• 대한조선학회지
• /
• 제24권1호
• /
• pp.42-50
• /
• 1987

The energy expressions are formulated for the axially stiffened shell treating the stiffeners as discrete elements. The principle of minimum potential energy is employed to formulate the buckling equations for a simply supported, axially stiffened shell under uniform axial compression. The displacement functions are expended into double trigonometric series. The mode assuming method employed in this paper makes it possible to reduce the matrix size of the eigenvalue problem considerably. Effects are made to investigate the transition from overall buckling to local buckling and to verify the existence of the minimum stiffness ratio of stiffener as in the case of stiffened plate. The results of the calculation show that the critical stiffener size increase linearly as the length of the shell increases. The results also show that the overall buckling load decreases and the local buckling load has a nearly constant value as the length of the shell increases. The results show very good agreements with other computational available.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.301-307
• /
• 2014

We have fabricated $SnO_2$/Zn core-shell nanowires by employing a sputtering technique with a Zn target. Scanning electron microscopy indicated that the surface of the nanowires became rougher by the coating. X-ray diffraction of the coated nanowires exhibited the hexagonal Zn diffraction peaks. TEM image of coated structures showed that shell layer was mainly comprised of hexagonal Zn phase. EDX spectra suggested that the shell layer consisted of Zn elements. The photoluminescence spectrum of the coated nanowires in conjunction with Gaussian fitting analysis revealed that the emission was disconvoluted with three Gaussian functions, which are centered at 2.1 eV in the yellow region, 2.4 eV in the green region, and 3.3 eV in the ultraviolet region. We speculated the possible mechanisms of these emission peaks.

• 대한토목학회논문집
• /
• 제28권6A호
• /
• pp.779-788
• /
• 2008

본 논문에서는 편재하된 하중이 작용하는 제형 다실 박스거더의 정확한 뒤틀림 거동규명을 위해 3차원 쉘 요소를 사용한 해석법이 제안된다. 쉘 요소를 사용한 독립적인 뒤틀림 해석을 위해서는 정확한 뒤틀림 하중을 산정해야 하는데 본 논문에서는 정역학적인 힘의 평형조건 및 중첩의 원리를 토대로 작용하는 편재하된 하중을 제형 다실 박스거더의 주요한 거동을 유발하는 하중들로 분해하는 하중분해식을 유도하였다. 제안된 하중분해식에 의해 편재하된 하중은 휨과 비틂 그리고 뒤틀림 거동을 유발하는 하중들로 분해되고 이렇게 분해된 하중들을 쉘 요소에 적용하면 각 거동의 독립적인 해석결과를 얻을 수 있다. 이러한 독립적인 해석법은 다실 박스거더의 주요 거동의 역학적 특성을 이해하는 데 매우 유용할 것이고 특히 박스거더의 뒤틀림 거동에 대해 명확히 규명할 수 있는 기반을 마련할 수 있을 것이다. 그리고 현장의 설계자가 복잡한 뒤틀림 상수들을 계산하지 않고도 간단한 쉘요소 모델을 이용하여 독립적인 뒤틀림 해석을 수행할 수 있도록 큰 도움을 줄 수 있을 것이다.

• 한국주조공학회지
• /
• 제5권4호
• /
• pp.243-257
• /
• 1985

Many authors have studied the solidification process of cast iron and the effect of grain boundaries in austenite shell on the growth of spheroidal graphite. But, the studies on the melting morphology of cast iron are rare and the effect of grain boundaries in austenite shell on the melting procedure of spheroidal graphite cast iron is unknown. Therefore, in this work, the melting procedure of cast iron and the role of grain boundaries in austenite shell on the melting of spheroidal graphite have been studied. The main results are summarized as follows. 1. In white cast iron containing silicon, melting initiates at the interface between austenite matrix and temper carbon which was decomposed from $Fe_3C$ during heating. 2. In gray cast iron, melting initiates at the boundary of eutectic cell where elements with low melting temperature are condensed. The dissolution of kish graphite is difficult. 3. In spheroidal graphite cast iron containing little phosphor, melting initiates at the outer region of austenite shell in which silicon is condensed. In this case, grain boundaries in austenite shell give little effect on the melting procedure of spheroidal graphite. 4. In spheroidal graphite cast iron containing phosphor above 0.3 wt%, its melting phenomena are changed with heating rate due to the existence of steadite. In this case, it can be concluded that liquid phase of steadite, which segregated on outer region of austenite shell, moves to spheroidal graphite-austenite interface along the grain boundaries in austenite shell.

• Structural Engineering and Mechanics
• /
• 제18권1호
• /
• pp.41-58
• /
• 2004

The postbuckling behaviour of thin shells has fascinated researchers because the theoretical prediction and their experimental verification are often different. In reality, shell panels possess small imperfections and these can cause large reduction in static buckling strength. This is more relevant in thin laminated composite shells. To study the postbuckling behaviour of thin, imperfect laminated composite shells using finite elements, explicit incremental or secant matrices have been presented in this paper. These incremental matrices which are derived using Marguerre's shallow shell theory can be used in combination with any thin plate/shell finite element (Classical Laminated Plate Theory - CLPT) and can be easily extended to the First Order Shear deformation Theory (FOST). The advantage of the present formulation is that it involves no numerical approximation in forming total potential energy of the shell during large deformations as opposed to earlier approximate formulations published in the literature. The initial imperfection in shells could be modeled by simply adjusting the ordinate of the shell forms. The present formulation is very easy to implement in any existing finite element codes. The secant matrices presented in this paper are shown to be very accurate in tracing the postbuckling behaviour of thin isotropic and laminated composite shells with general initial imperfections.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.77-85
• /
• 2020

