• Development and Reproduction
• /
• v.3 no.1
• /
• pp.53-58
• /
• 1999

The androgenic gland secretes a hormone, androgenic gland hormone, which is believed to act on the differentiation of the primary, secondary, and behavioral sex characteristics in most malacostracan crustaceans. This report presents the ultrastructural morphology of the androgenic gland in the freshwater prawn Macrobrachium nipponense. This gland, located in the coxopodite of the last pair of walking legs, was attached to the subterminal region of the sperm duct. The gland was composed of simple cellular strands, encased by a fibrous sheath. Microvilli were situated in the fibrous sheath, especially at the edge of each cellular strand. The androgenic gland cells had the large and round nucleus and rough endoplasmic reticulum arranged either in spirals or in concentric circles throughout the cytoplasm of the cell. They also had the well-developed Golgi complex and long mitochondria with flat and transverse cristae. The Golgi complex was similar to microvesicular cluster, but usually in the shape of typical dictyosomes, These features of androgenic gland cells coincides well with the protein/peptide secretion in their function. However, despite the apparent ultastructual equipment for protein/peptide secretion, no accumulation of materials secreted were noticed in the cytoplasm. Therefore it is strongly suggested that the transient transportation of the materials into the hemocoel has occurred just after synthesis.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.1
• /
• pp.16-21
• /
• 1999

Seed-propagation of Solomon's seal (Polygonatum odoratum) takes 2 years to shorten the period for becoming a practical method. The experiment was done to establish a proper method of breaking the epicotyl dormancy in bulk seed-propagation. Seedlings with a bulbil were treated with $GA_3$ every 2 days for 4 or 8 days and chilling treatments at $3^{\circ}C$ were enforced for 4, 6, 8 or 12 weeks. Emergence- and growth-related characteristics were examined immediately after the treatments, 3 and 6 weeks later. Rate of cotyledonary sheath rupture immediately after $GA_3$ treatment was greater in its 8-day treatment than in 4-day although its effect disappeared later. However, any epicotyl treated with $GA_3$ solution did not elongate so that new seedlings disemerged over the bed soil. That resulted from not breaking the epicotyl dormancy since $GA_3$ did not rupture all of the cotyledonary sheath formed with several sheets and consequently, the solution did not reach it. The $GA_3$ treatment for bulk seed-propagation, therefore, was impractical method. On the contrary, the chilling treatment was able to be applied to the seed-propagation because of getting the cotyledonary sheath rupture and the epicotyl elongation. Seedling emergence and its growth after chilling treatment were influenced by chilling period although required at least over 6-week treatment for satisfactory results.

• The Korean Journal of Mycology
• /
• v.47 no.3
• /
• pp.259-269
• /
• 2019

Brown spot and sheath rot of rice are caused by fungal pathogens such as Curvularia lunata, Cochliobolus miyabeanus, and Sarocladium oryzae, and cause losses such as reduced rice yield and quality, which is an enormous problem with serious long-term effects. To search biological control agents of phytopathogenic fungi, five kinds of useful Bacillus-like isolates which are excellent in extracellular enzyme activity and produce siderophore were selected from paddy soil of Sunchang in Korea. The selected isolates were tested for excellent antifungal activity against three of the phytopathogenic fungi that frequently occur in rice, and JSRB 177 strain had the most excellent antifungal activity. Based on the experimental results, JSRB 177 is finally selected as a candidate for biological control and identified to Bacillus subtilis through 16S rRNA sequence analysis. In addition, physiological characteristics of JSRB 177 confirmed by analysis of carbohydrate fermentation patterns and enzyme production ability. Based on the above results, JSRB 177 is expected to be used as a biological control agent for the rice pathogenic fungi. In the future, further studies related to industrialization such as port test and establishment of mass production process are needed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.185.2-185.2
• /
• 2016

