• The Journal of the Acoustical Society of Korea
• /
• 제22권4E호
• /
• pp.167-175
• /
• 2003

Shear wave velocity was measured and grain size analysis was conducted on two core samples obtained in unconsolidated marine sediments of the western continental margin, the East Sea. A pulse transmission technique based on the Hamilton frame was used to measure shear wave velocity. Duomorph ceramic bender transducer-receiver elements were used to generate and detect shear waves in sediment samples. Time delay was calculated by changing the sample length from the transducer-receiver element. Time delay is 43.18 μs and shear wave velocity (22.49 m/s) is calculated from the slope of regression line. Shear wave velocities of station 1 and 2 range from 8.9 to 19.0 m/s and from 8.8 to 22 mis, respectively. Shear wave velocities with depth in both cores are qualitatively in agreement with the compared model〔1〕, although the absolute value is different. The sediment type of two core samples is mud (mean grain size, 8-9Φ). Shear wave velocity generally increases with sediment depth, which is suggesting normally consolidated sediments. The complicated variation of velocity anisotropy with depth at station 2 is probably responsible for sediment disturbance by possible gas effect.

• 비파괴검사학회지
• /
• 제26권5호
• /
• pp.336-342
• /
• 2006

축대칭 단축 응력은 이론적으로는 초음파 응력측정 기술에서 가장 단순한 대상이지만 두 횡파를 이용하는 기존의 초음파 복굴절 응력측정 기술은 축대칭 구조에서 사용되기 어렵다. 또한 선형 음탄성 이론에 근거한 초음파 진행거리 시간 측정방법 역시 적용에 한계가 있는 경우가 많은데 그 이유는 초음파 길이(ultrasonic length)와 재료의 음탄성 특성을 정확히 알아야 한다는 점 때문이다. 본 논문에서는 축대칭 구조의 고체내부에 축 응력이 존재할 때 나타나는 초음파 복굴절 특성을 음탄성 이론을 이용하여 분석하였다. 이를 위해 서로 다른 편광특성을 가지는 두개의 초음파가 축 방향으로 입사될 때 만들어지는 속도 변화를 음탄성 이론식으로부터 결정하고 이를 이용하여 축 응력과 복굴절 특성의 관계를 유도한 후 이 결과를 간단한 인장 실험결과로부터 검증하였다.

• 대한기계학회논문집A
• /
• 제21권4호
• /
• pp.673-678
• /
• 1997

Stress wave propagations in an elastic half space to a normal point force of ramp type in time are analyzed. The governing equations are transformed by applying the Laplace and Hankel transforms with respect to time and radial distance. The inversion of Laplace transforms are performed by employing the Cagniard-de Hoop method, where the Rayleigh waves at surface are obtained by including the residue terms. The stress waves computed at the location very cose to the surface are shown to be almost identical to the surface waves obtained by the residue method except the Rayleigh wavefront. It is found that at the surface, the stresses are dominated by the Rayleigh waves, whose amplitudes increase linearly with time when time is very large. It is also found that in the interior part, the radial stress has a logarithmic singularity at the shear wavefront, while tangential stress shows no singularity.

• 전산구조공학
• /
• 제2권3호
• /
• pp.85-95
• /
• 1989

본 논문에서는 Rayleigh파, 전단파 및 압축파의 영향을 동시에 해석할 수 있는 주파수 종속 무한요소와 이를 이용한 지반-구조물의 동적상호작용의 해석법에 대하여 연구하였다. 방사적으로 전파되는 응력파의 성분에 대한 무한요소와 아울러 매립(Embedded)기초나 적층(Layered)지반을 해석하기 위하여 수평으로 전파되는 파를 해석할 수 있는 무한요소를 개발하였고, 요소행렬 구성하기 위한 적분시 하나의 파성분만 존재하는 경우에 대하여 효율적으로 적용되었던 Newton Cotes 적분과 유사한 방법을 Multi-Waves 문제에 알맞게 확장 적용하였다. 이 방법의 타당성은 반무한, 균질 지만의 위에 놓여있는 원형강판과 지반에 묻혀 있는 원통형 강체기초의 Compliance 함수를 구하여 기존의 문헌에 발표된 값과 비교함으로써 검증하였다. 예제해석은 지진하중을 받는 원자력발전소 격납구조를 대상으로 하여 수행하였으며, 매립깊이의 크기, 지반의 재료감쇠 및 지반의 모형기법에 따른 구조물-지반의 상호작용의 해석결과를 비교 분석하였다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.637-646
• /
• 2023

At present, the research on wave propagation in graphene platelet reinforced composite plates focuses on the propagation behavior of bulk waves, in which the effect of boundary condition is ignored, there is no literature report on propagation behaviors of guided waves in graphene platelet reinforced metal foams (GPLRMF) plates. In fact, wave propagation is affected by boundary conditions, so it is necessary to study the propagation characteristics of guided waves. The aim of this paper is to solve this problem. The effective performance of the material was calculated using the mixing law. Equations of motion of GPLRMF plate is derived by using Hamilton's principle. Then, the eigenvalue method is used to obtain the expressions of bending wave, shear wave and longitudinal wave, and the degradation verification is carried out. Finally, the effects of graphene platelets (GPLs) volume fraction, elastic foundation, porosity coefficient, GPLs distribution types and porosity distribution types on the dispersion relations are studied. We find that these factors play an important role in the propagation characteristics and phase velocity of guided waves.

