• 제목/요약/키워드: Sheath characteristics

검색결과 216건 처리시간 0.023초

혼합송전선로 편단접지 구간 과전압 저감 방안에 관한 연구 (A Study on Overvoltage Reduction Method of Single Point Bonded Section on Combined Transmission Lines)

  • 정채균;강지원;박흥석;김진
    • 전기학회논문지
    • /
    • 제58권10호
    • /
    • pp.1881-1887
    • /
    • 2009
  • This paper discusses the effects of ECC (Earth Continuity Conductor) for reducing the level of induced sheath overvoltages at the single point bonded section of combined transmission lines which are mixed underground power cable with overhead line in one T/L. In previous papers, the characteristics of ECC on only underground power cable systems were sufficiently analyzed. However, the result of only underground power cable systems are totally different from that of combined transmission lines because ECC is commonly grounded with overhead grounding wire at mesh of cable head. Therefore, in this paper, the installation effects of ECC have been variously analyzed considering the three kinds of fault positions, cable formation of duct and trefoil, spacing between phase conductor and ECC, and the change of overhead transmission line section length on 154kV combined transmission line. Finally, simulation results show that ECC can effectively reduce the induced sheath voltage.

복합 유체-입자(몬테칼로)법을 이용한 유사스파크 방전의 기동 특성 해석 (Ignition Characteristics Analysis of Pseudospark Discharge using Hybrid Fluid-Particle(Monte Carlo) Method)

  • 주흥진;심재학;강형부
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 추계학술대회 논문집
    • /
    • pp.270-274
    • /
    • 1997
  • The numerical model that can describe the ignition of the pseudospark discharge using hybrid fluid-particle method has been developed. The evolution process of the discharge has been divided into four phases along the potential distribution. After the plasma enters in the hollow cathode, the confining effect which is one of hollow cathode properties occurs and the electron current on anode rises rapidly. As the plasma expands successively, the sheath contracts and as the electric field in the sheath increases, the field-enhanced thermionic emission(Schottky emission) occurs. From numerical results, the physical mechanism that causes the rapid current rise in the ignition of the pseudospark discharge could be identified.

  • PDF

Performance Evaluation of Batch Pulp Digester using By-product (Sheath) from Bamboo Laminate Production

  • Fatoki, Jimoh Gbenga
    • Journal of Biosystems Engineering
    • /
    • 제43권4호
    • /
    • pp.362-368
    • /
    • 2018
  • Purpose: Self-sufficiency in paper production is desired in Nigeria. This study was aimed at evaluating the performance of a locally fabricated batch pulp digester. Methods: The pulp yields of sheaths generated as waste in the production of bamboo (Bambusa vulgaris) laminates were determined at different liquor concentrations and treatment time after preliminary experiments to ascertain the conditions under which the sheath started to pulp. Moreover, the optimum pulping conditions and fiber characteristics were determined and estimated, respectively, to ascertain the pulp fiber suitability for paper production. Results: An optimum pulp yield of 65.1% was obtained at 50% NaOH and 25% $Na_2S$ liquor concentration (w/w) when the cooking time was 4 h. The results of fiber characterization of the pulp indicated an average fiber length of 2.19 mm with a low Runkel ratio of 1.63, both of which signify the suitability of the pulp for medium quality paper production. Conclusions: Softwood pulp can be blended with the fibers to improve the strength of the produced paper; further investigation should be carried out to use other non-woody plants for pulp and papermaking.

