• 한국광학회지
• /
• 제13권4호
• /
• pp.363-369
• /
• 2002

디스플레이 기기에 사용할 수 있는 전도성 투과필터를 저방출(low-emissivity) 코팅인 [유전체|Ag|유전체] 구조를 이용하여 설계하였다. [$TiO_{2}$|Ti|Ag|$TiO_{2}$] 구조를 반복하고 어드미턴스 방법을 이용하여 가시광선 영역의 투과율을 높이고, 근적외선의 투과율은 낮게 하였다. 전도성 투과필터를 radio frequency(RF) 마그네트론 스퍼터링 방법으로 증착하고 설계한 스펙트럼과 비교하였으며, 필터의 광학적, 구조적, 전기적 특성들을 조사하였다. Ag 박막의 두께는 전기전도성을 높이기 위해 13㎚ 이상으로 증착하고, $TiO_{2}$박막은 가시광선 영역에서 투과율이 최대가 되는 24㎚로 증착하였다. 또한 Ag 박막의 산화를 막기 위해 매우 얇은 Ti 산화방지막을 증착하였으며, 다층구조로 갈수록 산화방지막의 두께를 더 두껍게 증착해야 하는 것을 확인하였다. 최종적으로 [$TiO_{2}$|Ti|Ag|$TiO_{2}$] 기본구조를 3번 반복하여 증착한 필터는 근적외선 차단 효과가 우수하고, 전자파 장해(electromagnetic interference; EMI)를 효과적으로 방지할 수 있는 2Ω/□ 이하의 낮은 면저항을 보였다.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.706-712
• /
• 2014

The inverters used to drive Brushless DC motors (BLDC) include switching devices such as FETs and the faults in FETs cause severe performance degradation in systems where a BLDC acts as actuator. This paper presents a fault detection and isolation method for the FETs of an inverter for BLDC motor control systems, which is based on the EKF (Extended Kalman filter). Firstly, an equivalent circuit model for a BLDC motor plus its inverter system was derived. Secondly, a state-space equation was established, where the on-resistance of the FETs is expressed as a state variable and the EKF equation estimates the on-resistance. If the estimated resistance differs greatly from the known value, it can be asserted that there is a fault on that FET. Thirdly, the local convergence of the established EKF was proved. Finally, through the experiments, the performance of the proposed method was verified. The results show that the on-resistance is estimated close to the value specified in the FET data sheet in normal operation, whereas the estimated resistance is a much larger value than the normal one in case an FET fault occurs. Therefore, it is confirmed that the proposed fault detection and isolation method works appropriately in real systems.

• 한국초지조사료학회지
• /
• 제15권2호
• /
• pp.80-86
• /
• 1995

High salinity common in reclaimed soil can reduce germination of crop seeds and aftermath its establishment and production. The experiment was done to measure germination and radicle elongation of berseem, subterranean, white clover and Italian ryegrass as Control under different temperature and NaCl concentrations. Onehundred seeds of berseem (Trifolium ulexandrinum cv. Bigbee). suberranean (T. suhterruneum, cv. Nungarin), white clover (T. repens, cv. Regal) and Italian ryegrass (Lolium mulriflorum, cv. Terafloum) were placed in petri dishes with a sheet of filter paper replaced every two days, and then exposed to 0, 12.5, 25. 50, 100 and 200mh4 of sodium chloride in darkened growth chambers controlled with 10, 15 and $20^{\circ}C$. Percent germination and radicle elongation were measured. Beneem clover showed greatest daily percent germination among the cloven. That of subterranean clover, moreover, was higher than that of white clover till 4 days after imbibition but the reverse result was true thereafter. Although germination of Italian ryegrass was delayed with decreased at 200mM of NaCl of $20^{\circ}C$. at 200mM of under$15^{\circ}C$ , and at higher than lOOmh4 of all level of temperature, respectively. Berseem clover had greatest radicle length under the same concentration of NaCl regardless of temperature treatment while radicle elongation of subterranean and white clover was repressed over 50-100mM of NaC1. The slope of linear regression equation between concentration of NaCl and percent germination declined under all temperature treatment in order of berseem, subterranean and white clover whereas the reverse result was showed in radicle length.