In this study, we proposed a method to replace the solid finite element model of the boiler membrane wall for coal-fired power plants using an equivalent shell model. The application of a bending load to the membrane wall creates greater displacement at both ends of the central portion when compared with the middle when an isotropic elastic constant is used in the shell model. This is inconsistent with the results of the solid model where the central portion is uniformly deformed. Here, we presented a method to determine the orthotropic elastic constants of the shell model in terms of bending stiffness and vibration characteristics to solve this problem. Our analysis of the orthotropic shell model showed that the error ratio was 0.9% for the maximum displacement due to the bending load, 0.3% for the first natural frequency, and 2.5% for the second natural frequency when compared with the solid model. In conclusion, a complicated boiler membrane wall composed of a large number of pipes and fins can be replaced with a simple shell model that shows equivalent bending stiffness and vibration characteristics using our proposed method.

• 보존과학회지
• /
• 제38권1호
• /
• pp.55-63
• /
• 2022

The Bigyeokjincheolloe (bomb shell), a scientific cultural heritage, has outstanding historical value for sustaining a gunpowder weapon of Joseon. In this study, the bomb shell was modeled through three-dimensional (3D) scanning centered on the external shape and 𝛾-ray radiography-based on the internal shape. In particular, to improve the contrast in the radiographic image, optimization and image processing were performed. After these processes, the thickness of the inner wall (2.5 cm on average) and the positions of the three mold chaplets were clearly revealed. For exhibition purposes, the 3D model of the bomb shell was output to a 3D printer and the output was rendered realistic by coloring. In addition, the internal functional elements, such as Mokgok, fuse, mud, gunpowder, and caltrops, were reproduced through handwork. The results will contribute to the study of digital heritages in two ways. First, the internal and external shapes of the bomb shell were modeled by fusing two different technologies, namely, 3D scanning and 𝛾-ray radiography. Second, the internal shape of the bomb shell was constructed from the original form data and the reproduction was utilized for museum exhibitions. The developed modeling approach will greatly expand the scope of museum exhibitions, from those centered on historical content to those centered on scientific content.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.335-341
• /
• 2009

본 논문에서는 MLS기반 유한요소에 대한 현재 개발상황에 대한 개관과 향후 예상할 수 있는 응용분야에 대한 제안을 하였다. 이동최소제곱근사를 이용하여 형상함수를 생성하는 MLS기반 유한요소는, 요소의 경계에서 기존 유한요소의 성질-크로네커 델타 조건-을 가지면서도 기존 요소가 갖지 못했던 임의의 절점 추가가 자유롭다는 장점이 있어 다양한 변절점 요소로의 개발이 이루어져 왔다. 선형 또는 이차형상함수를 갖는 2차원 변절점요소 뿐 아니라, 균열선단과 균열면을 포함하고 있는 2차원 균열요소와 3차원에서의 제한적인 변절점요소 등이 개발되어 다양한 불연속성 문제에 적용 가능함이 입증되었다. 이러한 MLS기반 유한요소는 향후 2차원 변절점 3각요소, 2차원 삼각균열요소, 변절점 쉘요소, 균열 쉘요소, 마칭큐브알고리즘에 적합한 3차원 다면체요소로의 개발이 가능할 것으로 예상되며, 본 논문에서는 그 일례로 3차원 다면체요소를 이용한 대퇴골의 요소망 생성을 보였다.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.265-272
• /
• 2007

본 논문에서는 적응적 h-유한요소 세분화에 의한 박스형 절판 구조물의 선형좌굴 유한요소해석법을 제안한다. 면내회전 자유도를 갖는 변절점 평판쉘유한요소를 사용하여 유한요소의 거동을 개선하고 6자유도를 갖는 다른 유한요소와의 자유도의 연결을 용이하게 한다. 이와 같이 개발된 평판쉘유한요소에 의하여 박스형 절판구조물의 정확한 구조해석이 가능한데, 변절점유한요소를 정식화함으로써 적응적 h-유한요소 세분화시에 발생하는 다른 패턴의 사각형 유한요소 세분화망의 연결을 용이하게 해결한다. 오차평가에 대한 개선된 응력장을 얻기 위하여 상위수렴 조각회복법을 적용한다. 이와 같이 상위수렴 조각회복법에 의한 개선된 응력장에 의하여 구성된 유한요소 세분화망을 이용하여 좌굴하중과 좌굴모드를 자동적으로 구할 수 있도록 한다.

• 전산구조공학
• /
• 제1권1호
• /
• pp.67-78
• /
• 1988

이 연구에서는 새로운 쉘요소분해의 방법을 정립하고, 이에 의거하여 간단하고, 효율성이 높고, 보편성이 큰 쉘 유한요소를 개발하고자 하였다. 실제의 요소는 개념적인 Translational Element와 Difference Element로 분해되며, 요소의 변위함수는 이 두 성분요소의 변위함수를 결합하여 얻는다. 요소분해의 기본가정을 달리함에 따라서 세가지의 기본형요소에 도달할 수 있다. 기본형요소를 보완하여 Locking현상을 제거하고 수렴성을 높히는 방안으로서 감착적분, 내용자유도의 추가 및 Mixed Fomulation을 검토하였으며, 요소의 Spurious Mode를 제어하는 방법을 고안하였다. 수치분석을 통해서 요소의 유효성과 효율성을 검정하였다.