Billet 장입 방식을 이용 제조한 Bi(Pb)-Sr-Ca-Cu-O 초전도 선재의 특성 (Characteristics of Bi(Pb)-Sr-Ca-Cu-O Superconductor Wire Fabricated using the Billet Insertion Method)

  • 장건익;유재근;홍계원
    • 한국세라믹학회지
    • /
    • 제33권4호
    • /
    • pp.471-477
    • /
    • 1996
  • During Bi(Pb)-Sr-Ca-Cu-O superconductor wire fabrication the effect of the initial packing density on the final characteristics of superconductor wire was systematically studied. To increase the powder packing density with uniform distribution of superconducting core a billet insertion method processed by CIP was applied instead of the commonly used vibration and ramming method of powder insertion into silver sheath. Compared with the vibration and ramming method the billent insertion technique processed by CIP cause the 30% incre-specimen with 130${\mu}{\textrm}{m}$(core thickness : 45 ${\mu}{\textrm}{m}$)and 5.24 mm width processed at 84$0^{\circ}C$for 200hrs. shows specimen with 130${\mu}{\textrm}{m}$ (core thickness ; 45${\mu}{\textrm}{m}$)and 5.24 mm width processed at 84$0^{\circ}C$ for 200 hrs. shows maximum 34A for Ic and 16, 700 A/cm2 for Ic measured at 77K and 0T. Also the sample rolled 3 times shows maximum 7, 2A for Ic and 11, 000 A/cm2 for 77K and 0T. Based on X-ray experimental results the formation of Bi-2223 and texture were significantly well developed at the interface between the superconducting core and silver sheath as compared with those of the interior area of superconducting core.

  • PDF

Numerical Simulation of the Characteristics of Electrons in Bar-plate DC Negative Corona Discharge Based on a Plasma Chemical Model

  • Liu, Kang-Lin;Liao, Rui-Jin;Zhao, Xue-Tong
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1804-1814
    • /
    • 2015
  • In order to explore the characteristics of electrons in DC negative corona discharge, an improved plasma chemical model is presented for the simulation of bar-plate DC corona discharge in dry air. The model is based on plasma hydrodynamics and chemical models in which 12 species are considered. In addition, the photoionization and secondary electron emission effect are also incorporated within the model as well. Based on this model, electron mean energy distribution (EMED), electron density distribution (EDD), generation and dissipation rates of electron at 6 typical time points during a pulse are discussed emphatically. The obtained results show that, the maximum of electron mean energy (EME) appears in field ionization layer which moves towards the anode as time progresses, and its value decreases gradually. Within a pulse process, the electron density (ED) in cathode sheath almost keeps 0, and the maximum of ED appears in the outer layer of the cathode sheath. Among all reactions, R1 and R2 are regarded as the main process of electron proliferation, and R22 plays a dominant role in the dissipation process of electron. The obtained results will provide valuable insights to the physical mechanism of negative corona discharge in air.

복합사를 이용한 난연 직물의 제조와 특성 (Fabrication and Characteristics of Flame Retardant Fabric Developed by using Bicomponent Filament)

  • 이신희
    • 한국염색가공학회지
    • /
    • 제25권2호
    • /
    • pp.110-117
    • /
    • 2013
  • The purpose of this study is to fabricate the flame retardant polyester fabric by thermal bonding with low melting component of flame retardant bicomponent filament(LMFRPC) and to describe the characteristics of thermal bonded fabrics. The fabrics were prepared with flame retardant polyester filaments(FRP) as warp and blended filaments of FRP and LMFRPC as weft. The LMFRPC have a sheath and a core wherein the core comprises a flame retardant polyester and the sheath comprises a thermoplastic polyester of low-melting point. In this study, we investigated the physical properties, melting behavior of filament, the effect of the component of FRP and LMFRPC on the thermal bonding, mechanical properties. Melting peak of LMFRPC showed the double melting peak. The thermal bonding of the fabric formed at lower melting peak temperature of bicomponent filament of LMFRPC. The optimum thermal bonding conditions for fabrics was applied at about $170^{\circ}C$ for 60 seconds by pin tenter. On the other hand, the tensile strength, elongation, and LOI of the fabric increased with an increasing component of FRP of weft.