• 핵의학기술
• /
• 제13권1호
• /
• pp.63-66
• /
• 2009

Purpose: ACR (American College of Radiology) offers variable parameters to PET/CT quality control by using ACR Phantom. ACR Phantom was made to evaluate parameters which are uniformity, attenuation, scatter, contrast and resolution. Manual analysis method wasn't good for the use of QC because values of parameter were changed as it may user and it takes long time to analysis. Ki-Chun Lim, a nuclear scientist in AMC, developed program that automatically analysis values of parameter by using ACR Phantom to overcome above problems. In this study, we evaluated automatic analysis program's usability, through the comparing SUV of each method, reproducibility of SUV when repeated analysis and the time required. Materials and Methods: Using Flangeless Esser PET Phantom, the ideal ratio of 4 : 1 hot cylinder and BKG but it actually showed a ratio of 3.89 to 1 hot cylinder and BKG. SIEMENS Biograph True Point 40 was used in this study. We obtained images using ACR phantom at Fusion WB PET Scan condition (2 min/bed) and 120 kV, 100 mAs CT condition. Using True X method, 3 iterations, 14 subsets, Gaussian filter, FWHM 4 mm and Zoom Factor 1.0, $168{\times}168$ image size. We obtained Max. & Min. SUV and SUV Mean values at Cylinder (8, 12, 16, 25 mm, Air, Bone, Water, BKG) by automatic program and obtained SUV by manual method. After that, we compared manual and automatic method. we estimate the time required from opened the image data to final work sheet was completed. Results: Automatic program always showed same result and same the time required. At 8, 12, 16 and 25 m cylinder, manual method showed 6.69, 3.46, 2.59, 1.24 CV values. The larger cylinder size became, the smaller CV became. In manual method, bone, air, water's CV were over 9.9 except BKG (2.32). Obtained CV of Mean SUV showed BKG was low (0.85) and bone was high (7.52). The time required was 45 second, 882 second respectably. Conclusions: As a result of difference automatic method and manual method, automatic method showed always same result, manual method showed that the smaller hot cylinders became, the lager CV became. Hot cylinders mean region size, the smaller hot cylinder size becomes we had some trouble in doing ROI poison setting. And it means increase in variation of SUV. The Study showed the time required of automatic method was shorten then manual method.

• 한국물환경학회지
• /
• 제20권5호
• /
• pp.500-505
• /
• 2004

While more attention has been paid in recent years to urban point source pollution control, no considerable measures have been taken to control urban non-point source pollution. Contaminants from non-point sources deposited on urban impermeable surfaces such as road and highway are easily released to the public waters by rainfall, leading to the deterioration in water quality in urban area. The present study investigated a system using filter media to reduce the level of contamination in urban road runoff. Three different media, designated as J-P (polypropylene, blowing type), B-P (polypropylene, fiber type), and P-F (Polyvinyl alcohol, cube and sheet type) were evaluated on the basis of pollutant removal efficiency as well as hydraulic property. Experiments were peformed using a 1/4-scale treatment unit at various pollutant roading and rainfall intensity with real rainwater runoff collected from road surfaces. The results at different rainfall intensities shows that the medium J-P is superior to the other media for water permeability. J-P was not blocked at 10 mm/hr rainfall and its permeability was stable. On the other hand, B-P and P-F resulted in substantial overflow ratio even at I mm/hr rainfall intensity. Comparing treatment efficiencies for suspended solids, all media showed similar removal ranged from 91 % to 95%. However, J-P seems to be better than the other media considering its higher water permeability. J-P and P-F, both hydrophobic, yielded over 76% of heavy metal removal. But, the hydrophilic media B-P showed much smaller removal ranging from 26% to 47%. This indicates that J-P and P-F are beneficial to remove heavy metal due to their hydrophobic property. The treatment efficiencies over PAHs (poly aromatic hydrocarbons) showed the similar removal efficiency ranging from 66% to 97% for all three media.