The plasma density is an essential plasma parameter describing plasma physics. Furthermore, it affects the throughput and uniformity of plasma processing (etching, deposition, ashing, etc). Therefore, a novel technique for plasma density measurement has been attracting considerable attention. Microwave probe is a promising diagnostic technique. Various type of cutoff, hairpin, impedance, transmission, and absorption probes have been developed and investigated. Recently, based on the basic type of probes, modified flat probe (curling and multipole probes), have been developing for in situ processing plasma monitoring. There is a need for comparative study between the probes. It can give some hints on choosing the reliable probe and application of the probes. In this presentation, we make attempt of numerical study of different kinds of microwave probes. Characteristics of frequency spectrum from probes were analyzed by using three-dimensional electromagnetic simulation. The plasma density, obtained from the spectrum, was compared with simulation input plasma density. The different microwave probe behavior with changes of plasma density, sheath and pressure were found. To confirm the result experimentally, we performed the comparative experiment between cutoff and hairpin probes. The sheath and collision effects are corrected for each probe. The results were reasonably interpreted based on the above simulation.

• Nuclear Engineering and Technology
• /
• v.35 no.5
• /
• pp.426-441
• /
• 2003

A reactor inlet header break experiment, B9401, performed in the RD-14M multi channel test facility was analyzed using RELAP5/MOD3.2 and RELAP5/CANDU[1]. The RELAP5 has been developed for the use in the analysis of the transient behavior of the pressurized water reactor. A recent study showed that the RELAP5 could be feasible even for the simulation of the thermal hydraulic behavior of CANDU reactors. However, some deficiencies in the prediction of fuel sheath temperature and transient behavior in athe headers were identified in the RELAP5 assessments. The RELAP5/CANDU has been developing to resolve the deficiencies in the RELAP5 and to improve the predictability of the thermal-hydraulic behaviors of the CANDU reactors. In the RELAP5/CANDU, critical heat flux model, horizontal flow regime map, heat transfer model in horizontal channel, etc. were modified or added to the RELAP5/MOD3.2. This study aims to identify the applicability of both codes, in particular, in the multi-channel simulation of the CANDU reactors. The RELAP5/MOD3.2 and the RELAP5/CANDU analyses demonstrate the code's capability to predict reasonably the major phenomena occurred during the transient. The thermal-hydraulic behaviors of both codes are almost identical, however, the RELAP5/CANDU predicts better the heater sheath temperature than the RELAP5/MOD3.2. Pressure differences between headers govern the flow characteristics through the heated sections, particularly after the ECI. In determining header pressure, there are many uncertainties arisen from the complicated effects including steady state pressure distribution. Therefore, it would be concluded that further works are required to reduce these uncertainties, and consequently predict appropriately thermal-hydraulic behaviors in the reactor coolant system during LOCA analyses.

• BMB Reports
• /
• v.44 no.8
• /
• pp.541-546
• /
• 2011

It is generally accepted that spermatozoa capacitation is associated with protein kinase A-mediated tyrosine phosphorylation. In our previous study, we identified the fibrous sheath CABYR binding protein (FSCB), which was phosphorylated by PKA. However, the phosphorylation status of FSCB protein during spermatozoa capacitation should be further investigated. To this aim, in this study, we found that phosphorylation of this 270-kDa protein occurred as early as 1 min after mouse spermatozoa capacitation, which increased over time and remained stable after 60 min. Immunoprecipitation assays demonstrated that the tyrosine and Ser/Thr phosphorylation of FSCB occurred during spermatozoa capacitation. The extent of phosphorylation and was closely associated with the PKA activity and spermatozoa motility characteristics. FSCB phosphorylation could be induced by PKA agonist DB-cAMP, but was blocked by PKA antagonist H-89.Therefore, FSCB contributes to spermatozoa capacitation in a tyrosine-phosphorylated format, which may help in further elucidating the molecular mechanism of spermatozoa capacitation.