수도 신장 절위 경엽의 형태변이에 관한 연구 (Studies on the morphological variation of plant organs of elongating node-part in rice plant)

  • 김만수
    • 한국작물학회지
    • /
    • 제5권1호
    • /
    • pp.1-35
    • /
    • 1969
  • I. 강원도 춘천지방에서 주로 재배되는 수도 품종 20개를 공시재배하여 출수기에 신장절위(간선단으로부터 4 개절위)경엽에 대한 형태조사를 한 바 그 결과는 다음과 같다. 1. 공시한 20 개품종의 평균엽면적은 제 1 엽 18.61 $cm^2$, 제 2 엽 21.84 $cm^2$, 제 3 엽 21.52 $cm^2$, 제 4 엽 18.56 $cm^2$로서 제 2 엽과 제 3 엽이 크고 제 1 엽과 제 4 엽이 작았으며 엽신중은 제 1 엽 97.0 mg, 제 2 엽 118.1 mg, 제 3 엽 115.4mg, 제 4 엽 95.3 mg로서 엽위별의 비중은 전기 엽면적의 경우와 같았고 엽초중(절당)은 제 1 엽초 176.3 mg, 제 2 엽초 163.7 mg, 제 3 엽초 163.4 mg, 제 4 엽초 123.9 mg 로서 절위가 상승함에 따라 현저히 컸다. 또한 엽중(엽신+엽초)은 절위당 제 1 엽 273.3 mg, 제 2 엽 281.8 mg, 제 3 엽 278.8 mg, 제 3 엽 219.1 mg로서 엽위별의 제2 및 제3엽이 컸고 제1엽과 제4엽이 적었으며 고간중(엽신+엽초+간)은 제1절위 374.4 mg, 제2절위 418.2 mg, 제3절위 446.1mg 및 제4절위 362.1 mg로서 역시 중간절위가 크고 상위와 하위에서 적었다. 2. 신장 절위 경엽의 품종간 변이계수를 산출하여 본즉 엽면적에 있어서 12.75%, 엽신중 15.29%, 엽초중 15.90%, 절간중 11.42%, 엽중(엽신중+엽초중) 15.45% 그리고 엽중 13.24%였으며 각절위에 있어서 엽면적, 엽신, 엽초, 간중등의 품종간 변이계수는 간중을 제외하고는 모두 제2 및 제3절위에 있어서 작았고 제3 및 제4절위에서 컸으며 절간중에 있어서는 제3 및 제4절위의 변이계수가 작았다. 그리고 각 절위간 경엽의 변이계수는 엽면적 8.90%로서 가장 적고 엽신중 11.24%로서 적은 편이었으며 간중은 20.02%로서 가장 컸다. 3. 수도의 엽간중에 대하여 엽신 엽초 및 절간이 각각의 고유하는 중량의 비율은 29.2%로서 가장 높고 간중 34.2%, 엽신중 26.6%로서 낮으며 각 절위에 있어서도 각 부분이 점유하는 비율은 대체로 같은 경향이지만 엽신중의 비중은 제2엽에서 크고 엽초중은 상위절에 갈수록 간중은 반대로 하위절일수록 비중이 높았다. 4. 4개절위를 합한 엽신/간비는 77.7%, 엽초/간비 114.5%, 엽신/엽초비 67.9% 및 엽신/간+엽초비 36.2%이며 상위벌에서 엽신/간비 및 엽초/간비는 높고 엽신/엽초비는 하위절에서 높았다. 5. 수도의 신장 절위 경엽과 수량과의 관계는 전체엽면적의 4개엽과 정조수량과의 상관관계(r)는 0.666이었고 제1엽 및 제2엽은 0.659 및 0.609로서 각각 고도의 정(+)의 상관을 보였으며 제3엽과 제4엽은 0.464, 0.523으로서 유의상관을 인정하였으며 전체엽신중과 정조수량간에는 0.678, 제1엽 0.691, 제2엽 0.654, 제3엽 0.570으로서 각각 고도의 정(+)의 상관을 보였고 제4엽에 있어서는 0.544로서 유의상관을 보였으며 엽중(엽신중+엽초중)과 수량과의 상관은 엽면적의 경우와 동일한 경향을 보였고 엽간중과 수량과의 상관은 총고간중 및 제1절위고간중에서만 고도의 정(+)상관을 보였고 그 밑에 절위에서는 유의상관을 보였다. 