• Structural Engineering and Mechanics
• /
• 제90권2호
• /
• pp.209-218
• /
• 2024

The present paper is focused on the study of the propagation of plane waves in thermoelastic media under a modified Green-Lindsay (MG-L) model having the influence of non-local and two temperature. The problem is formulated for the considered model in dimensionless form and is explained by using the reflection phenomenon. The plane wave solution of these equations indicates the existence of three waves namely Longitudinal waves (LD-Wave), Thermal waves (T-wave), and Shear waves (SV-wave) from a stress-free surface. The variation of amplitude ratios is computed analytically and depicted graphically against the angle of incidence to elaborate the impact of non-local, two temperature, and different theories of thermoelasticity. Some particular cases of interest are also deduced from the present investigation. The present study finds applications in a wide range of problems in engineering and sciences, control theory, vibration mechanics, and continuum mechanics.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.771-776
• /
• 2012

A technique is presented that uses a circular waveguide for the measurement of the bulk shear(S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fumdamental T(0,1) mode that propagates along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using T(0,1) mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities as a function of depths are formulated using power law curves.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1417-1421
• /
• 2008

Temperature variation affect the response of asphalt pavement and should be considered in the evaluation of performance of the pavement. In this paper, HWAW method is applied to evaluate shear wave velocity(or shear modulus) of the asphalt pavement with temperature. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. This method minimize effect of noise and is not affected by mode jump effect which cause erroneous result when surface wave method is applied to pavement evaluation. In order to estimate the applicability of HWAW method, field tests were performed in 1 site and preliminary correlation between shear wave velocity(shear modulus) and asphalt pavement average temperature.

• Structural Engineering and Mechanics
• /
• 제54권3호
• /
• pp.491-500
• /
• 2015

Under seismic loading, underground station structures behave differently from above ground structures. Underground structures do not require designated energy dissipation system for seismic loads. These structures are traditionally designed with shear or racking deformation capacity to accommodate the movement of the soil caused by shear waves. The free-field shear deformation method may not be suitable for the design of shallowly buried station structures with complex structural configurations. Alternatively, a station structure can develop rocking mechanisms either as a whole rigid body or as a portion of the structure with plastic hinges. With a rocking mechanism, station structures can be tilted to accommodate lateral shear deformation from the soil. If required, plastic hinges can be implemented to develop rocking mechanism. Generally, rocking structures do not expect significant seismic loads from surrounding soils, although the mechanism may result in significant internal forces and localized soil bearing pressures. This method may produce a reliable and robust design of station structures.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.111-122
• /
• 2009

지반에 포함된 입자의 용해작용은 흙의 강도를 저하시키고, 지하구조물의 침하를 발생시킨다. 본 논문에서는 입자용해시 혼합재의 물리적 특성 변화를 조사하고자 하였다. 침하량 측정과 전단파 측정과 같은 거시적 반응을 평가하기 위해, 소금과 모래로 구성된 혼합재를 사용하였다. 또한, 광탄성(photoelastic) 디스크와 얼음 디스크 혼합재를 이용하여 힘 연결고리(force chain), 간극, 접촉점수(coordination number), 그리고 수평력 변화와 같은 미시적 거동을 분석하였다. 소금-모래 혼합재에서 전단파는 압밀셀에 설치된 다단의 벤더 엘리먼트로 측정되었고, 광탄성 디스크-얼음 디스크 혼합재의 역학적 거동은 로드셀과 디지털 이미지를 이용하여 분석되었다. 실험결과, 소금의 용해시 전단파 속도는 초기에는 감소한 후에 증가한 후 일정한 값으로 수렴하였다. 용해가능 입자의 크기가 커질수록 그리고 입자패킹이 불규칙해질수록 입자용해시 수평력의 변화가 더 커지는 것을 알 수 있었다. 용해 후, 간극비는 증가했고, 접촉점수는 감소하였다. 본 연구에서는 힘 연결고리, 간극비, 접촉점수와 같은 입자의 거동변화가 전단파 속도와 전체시스템의 수평력 변화 같은 전체적인 거동에 영향을 주는 것으로 나타났다.