• 한국환경과학회지
• /
• 제16권5호
• /
• pp.561-569
• /
• 2007

This study used SCS-CN method to estimate the real recharge of the study area which is one of the most reasonable techniques to estimate groundwater recharge when there is no available runoff data in a watershed. From the results of tile real recharge analysis for the study area using SCS-CN method, it was analyzed that the year 1994 when the drought was severe shotted the lowest recharge of 106.3mm with recharge rate of 12.4%, and the highest recharge of 285.6mm with recharge rate of 21.8% occurred in 1990. Yearly average recharge of 213.2mm was obtained, and tile average recharge rate was 16.9%/year. KOG-FLOW model which has powerful post process functions consists of setting environments for input parameters in Korean language, and help function is added to each input data. Detailed information for each parameter is displayed when the icon is placed on the input parameters, and geologic boundaries or initial head data for each layer can be set easily on work sheet. The relative errors (R. E.) for each model's observed values and calculated values are $0.156{\sim}0.432$ in case of KOG-FLOW, and $0.451{\sim}1.175$ in case of WINFLOW, therefore it is known that KOG-FLOW model developed in this study produced results compared to observed head values.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.19-23
• /
• 2005

To minimize the weld defect in manufacturing of the welded tube by using $CO_2$ laser, the monitoring of the welding quality and the seam tracking along the butt-joint lengthwise to the tube axis are studied. The longitudinal butt-joint is shaped from $60kgf/mm^2$ grade steel sheet by 2 roll bending method, and welded by the $CO_2$ laser welding system equipped with the seam tracker and plasma sensor. The laser welded tube has the thickness of 1.5mm, diameter of 105.4mm and length of 2000mm. The precise positioning of the laser beam on the butt-joint to be assembled is obtained within $200{\mu}m$ by the laser vision sensor. The artificial defects in the butt-joint are well observed by the signal of plasma intensity measured from the plasma sensor of UV wavelength range within 400nm. The developed $CO_2$ laser tube welding system has the function of the precision seam tracking and the real-time monitoring of the welding quality. In conclusion, the laser welded tube can be used for manufacturing of automobile chassis and components after hydro-forming.

• 공학논문집
• /
• 제3권1호
• /
• pp.29-41
• /
• 1998

본 논문은 SGML(Standard Generalized Markup Language) 문서를 DSSSL(Document Style Semantics and Specification Language)에 기반하여 포맷팅 처리하기 위한 SGML 문서 표현 시스템의 설계 및 구현에 관한 것이다. ISO(International Standard Organization)에서는 SGML 문서의 변환 및 포맷팅 처리의 기술을 위한 표준으로 DSSSL을 제안하였다. 이에 본 논문에서는 DSSSL 표준에서 정의한 모델에 따라 시스템을 설계하였고, SGML 문서를 온라인으로 포맷팅 처리하는 시스템을 개발하였다. 본 시스템은 한글 처리를 지원하면서 임의의 DTD(Document Type Definition), SGML 문서, DSSSL 스타일 시트에 대한 파싱 기능을 가지며, 텍스트뿐만 아니라 표, 목록, 그림 등 다양한 명세 표현을 처리할 수 있는 포맷터를 포함한다.

• 열처리공학회지
• /
• 제5권3호
• /
• pp.171-178
• /
• 1992

The effect of nozzle characterristics on the mist-cooling heat transfer was investigated under the various flow conditions. Two different types of twin fluid nozzle were used, one is a $90^{\circ}$ angle tip nozzle with needle and the other is a $90^{\circ}$ angle tip non-needle nozzle. The cooling rate from the heated surface was measured and obtained the boiling curve as a function of surface temperature. An immersion sampling was employed for the measurement of droplet size of the spray. As a result of this experiment, the liquid sheet type nozzle shows better atomization when the mass ratio Mr>2.0, and collects more liquid droplets on the heated surface that results in better cooling effect. It was found that the maximum heat flux and heat transfer coefficient increased with increase in the volumetric flow rate, whereas the maximum heat flux decreased with increase in spray distance. The cooling effect depends upon the amount of collected droplet and droplet size, but it strongly depends upon the amount of collected droplet.

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.276-282
• /
• 2010

There are the impregnating layer formation by surface protective materials or impregnants and the adhesion method by polymer, FRP sheet or steel plate in the surface protective method of concrete structure. The surface impregnation method by impregnants improves the durability of concrete structure by modifying the structure of the concrete surface and also have a merit that can be shortly applied in place without the decrease of concrete surface appearance and is easily applied again. This study is interested in manufacturing the concrete surface impregnants including lithium and potassium silicate for the repair of the exposed concrete and the color concrete requiring the advanced function in view of the concrete appearance. The durability and porosity properties was tested for the review of application. The result of this study show that the effective content of silicate ranges 5 to 20% and the separate application of the first impregnant and the second impregnant is effective for the optimum performance. The adhesion in tension is slightly increased but the reinforcement of concrete substrate is slight. So, the concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.