한편 전체엽초중과 정조수량간에 있어서는 0.572, 제1엽초 0.623으로서 각각 고도의 정(+)상관을 보였고 제2, 제3 및 제4엽초에 있어서는 각각 0.486, 0.513 및 0.450 으로서 유의상관을 보였고 간중과 정조수량과의 상관은 모두 0.377 이하로서 낮은 상관을 보였다. 6. 수량계급에 따르는 품종들의 신장 절위 경엽의 평균치로 본 엽신중, 엽면적 1 $cm^2$당 엽신중, 엽초중, 간중, 엽중은 모두 다수품종에서 컸으며 중수>소수품종의 순위로 낮았고 각 절위별에 있어서도 대체로 같은 경향을 보였으며 그들에 있어서의 절위간변이는 엽면적, 엽신중, 엽초중, 간중 모두 다수품종에서는 현저히 적고 중수 및 소수품종에서 컸다. 7. 수량계급에 따르는 품종들의 식물체지상부 구성비율 즉, 엽신, 엽초, 엽간이 각각 점유하는 비율은 다수품종에 있어서 엽신 27.6% 엽초 39.5%, 간 32.9%인데 비하여 소수품종은 엽신 25.5%, 엽초 38.1%, 간 36.4%이고 중수품종은 그들 중간적 값을 보였다. 8. 수량계급에 따르는 품종들의 엽신/간비, 엽초/간비는 다수품종은 높고 소수품종은 낮았으며 중수품종은 그들 중간을 보였다. II. 수도품종 신 2 호, 시로가네 및 진흥의 3개를 공시하여 10a당 실소를 8kg, 12kg 및 16kg의 3개수준으로 시용하여 신장 절위 경엽의 형태변이를 조사하는 한편 잎의 실소함량을 분석하여 그들과 수량과의 관계를 살펴 본 결과는 다음과 같다. 1. 신장 절위 경엽의 시용량에 따르는 3개 품종의 평균형태변이치는 총엽면적(선단으로부터 4개엽 총합)은 실소 8kg구에 비하여 2배비에서 16.5%의 증대를 보였으며, 총엽신중에 있어서도 거의 같은 비율의 증대를 각각 보였고, 총엽초중에 있어서는 2개비구 7.8%, 1.5 개비구 4.9%의 증대를 보였고, 각엽위별에 있어서도 전자와 비슷한 경향을 보였다. 한편 간중은 반대로 2개비구 11.2%, 1.5개비구 1.5%씩 각각 감소되었으며, 그 정도는 특히 하위절위에서 현저하였다. 2. 각 품종의 신장 절위 경엽이 시비량에 따르는 변이계수는 총엽면적에 있어서는 제002 15.40%, 시로가네 12.87% 및 진흥 10.99%였고, 각 절위별로 엽신의 변이가 큰 것은 신 002는 제4엽, 시로가네는 제2엽, 진흥은 제1엽으로서 품종간에 차이가 있었다. 총엽신중의 변이계수는 총엽면적의 경우와 같은 경향을 보였고, 총간중의 변이계수는 제002 7.72%, 시로가네 12.11% 및 진흥 0,94% 이였으며 각 절위별 변이의 정도도 품종에 따라 다르다. 3. 신장 절위 경엽의 시비량에 따르는 절위간 변이는 엽면적, 엽신중, 간중 모두 N8kg인 소비조건에서 변이가 크고 N16kg인 다비조건에서 적어졌으며 N12kg구는 이들 중간이고, 엽초중에 있어서는 다비조건에서 변이가 컸다. 4. 엽초중을 구성하는 엽신 엽초 및 절간이 각각 점유하는 비율은 시비량에 따라 다르며, 시비량의 증가에 따라 엽신중의 비율은 현저히 높아지고, 엽초중의 비율은 반대로 낮아진다. 5. 시비량에 따르는 공시품종의 신장 절위 경엽의 상호관계를 보면 엽신/간비는 소비구에서 낮고, 엽신/엽초비는 시비량의 증가에 따라 낮아지며, 엽초/간비는 높아지고 엽신/간십엽초중비율은 낮아졌다. 6. 시비량의 증가에 따라 공시품종 모두 신장절위의 엽면적, 엽신중, 엽초중은 증대되었다. 그에 따라 수량도 증가하는 경향을 보이고, 간중은 시비량 증가에 따라 감소되고 수량은 반대로 증대되는 경향을 보이는데 그 정도는 품종에 따라 차이가 있다. 7. 출수기 및 성숙기에 있어서의 잎의 실소함량은 시비량에 따라 다르며, 공시품종 평균실소함량은 출수기에 있어서 N8kg 시비구 2.74%, N12kg 시비구 2.49는 각구 0.80%, 0.92% 및 1.03%로서 증비에 의하여 실소함량이 현저히 증가되고 있으며, 엽위별에 있어서는 상위엽일수록 높았다. 8. 잎의 실소 함량은 품종간에 차이가 있는데, 동일품종내에서는 출수기와 성숙기에 있어서 그 함량이 높을수록 수량이 증대되였다.