• Applied Microscopy
• /
• v.31 no.4
• /
• pp.367-374
• /
• 2001

Leaves of two developmental stages of Salsola species, young and mature, were examined to reveal the structural and functional relationships in the photosynthetic tissue using anatomical and ultrastructural criteria. Both young and mature leaves had Kranz anatomy of the Salsolid type with two layers of chlorenchyma on the leaf periphery: an outer layer of palisade mesophyll cells and an inner layer of compact bundle sheath cells with centripetally arranged organelles. The chlorenchyma was continuous in young leaves , while it was discontinuous in mature leaves. The main vascular bundle occupied the central position in the leaf. but the small peripheral vascular bundles were in contact with the chlorenchyma. Structural dimorphism of chloroplasts was obvious in bundle sheath cells of mature leaves exhibiting noticeable grana reduction, whereas mesophyll cell chloroplasts had well developed grana in all cases. Plasmodesmata were less numerous and rather simple in young leaves relative to well-developed secondary plasmodesmata of the later stage. According to the current data, features of two stages of Salsola leaves corresponded to NADP-ME bio-chemical subtype on the basis of photosynthetic cell ultrastructure. Implications of developing such anatomical and ultrastructural data of Sulsola species and biochemical characteristics reported in other C-4 species have been discussed.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.2
• /
• pp.138-143
• /
• 2012

Objective : This is a retrospective review of 22 surgically treated benign and malignant tumors of brachial plexus region to describe clinical presentation, the characteristics of brachial plexus tumor and clinical outcomes with a literature review. Methods : Twenty-one patients with consecutive 22 surgeries for primary brachial plexus tumors were enrolled between February 2002 and November 2011 were included in this study. The medical records of all patients were reviewed. Results : Eleven male and 10 female patients were enrolled. Mean age was 39 years. Three patients had brachial plexus tumor associated with neurofibromatosis (13.6%). Presenting signs and symptoms included parenthesis and numbness (54.5%), radiating pain (22.7%), direct tenderness and pain (27.2%), palpable mass (77.3%). Twelve patients presented preoperative sensory deficit (54.5%) and 9 patients presented preoperative motor deficit (40.9%). Twenty tumors (90.9%) were benign and 2 tumors (9.1%) were malignant. Benign tumors included 15 schwannomas (68.2%), 4 neurofibromas (18.2%) and 1 granular cell tumor (4.5%). There were 1 malignant peripheral nerve sheath tumor (MPNST) and 1 malignant granular cell tumor. Gross total resection was achieved in 16 patients (72.7%), including all schwannomas, 1 neurofibroma. Subtotal resection was performed in 6 tumors (27.3%), including 3 neurofibromatosis associated with brachial plexus neurofibromas, 1 MPNST and 2 granular cell tumor in one patient. Conclusion : Resection of tumor is the choice of tumor in the most of benign and malignant brachial plexus tumors. Postoperative outcomes are related to grade of resection at surgery and pathological features of tumor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.213-218
• /
• 2017

High-voltage power systems operate in order to generate and transmit electric power at power stations. Compared to low-power systems, high-power systems are complex in structure, large-scale, and expensive. When high-power cable accidents occur, most facilities are incapacitated-including low-power systems-causing huge economic losses. Great care must therefore be taken in designing, installing and managing power systems. Although dependent on installation circumstances and usage conditions, in some cases the cross-sectional areas of cables fall short of the critical area due to the expansion of and improper design and installation of power facilities. In this situation, the exceeded ampacity (allowable current) above the critical value caused by the operating current initiates the deterioration processes of power cables. In order to systematically monitor power cables operating at power stations, we have developed the first device of its kind in Korea. In this paper, we present the analyzed characteristics of expected temperatures of cables based on the load current of high-voltage cables operating at Korean Western Power Co. Ltd. We can predict the lifetime of cables by analyzing the temperature obtained from our device.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.197-201
• /
• 2017

The demand for electric power is increasing every year in Korea. All the systems adopted at power stations in order to generate and transmit electric power should operate in perfect condition or reliability. The device for transmitting the generated high-voltage electric power is 6 kV CV single core cables. The manufacturing companies of the cables makes an official announcement that the operating lifetime of their cables is about 30years. But from the moment of operation the deterioration precesses of worsening the characteristics of cables starts. Since the reliability for the status of installed cables in deterioration has not been diagnosed, the cables can be broken at any unexpected moments. In order to prevent the abrupt cable accident by systematically monitoring the cable status, we have invented the first device in Korea. We have installed our device at Korea Western Power Co. Ltd. in order to diagnose the live cables. In this paper, we present our research results of measured temperatures of inner conductor and surface and the compared results of those data with other cable company. We also show that our results agree with those made by other company.