• 대한치과의사협회지
• /
• 제38권6호통권373호
• /
• pp.549-557
• /
• 2000

ㆍPurpose: This study was performed to investigate the initial conservative treatment for TMD patients using careful counselling and medication prospectively. ㆍMaterials and Methods: Careful counselling and medication were performed in 51 TMD patients and 27 patients had follow-up check 2 months or more. Diagnosis of TMD was based on medical history and, physical and radiographic examination. TMD included masticatory disorder, internal derangement, degenerative joint disease, inflammatory joint disorder. and problems resulting from extrinsic trauma. All patients had chief complaints of TMJ pain, mouth-opening limitation. joint noise, and/or referred pain. We counselled and explained to the patient about the pathogenesis, etiologic factors, diagnosis and treatment plan for abut 10 minutes. We prescribed nonsteroidal anti-inflammatorv analgesic(Somalgen) and amitriptyline 10mg per day for 2 weeks. We informed the patient of the attention sheet and taught self-exercise of jaw. The patient were assessed by answering the questionnaire of subjective evaluation of TMD & maxillofacial pain. Questionnaire of an activity limitation. Questionnaire of a jaw function, and Questionnaire for the evaluation of TMD. ㆍResults: In questionnaire for the evaluation of TMD, 88.5% of 26 patients answered that the treatment was efficacious. 71.4% of 21 patients answered no problem in everyday life. There were significant differences between pretreatment and final follow-up in the evaluation of the subjective pain in the following sections: opening widely, chewing, resting, morning, masticatory muscle, and temporal portion(SAS program, paired T-test, P = 0.05). ㆍConclusions: Considerate counselling and proper medication could be significantly effectve in the initial treatment of TMD.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.410-414
• /
• 2013

Rapid thermal processing (RTP) abruptly decreases the time required to perform solar cell processes. RTP were used to form emitter of crystalline silicon solar cells. The emitter sheet resistance is studied as a function of time and temperature. The objective of this study is reduction of doping process time with same performance. Emitter difRapid thermal dfusion was carried out by using a spin on doping and a RTP. iffusion was performed in the temperature range of $700{\sim}750^{\circ}C$ for 1m 30s~15 m. Thermal budgets yielded a $50{\Omega}/sq$ emitter using a P509 source. To reduce process time and get high efficiency, rapid thermal diffusion by IR lamp was employed in air atmosphere at $700^{\circ}C$ for 15 m.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.1-8
• /
• 2017

Bifurcation refers to wye division of penstock to divide the flow symmetrically or unsymmetrically into two units of turbine for maintaining economical, technical and geological substrates. Particularly, water shows irrelevant behavior when there is a sudden change in flow direction, which results into the transition of the static and dynamic behavior of the flow. Hence, special care and design considerations are required both hydraulically and structurally. The transition induced losses and extra stresses are major features to be examined. The research on design and analysis of bifurcation is one of the oldest topics related to R&D of hydro-mechanical components for hydropower plants. As far as the earlier approaches are concerned, the hydraulic designs were performed based on graphical data sheet, head loss considerations and the mechanical analysis through simplified beam approach. In this paper, the multi prospect approach for design of Bifurcation, incorporating the modern day's tools and technology is identified. The hydraulic design of bifurcation is a major function of dynamic characteristics of the flow, which is performed with CFD analysis for minimum losses and better hydraulic performances. Additionally, for the mechanical design, a simplified conventional design method as pre-estimation and Finite Element Method for a relevant result projections were used.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.109-119
• /
• 2015

A wide variety of fashion materials focus on good drape property and softness. Among the recently emerging materials, Neoprene that consists of laminated knit on both sides of foamed neoprene sheet seeks a unique appearance that is considerably deviated from the current flow. Diverse processing methods for the newly released material heighten the value in function and beauty among trends of fashion materials by enhancing the appearance, touch and material property. Laser-cutting technique is one of the processing methods that is consistently used in the textile area. This study aimed to find the basic materials for applicability of laser-cutting technique to clothing goods after consideration of the changes in material property and drape shape, and to furthermore enforce different pattern conditions to Neoprene material, one of the newly attractive materials in the fashion area. In this study, we applied laser-cutting technique to Neoprene material sample under different conditions of pattern appearance, size and distance, based on current evaluation and theoretical background of Neoprene material, fashion trend and laser-cutting technique. Drape property can improve and the drape direction could also be controlled by a wide variety of laser-cutting techniques applied to Neoprene materials that have uniquely different appearances from most other textiles. This technique could be applied to the design for diversification of Neoprene clothing goods in the future.

• 소성∙가공
• /
• 제8권3호
• /
• pp.269-275
• /
• 1999

A variable blank holding force method is proposed to improve deep drawing characteristics of sheet materials. In this method, the blank holding force (BHF) is controlled throughout a drawing process so that the punch load does not exceed a critical value, which is slightly less than the conventional process with the conforming process with the variable BHF is more flexible than the conventional process with the constant BHF and it could be used for improving the product's quality and drawability. In this paper we suggest a method controlling the BHF as a function of punch travel during the forming process. The optimization BHF curves are determined theoretically and experimentally. It is concluded that for the case of optimum BHF control methods the drawn cup height and the drawing formability achieved by this method are increased than those for constant BHF method. Also, as comparing the wall thickness distribution of the cup drawn by the constant BHF and the optimum BHF control, the BHF control reduce the wall thickness variation of the drawn cup at the cup wall and make the cup thickness distribution more uniformly than the constant BHF.