  • PDF

비전형적 거대세포종의 치험례 (Atypical Giant Cell Tumor: A Case Report)

  • 황소민;안성민;정필구;오경석;김진형
    • Archives of Plastic Surgery
    • /
    • 제34권6호
    • /
    • pp.796-798
    • /
    • 2007
  • Purpose: Giant cell tumor is the second most common benign neoplasm in upper extremity. Unlike usual chief complaint of painless mass, an atypical case with giant cell tumor presented a distinguishing characteristics of which accompany pain and tenderness and is histologically giant-cell free. Methods: A 31-year-old male patient complained of a rapid growing painful mass on the proximal phalanx of the left ring finger. Under microscopic operation, a $1.6{\times}1.3cm$ sized mass was found to be surrounded by areolar tissue and attached to a tendon sheath, encircling the digital nerve and artery. Diagnostic confirmation was assisted by positive finding in histologic immunohistochemical stain-CD68. Characteristic pathologic finding is an atypical distribution of spindle cells & histiocytes without giant cells in fascicular pattern. Results: Giant cell tumor was carefully removed under microscopic approach, while preserving digital nerve & artery. In postoperative 13th month, the patient presented with a 6mm of static two-point discrimination test, similar to that of the adjacent fingers. Conclusion: We report an atypical case with painful mass on tendon sheath, surrounding the digital nerve and artery that was diagnosed of giant cell tumor, but without giant cells on pathology. This case provides broader understanding of the giant cell tumor that should not only rely its typical findings of the painless mass and positive sign on H&E stain.

PSII 펄스 시스템의 동적 플라즈마 부하 회로 모델 개발 (Development of a Circuit Model for the Dynamic Plasma Load in a PSII Pulse System)

  • 정경재;최재명;황휘동;김곤호;고광철;황용석
    • 한국진공학회지
    • /
    • 제15권3호
    • /
    • pp.246-258
    • /
    • 2006
  • 음의 고전압의 인가에 따라 반응하는 동적 플라즈마를 부하로 갖는 PSII(plasma source ion implantation) 펄스 시스템을 분석하기 위한 회로 모델을 개발하였다. 플라즈마 내에 삽입된 평판 전극 앞에서의 플라즈마 쉬스의 움직임은 동적 차일드-랑뮤어 쉬스 모델을 따르는 것으로 가정하였다. 표적 전극에 흐르는 전류는 전극에 인가되는 전압과 서로 영향을 주며 변하므로 동적 플라즈마 부하를 전압 의존 전류 원으로 표현하여 자기모순이 없는 회로 모델을 구현하였다. 회로 해석은 Pspice 프로그램을 이용하여 수행하였으며, 다양한 플라즈마 조건과 펄스인가 조건에서의 실험 결과와 비교하여 회로 모델의 타당성을 검증하였다.