• 생물환경조절학회지
• /
• 제13권1호
• /
• pp.51-55
• /
• 2004

식물의 조직배양에서 가장 널리 이용되는 MS 배지 등의 무기성분은 종속영양에 적합하도록 조성되었다. 그러므로 이들 배지가 혼합영양이나 독립영양 배양에는 부적합 할 수 도 있다. 광혼합영양 미세증식에서 배지에 첨가되는 당의 수준은 낮추고 배양기의 광과 $CO_2$ 수준은 올리며, 광합성의 의한 탄소의 획득을 증진시키기 위해 열록소가 있는 절편체를 이용한다. Factorial 실험에서 유기물 (OM, $m^{-3}$ 배지당 각각 0.5g의 thiamine, nicotinic acid 및 pyridoxine과 100g ${\cdot}$ $m^{-3}$ myo-inositiol)의 첨가(+)와 생략(_) 및 세 가지 수준의 당(0, 15 및 30 kg ${\cdot}$ $m^{-3}$)이 감자 소식물체의 생장에 미치는 영향을 조사하였다. 단엽단절 절편체를 0.1${\times}$$10^{-4}m^{-3}$의 MS 아가(8 kg ${\cdot}$ $m^{-3}$) 배지(증기소독 전 pH 5.80)배지가 담긴 유리 시험관(100mm${\times}$25mm)에 치상하여 직경 6mm의 가스투과 필터(5.1 air exchanges ${\cdot}$$h^{-1}$)가 부착된 투명한 필름으로 봉하여 배양하였다. 배양체는 27일간 $23^{\circ}C$, 50% RH에서 16 h ${\cdot}$ $d^{-1}$의 명기 동안에 cool white 형광등으로 130${\mu}mol\;{\codt}\;m\;{\codt}\;s^{-1}$ PPFD의 광과 350-450${\mu}mol\;{\codt}\;mol^{-1}의CO_2$가 공급되는 배양실에서 배양되었다. 유기물이 공급된 처리(+OM)와 공급되지 않은 처리(-OM)에서 감자 소식물체의 생육은 유사하였으나 배지의 pH는 후자에서 0.2 더 낮았다. 배지에 첨가된 당의 수준이 증가할수록 건물중, % 건물율 및 경경은 증진된데 반해 신초와 뿌리의 건물중 비율, 엽면적, 건물중당 엽록소 함량 및 배지의 pH는 감소하였다. 유기물과 당 수준간의 상호작용도 신초길이와 배지 pH에서 관찰되었다. 이상의 결과로부터 광도와 $CO_2$농도를 높인 광혼압영양배양에서 감자 소식물체의 생장에는 배지에 첨가되는 당은 유익하지만 그 이외의 유기물은 첨가하지 않아도 악영향이 없다는 것은 나타낸다.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.87-98
• /
• 2024

본 연구는 리그노셀룰로오스 섬유와 굴참나무 수피-기반 활성탄(COA)으로 제조한 3층 섬유판에 한지를 조합하여 제작한 섬유판 필터세트의 미세먼지(PM), 휘발성 유기화합물(TVOC), 폼알데하이드(HCHO) 여과능을 조사하기 위하여 수행하였다. 단백질계 접착제를 적용하여 표층에 목섬유 그리고 심층에 재생섬유/COA로 제조한 섬유판(WRF)과 한지로 제작한 섬유판 필터세트는 일반향의 연소에 의하여 발생하는 상기 오염물질을 효과적으로 여과하였다. 섬유판 제조에 있어 표층/심층에 적용되는 접착제의 함지율을 4%/4%, 5%/3%, 6%/2%로 조절하여 WRF를 제조한 후, 이를 한지와 함께 WRF-기반 필터세트 제작에 이용하였다. 이 필터세트의 PM, TVOC, HCHO 여과능은 심층의 함지율이 감소함에 따라 향상되었다. 한편 WRF-기반 필터세트 구성에 있어 45 g/m² 평량의 한지보다 25 g/m² 평량의 한지(KP-25g)를 사용하여 제작한 필터세트에서 여과능이 우수하였다. 표층에 재생섬유와 심층에 목섬유/COA로 제조한 섬유판(RWF)과 KP-25g로 구성한 섬유판 필터세트의 여과능은 WRF와 비교하여 높았다. 소형 실내공간 및 대형 옥외공간에 WRF-기반 섬유판 필터세트 및 무필터 조건과 함께 측정한 PM 및 TVOC 여과능은 RWF-기반 섬유판 필터세트에서 높았다. 따라서 RWF와 KP-25g를 조합하여 제작한 섬유판 필터세트가 실내외 공간에 존재하는 PM, TVOC 여과용 필터로서 적용이 가능할 것으로 생각한다.