion parameters, including earth pressure for cutting open, synchronized grouting, propulsion speed, and cutter head torque. It appears that the sheltering effects of underground structures have a great influence on ground movements caused by tunneling. The error obtained by the previous simplified methods based on the free soil displacements cannot be dismissed when encountering many existing structures.

DTM으로부터 지형변수의 추출 및 분석: 제주도 사례연구 (Extraction and Analysis of Topographic Variables from DTM: A Case Study in Jeju Island)

  • 김석중;조성현;김형찬
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제9권3호
    • /
    • pp.56-61
    • /
    • 2004
  • 강수현상에 영향을 주는 지형변수들을 고도(ELEV), 경사(SLOPE), 바다까지의 거리(SEA), 방해물(OBST), 방벽(BAR), 굴곡도(SHIELD)로 구분하여 해상도별로 추출하고 분석하였다. 해상도는 50 m DTM (Digital Terrain Model)을 기본으로 하여 100m, 200m, 400m, 600m, 800m, 그리고 1,000m로 분석하였다. 이때 해상도 분석은 TOVA (Topographic Variables Extraction Program)를 이용하였다. 제주 기상관측소를 사례로 지형변수를 분석한 결과 전반적으로 해상도에 따른 값의 변화는 8개의 주방위선에 따른 변화보다 적지만 특히 SHIELD 변수값과 해상도 600m의 경우에는 의미 있게 나타났다.

E.P.B(Earth Pressure Balance) Shield TBM 공사의 공기지연 사례연구 (A Case Study of Delay Analysis for E.P.B Shield TBM Method in Construction Site)

  • 곽준환;박형근
    • 대한토목학회논문집
    • /
    • 제29권6D호
    • /
    • pp.737-743
    • /
    • 2009
  • 터널 공사에 있어서 Shield TBM 장비의 활용이 증가함에 따라 Shield 공법의 효율성 증대를 위한 다양한 연구 또한 수행되어졌다. Shield TBM에 대한 연구들은 대부분 굴착 대상이 되는 지반의 특성을 고려하여 Shield TBM 장비 선정, 굴진속도 계산, 모델식 개발 등에 초점을 맞추고 있으며, 굴착의 주체가 되는 Shield TBM 장비와 장비에 의해 발생하는 트러블로 인한 공기지연에 대한 연구는 수행되어지지 않았다. 따라서 본 연구에서는, Shield 터널 공사 중 Shield 장비의 초기굴진을 대상으로 하여, 굴진 시 발생하는 트러블에 의해 야기되는 공기지연 시간 및 원인을 FMEA기법을 이용하여 분석하였고, 공기지연 방지를 위한 관리 방한의 제시를 목적으로 각각의 트러블 항목들에 대한 우선순위를 결정하는 연구를 수행하였다. 그 결과 이전까지의 연구들에서 지반적 요소들에 비해 상대적으로 소홀히 다루어진 Shield TBM의 기계적 요소들의 트러블이 공기지연을 일으키는 주요 원인이라는 것을 알 수 있었다. 각각의 공기지연 발생 요소 중 공기지연 위험도가 큰 몇몇 항목을 대상으로 트러블 관리방안을 제시함으로써, 본 굴진 및 향후 유사 조건의 프로젝트 수행 시 보다 효율적으로 공사를 수행할 수 있을 것으로 기대된다.

축소모형실험을 통한 급곡선 터널에서의 Shield TBM 추진 압력 적용 기술에 대한 연구 (Application technique on thrust jacking pressure of shield TBM in the sharp curved tunnel alignment by model tests)

  • 강시온;김협;김용민;김상환
    • 한국터널지하공간학회 논문집
    • /
    • 제19권2호
    • /
    • pp.335-353
    • /
    • 2017
  • 본 연구는 축소모형 실험을 통하여 급곡선 터널에서의 쉴드 TBM 추진압력 적용 기술에 대한 논문이다. 최근 한국의 도심지 지역에서 NATM 터널 공사에 발생하는 진동 및 소음 문제를 예방하기 위해 기계식 터널공법인 쉴드 TBM 공법의 적용이 증가하고 있다. 그러나 건물 기초 및 지하 구조물을 피하기 위해 터널 선형이 급곡선으로 계획하여야 하며 쉴드 TBM 추진압력 시스템에 대한 적용 기술의 개발이 요구된다. 따라서 곡선구간에 대한 쉴드 TBM 굴진 시 영향을 주는 주요 요소들에 대하여 시공자료와 이론적 접근방법에 대하여 검토 및 분석을 실시하였다. 분석결과로부터 쉴드 TBM 추진압력 시스템에 대한 기술이 급곡선 터널에 있어서 가장 중요한 것으로 나타났다. 또한 지반과 쉴드 TBM 헤드부의 상호 거동에 대한 실질적인 상황을 시뮬레이션 하기 위하여 축소모형시험을 실시하였다. 2가지의 서로 다른 쉴드 추진력과 여러 중절각도에 따라 쉴드 TBM 헤드에 가해지는 지반압력에 대하여 측정하였다. 이 실험으로부터 얻어진 결과를 분석 하였다. 이들 결과는 급곡구간 터널에서 쉴드 TBM 추진 압력에 따른 쉴드 TBM 헤드부의 상호거동에 대한 이해와 운영기술 발전에 매우 유용할 것이다.

양끝이 열린 실드케이스의 FEM해석 (EEM Analysis of Open-Typed Cylindrical Shieldcase)

  • 김영학
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.767-769
    • /
    • 2017
  • 다중 셀 구조를 가지고 양끝이 열린 원통형 실드케이스를 3차원 유한요소법으로 해석하였다. 해석공간의 크기는 $2m{\times}2m{\times}2m$였고 원통형 실드케이스의 크기는 길이가 0.6m이고 반경이 0.1m, 0.08m, 0.06m, 0.04m, 두께는 모두 1mm였다. 실드케이스의 재질은 금속자성체로 투자율을 50,000으로 하였다. 기준자계는 수평방향이 24A/m, 수직방향이 36A/m인 지자계로 하였고 이것을 경계조건으로 하였다. 또한 해석 시에는 실드케이스의 길이방향을 지자계의 수평방향에 $0^{\circ}$ 그리고 $90^{\circ}$로 배치하였다. 실드케이스의 중심에서의 자계는 실드케이스의 층수의 증가에 따라 감소하였으며 $0^{\circ}$로 하였을 때, $4.45{\times}10^{-2}A/m$였고 $90^{\circ}$로 회전하였을 때, $6.66{\times}10^{-4}A/m$였다.

  • PDF

임산부 흉부촬영 시 복부차폐의 적정성 평가 (Adequacy Assessment to Abdomen Shield of Pregnant X-ray Chest PA)

  • 김기진;김가중
    • 대한안전경영과학회지
    • /
    • 제17권4호
    • /
    • pp.207-212
    • /
    • 2015
  • When performing Chest x-ray examination to pregnant woman, normally we shield back side of abdomen. In this situation, scattered rays made by equipment and surrounding structure can enter front side of abdomen. Therefore, in this study, we evaluate suitability of abdomen shield especially to pregnant woman. In case of One shielding material placed back of abdomen, the measured value is $0.676{\pm}0.19uSv/hr$. Two shielding material is $0.764{\pm}0.04uSv/hr$. Three is $0.685{\pm}0.16uSv/hr$. The exposure dose inferred in this study does not excess annual effective dose limit. But It is not mean absolute safety. So we have to minimize occurrence of stochastic effect of radiosensitivity by shielding front side of abdomen of pregnant woman in clinic.